MBR30100PT thru MBR30200PT Wide Temperature Range and High Tjm Schottky Barrier Rectifiers A C A Dimensions TO-247AD A C A C(TAB) A=Anode, C=Cathode, TAB=Cathode MBR30100PT MBR30150PT MBR30200PT VRRM V 100 150 200 VRMS V 70 105 140 Symbol VDC V 100 150 200 Characteristics Maximum DC Reverse Current At Rated DC Blocking Voltage 0.780 0.819 0.800 0.845 C D 15.75 16.26 3.55 3.65 0.610 0.140 0.640 0.144 E F 4.32 5.4 5.49 6.2 0.170 0.212 0.216 0.244 G H 1.65 - 2.13 4.5 0.065 - 0.084 0.177 J K 1.0 10.8 1.4 11.0 0.040 0.426 0.055 0.433 L M 4.7 0.4 5.3 0.8 0.185 0.016 0.209 0.031 N 1.5 2.49 0.087 0.102 250 A 10000 V/us @TJ=25 oC @TJ=125 oC @TJ=25 oC @TJ=125 oC 0.85 0.70 0.98 0.85 V @TJ=25oC @TJ=125oC 0.05 10 mA Voltage Rate Of Change (Rated VR) IR 19.81 20.32 20.80 21.46 A Peak Forward Surge Current 8.3ms Single Half-Sine-Wave Superimposed On Rated Load (JEDEC METHOD) VF A B 30 @TC=125oC IFSM Maximum Forward Voltage (Note 1) Typical Thermal Resistance (Note 2) 2.2 CJ Typical Junction Capacitance Per Element (Note 3) 700 TJ Operating Temperature Range ROJC TSTG Inches Min. Max. Unit Maximum Average Forward Rectified Current IF=15A IF=15A IF=30A IF=30A Millimeter Min. Max. Maximum Ratings I(AV) dv/dt Dim. Storage Temperature Range o C/W pF -55 to +150 o -55 to +150 o NOTES: 1. 300us Pulse Width, Duty Cycle 2%. 2. Thermal Resistance Junction To Case. 3. Measured At 1.0MHz And Applied Reverse Voltage Of 4.0V DC. FEATURES MECHANICAL DATA * Metal of silicon rectifier, majority carrier conducton * Guard ring for transient protection * Low power loss, high efficiency * High current capability, low VF * High surge capacity * For use in low voltage, high frequency inverters, free whelling, and polarity protection applications * Case: TO-247AD molded plastic * Polarity: As marked on the body * Weight: 0.2 ounces, 5.6 grams * Mounting position: Any C C MBR30100PT thru MBR30200PT Wide Temperature Range and High Tjm Schottky Barrier Rectifiers 100 1000 REVERSE CURRENT, IR(mA) TJ=175J TJ=175J TJ=125J TJ=25J TJ=150J 1 TJ=125J TJ=100J 0.1 TJ=75J 0.01 TJ=50J TJ=25J 0.001 0.0001 0 20 40 60 80 100 REVERSE VOLTAGE, VR(V) 10 Figure 2. Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) JUNCTION CAPACITANCE, C T(pF) 1000 1 0.1 0 0.5 1 1.5 2 TJ=25J 100 2.5 0 20 FORWARD VOLTAGE DROP, V FM(V) 40 60 Figure 3. Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) 10 1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 0.1 D = 0.08 PDM t1 t2 0.01 Notes: 1.Duty factor D = t1 / t2 2.Peak Tj = PDM x ZthJC + TC SINGLE PULSE (THERMAL RESISTANCE) 0.001 0.0000 1 0.0001 0.001 80 REVERSE VOLTAGE, VR(V) Figure 1. Max. Forward Voltage Drop Characteristics (PerLeg) THERMAL IMPEDANCE ZthJC (C/W) INSTANTANEOUS FORWARD CURRENT, I F(A) 100 10 0.01 0.1 1 10 t1, RECTANGULAR PULSE DURATION (SECONDS) Figure 4. Max. Thermal Impedance ZthJC Characteristics (PerLeg) 100 100 MBR30100PT thru MBR30200PT Wide Temperature Range and High Tjm Schottky Barrier Rectifiers 14 180 AVERAGE POWER LOSS, WATTS ALLOWABLE CASE TEMPERATURE, D = 0.20 175 RTHJC(DC)=2.20 J /W 170 165 160 DC 155 150 145 140 0 5 10 15 20 25 30 35 D = 0.25 12 D = 0.33 D = 0.50 10 D = 0.75 8 RMS LIMIT DC 6 4 2 0 0 AVERAGE FORWARD CURRENT, IF (AV) Figure 5. Max. Allowable Case Temperature Vs. Average Forward Current (PerLeg) 2 4 6 8 10 12 14 16 18 20 22 24 AVERAGE FORWARD CURRENT, IF(AV) Figure 6. Forward PowerLoss Characteristics (PerLeg) NON-REPETITIVE SURGE CURRENT, IFSM(A) 1000 AT ANY RATED LOAD CONDITION AND WITH RATED V RRM APPLIED FOLLOWING SURGE 100 10 100 1000 10000 SQUARE WAVE PULSE DURATION, TP(micro sec) Figure 7. Max. Non-Repetitive Surge Current (Per Leg)