Plastic package.
Glass passivated junction.
30,000W Peak Pulse Power capability on 10/1000µs waveform.
Excellent clamping capability.
Repetition rate (duty cycle): 0.05%.
Low incremental surge resistance.
Fast response time: typically less than 1.0ps from 0 volt to BV.
High temperature soldering guaranteed: 265°C/10 seconds/.375",
(9.5mm) lead length, 5lbs., (2.3kg) tension.
M
Case: Molded plastic over glass passivated junction.
Terminals: Plated Axial leads, solderable per MIL-STD-750, Method 2026.
Polarity: Color band denotes cathode except Bipolar.
Mounting Position: Any.
Weight: 0.07 ounce, 2.3 grams.
D
For Bidirectional use C or CA suffix for type 30KPA30 through type 30KPA288 (e.g. 30KPA30C, 30KPA288CA);
Electrical characteristics apply in both directions.
M
6
UL E223045
FEATURES
MECHANICAL DATA
DEVICES FOR BIPOLAR APPLICATION
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
P600
Notes: 1. Non-repetitive current pulse, per Fig. 3and derated above TA=25 per Fig. 2.
22. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minute maximum.
°C
RATING SYMBOL VALUE UNIT
Peak Pulse Power Dissipation on 10/1000 s waveform.
(Note 1, Fig. 1) PPPM Minimum 0000 Watts
Peak Pulse Current on 10/1000 s waveform. (Note 1, Fig. 3) IPPM See Table Amps
Steady State Power Dissipation at TL=75 , Lead length .375”
(9.5mm).(Fig. 5) PM(AV) 8.0 Watts
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave
Superimposed on Rated Load.(JEDEC Method) (Note 2, Fig. 6) IFSM 400 Amps
Operating junction and Storage Temperature Range. TJ, TSTG -55 to +175
°C
°C
30,000
Transient Voltage Suppressors
0KPA Series
MERITEK
All specifications are subject to change without notice.
1
Rev 7
Millimeters Inches
Item Min. Max. Min. Max.
L 25.40 - 1.000 -
T 8.60 9.10 0.340 0.360
d 8.60 9.10 0.340 0.360
s 1.22 1.32 0.048 0.052
L L T
ds
DIA.
DIA.
P600
Part Number Reverse
Stand-Off
Voltage
Breakdown
Voltage
MIN.@IT
Test
Current
Maximum
Clamping
Voltage
@IPP
Peak
Pulse
Current
Reverse
Leakage
@ VRWM
UNI-POLAR BI-POLAR VRWM(V) VBR MIN (V) IT(mA) VC(V) IPP(A)
30KPA28A 30KPA28CA 28.0 31.28 50 50.0 606.0 5000
30KPA30A 30KPA30CA 30.0 33.51 50 55.2 548.9 5000
30KPA33A 30KPA33CA 33.0 36.90 50 58.5 517.9 5000
30KPA36A 30KPA36CA 36.0 40.20 50 61.8 490.3 5000
30KPA39A 30KPA39CA 39.0 43.60 20 67.2 450.9 2000
30KPA42A 30KPA42CA 42.0 46.90 10 72.0 420.8 1000
30KPA43A 30KPA43CA 43.0 48.00 10 73.0 415.1 1000
30KPA45A 30KPA45CA 45.0 50.30 5 77.4 391.5 250
30KPA48A 30KPA48CA 48.0 53.60 5 81.6 371.3 150
30KPA51A 30KPA51CA 51.0 57.00 5 86.4 350.7 50
30KPA54A 30KPA54CA 54.0 60.30 5 91.4 331.5 20
30KPA58A 30KPA58CA 58.0 64.80 5 92.4 327.9 20
PACKAGE DIMENSIONS
SPECIFICATIONS
IR(ȝA)
Transient Voltage Suppressors
0KPA Series
MERITEK
2
Rev 7
E
Note: For Bidirectional type having VRWM of 10 volts and less, the IR limit doubles.
