477LBA450M2EH a SNAP-IN/ SNAP MOUNT Parts are RoHS compliant Date code when parts became RoHS: 14 ELECTRICAL SPECIFICATIONS Capacitance: 470 uF Tolerance: -20 %, +20 % Dissipation Factor: 0.2 Max at 120 Hz and 20C WVODC: 450 Volts DC Temperature Range: -25C to +85C SVDC: 500 Volts DC Impedance: N/A Ripple Current: 2.5 A at 120 Hz and 85C Impedance Ratios:-25C/20C 6 and 40C/20C - 12 Leakage Current: .02CV or 2000UA, whichever is less 1379.67 uA after 5 Minutes Load Life: 2000 hours at 65C with 100 % of rated voltage and with 100 % of rated ripple current Capacitance Change: =20% of initial measured value Dissipation Factor: =200% of maximum specified value Leakage Current: 100% of maximum specified value Frequency Multipliers: Temperature Multipliers: 50 HZ 120 HZ 400 HZ 1KHZ 10 KHZ 100 KHZ 45C 60C 70C 65C 75C 85C 105C 125C 0.8 q 7 13 1.41 143 1B [76 [4 [ta 4 1 Oo Oo PHYSICAL DIMENSIONS Diameter (D): 35 mm + 1 mm Lead Wire Diameter (d): 1.5 mm +/- 0.5 mm Length (L): 50 mm + 2 mm Lead Length: 6.3 mm +/- 1mm Lead Spacing (5): 10 mm +/- 0.1 mm Lead Finish: Matte Tin Coating: BlackPET sleeving P.C. Mounting fl 2 age . a Specifications 10.0 +01 { Ne Gase Vent, L: Insulator Sleeve 3757 W. Touhy Ave. Lincolnwood, IL 60712 (847) 675-1760 FAX (847) 673-2850 a 1 Illincis Capacitor (HK) Ltd, Tel: 85227930931, Fax: 85227930731, www illcap com hk ILLINOIS CAPACITOR Copyright 2019 Illinois Capacitor. An affiliate of Cornell Dubilier, All Rights Reserved