SHANGHAI SUNRISE ELECTRONICS CO., LTD. 1N5400G THRU 1N5408G GLASS PASSIVATED JUNCTION RECTIFIER TECHNICAL SPECIFICATION VOLTAGE: 50 TO 1000V CURRENT: 3.0A FEATURES DO - 201AD * Molded case feature for auto insertion * Glass passivated chip * High current capability * Low leakage current * High surge capability * High temperature soldering guaranteed: 250oC/10sec/0.375"(9.5mm) lead length at 5 lbs tension MECHANICAL DATA * Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C * Case: Molded with UL-94 Class V-O recognized flame retardant epoxy * Polarity: Color band denotes cathode * Mounting position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS SYMBOL Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current VRRM VRMS VDC (9.5mm lead length, at TL=105oC) Peak Forward Surge Current (8.3ms single half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage (at rated forward current) Maximum DC Reverse Current Ta=25oC (at rated DC blocking voltage) o 1N54 1N54 1N54 1N54 1N54 1N54 1N54 UNITS 00G 01G 02G 04G 06G 07G 08G 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V 50 100 200 400 600 800 1000 V IF(AV) 3.0 A IFSM 200 A VF 1.0 V 5.0 A 300 A IR Ta=100 C 40 CJ Typical Junction Capacitance (Note 1) 30 Typical Thermal Resistance (Note 2) R(ja) -65 to +150 Storage and Operation Junction Temperature TSTG,TJ Note: 1.Measured at 1.0 MHz and applied voltage of 4.0Vdc 2.Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C. board mounted pF o C/W o C http://www.sse-diode.com