Part Number Reverse
Stand-Off
Voltage
Breakdown
Voltage
MIN.@IT
Test
Current
Maximum
Clamping
Voltage
@IPP
Peak
Pulse
Current
Reverse
Leakage
@ VRWM
UNI-POLAR BI-POLAR VRWM(V) VBR MIN (V) IT(mA) VC(V) IPP(A)
30KPA60A 30KPA60CA 60.0 67.00 5 102.0 297.1 15
30KPA64A 30KPA64CA 64.0 71.50 5 104.0 291.3 10
30KPA66A 30KPA66CA 66.0 73.70 5 107.0 283.2 2
30KPA70A 30KPA70CA 70.0 78.20 5 109.0 278.0 2
30KPA71A 30KPA71CA 71.0 79.30 5 111.5 271.7 2
30KPA72A 30KPA72CA 72.0 80.40 5 114.0 265.8 2
30KPA75A 30KPA75CA 75.0 83.80 5 119.4 253.8 2
30KPA78A 30KPA78CA 78.0 87.10 5 129.0 234.9 2
30KPA84A 30KPA84CA 84.0 93.80 5 139.2 217.7 2
30KPA90A 30KPA90CA 90.0 100.50 5 146.4 207.0 2
30KPA96A 30KPA96CA 96.0 107.20 5 156.0 194.2 2
30KPA102A 30KPA102CA 102.0 113.90 5 165.6 183.0 2
30KPA108A 30KPA108CA 108.0 120.60 5 175.2 172.9 2
30KPA120A 30KPA120CA 120.0 134.00 5 194.4 155.9 2
30KPA132A 30KPA132CA 132.0 147.40 5 213.0 142.3 2
30KPA144A 30KPA144CA 144.0 160.80 5 223.2 135.8 2
30KPA150A 30KPA150CA 150.0 167.60 5 233.4 129.8 2
30KPA156A 30KPA156CA 156.0 174.30 5 245.0 123.7 2
30KPA160A 30KPA160CA 160.0 178.70 5 252.6 120.0 2
30KPA168A 30KPA168CA 168.0 187.70 5 272.4 111.2 2
30KPA170A 30KPA170CA 170.0 189.90 5 275.0 110.2 2
30KPA180A 30KPA180CA 180.0 201.10 5 290.4 104.3 2
30KPA198A 30KPA198CA 198.0 221.20 5 319.8 94.7 2
30KPA216A 30KPA216CA 216.0 241.30 5 348.6 86.9 2
30KPA240A 30KPA240CA 240.0 268.10 5 387.0 78.3 2
30KPA258A 30KPA258CA 258.0 288.20 5 416.4 72.8 2
30KPA260A 30KPA260CA 260.0 290.40 5 416.0 72.8 2
30KPA270A 30KPA270CA 270.0 301.60 5 436.2 69.5 2
30KPA280A 30KPA280CA 280.0 312.80 5 464.0 65.3 2
30KPA288A 30KPA288CA 288.0 321.70 5 469.9 64.5 2
r
0KPA Series
IR(ȝA)
Transient Voltage Suppressors
0KPA Series
MERITEK
3
Rev 7
Figure 1 - Peak Pulse Power Rating Curve
Figure 3 - Pulse Waveform
0
20
40
60
80
100
0 25 50 75 100 125 150 175 200
TA-Ambient temperature (ºC)
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage %
0.1
1
10
100
1000
0.000001 0.00001 0.0001 0.001
td-Pulse Width (Sec.)
Pppm-Peak Pulse Po wer (KW)
I
PPM - Peak Pulse Current, % I
RSM
0
0
50
100
150
1.0 2.0 3.0 4.0
t
r=10µsec
Peak Value
I
PPM
I
PPM
2
TJ=25°C
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of I
PPM
10/1000µsec. Waveform
as defined by R.E.A
t
d
t-Time (ms)
Half Value
I
PPM ( )
1
100
10000
0 50 100 150 200 250 300
VBR - Reverse Breakdown Voltage (V)
Cj, Junction Capacitance (pf)
Tj=25C
f=1.0MHz
Vsig=50mVp-p
Bi-directional
@ VR
Bi-directional V
= OV
Uni-directional V
= OV
Uni-directional @
VR
0
1
2
3
4
5
6
7
8
9
0 25 50 75 100 125 150 175 200
L
L
Steady State Power Dissipation (W)
TL- Lead Temperature (ºC)
0
50
100
150
200
250
300
350
400
450
1 10 100
Number of Cycles at 60 Hz
IFSM, Peak Forward Surge Current (A)
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
Figure 3 - Pulse Waveform Figure 4 - Typical Junction Capacitance
Figure 5 - Steady State Power Dissipation Derating Curve
Figure 6 - Maximum Non-Repetitive Forward
Surge Current Uni-Directional Only
RATING AND CHARACTERISTIC CURVES (TA: 25°C UNLESS OTHERWISE SPECIFIED)
Transient Voltage Suppressors
0KPA Series
MERITEK
4
Rev 7
