Industrial Microphotonics Company 100W QCW Laser Diode Array Submodule Part Number: ASM01P100 SILVER BULLET TM * Packaged Laser Diode Array * Easily Soldered to a Heat Exchanger * Available Wavelengths (785-1064nm) OPTICAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS PARAMETER CONDITIONS QCW Peak Power Output 120A, 150 sec, 1kHz (1) Operating Current Threshold Current Slope Efficiency Efficiency Number of Emitters Emitter Size Emitter Pitch Center Wavelength Wavelength Tolerance Spectral Width Wavelength Shift Beam Divergence FWHM (1) Polarization Degradation Rate (2) 100W at 25 C Heat 25 C Heat Sink 25 C Heat Sink 100W at 25 C Heat ------100W at 25 C Heat 100W at 25 C Heat 100W at 25 C Heat ------25 C Heat Sink PARAMETER Built-in Voltage Series Resistance Operating Voltage CONDITIONS 25C Heat Sink 25C Heat Sink 25C Heat Sink, 100W Sink Sink Sink Sink Sink MIN TYP MAX UNITS 100 --- --- W ----0.95 40 ------792 1 ----------- 110 15 1.05 45 60 150 x 1 166 808 3 2.0 0.25 40x10 TM 5 120 20 ----------812 4 2.5 0.27 42x12 ----- A A W/A % %/G shots MIN ------- TYP 1.6 0.006 2.2 MAX 1.7 0.010 2.7 UNITS V ohms V m m nm nm nm nm/ C x --- U.S. Patent Numbers: 5,734,672 5,913,108 NOTES (1) Lower beam divergence is also available. (2) Typical degradation rates are 5% in the first 10 million shots and 5% per billion shots thereafter. Industrial Microphotonics Company * 20 Point West Blvd. * St. Charles, MO 63301 636.916.5656 * 636.916.5665 fax * www.imclaser.com ABSOLUTE MAXIMUM RATINGS MECHANICAL CHARACTERISTICS PARAMETER Forward Current Reverse Current Reverse Voltage Operating Temperature Range (3) Storage Temperature Range CONDITIONS 70A 25A 3V -20C to 50C -40C to 85C PARAMETER Package Length Package Width Package Height Package Weight Package Thermal Resistance DIMENSIONS 0.250 0.001 inches 0.394 0.001 inches 0.065 0.003 inches 0.6g 0.4C/W .065 [1,65] .394 [10,01] DIODE BAR .250 [6,35] ENDBLOCK .08 [2,032] SOLDER PADS FOR ELECTRICAL LEADS .15 [3,81] .12 [3] METALIZED BeO .025 [0,64] NOTES (3) A dry nitrogen environment should be provided by the user when storing and operating at temperatures below ambient dew point. INVISIBLE LASER RADIATION AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. Diode laser Copyright (c) 2000 Industrial Microphotonics Company. All Rights Reserved. Industrial Microphotonics Company reserves the right to change product design and specification at any time without notice. 5W 635-1000nm CLASS IV No license is granted by implication or otherwise under any patents or patent rights of Industrial Microphotonics Company, or others. No responsibility is assumed for the use of these products, nor for any infringement on the rights of others resulting from the use of these products. Germany, Austria, Switzerland Polytec GmbH Mustafa Dinc Telephone: 49.7243.604.0 Fax: 49.7243.69944 Email: m.dinc@polytec.de Web: www.polytecpi.com DISTRIBUTORS Australia Photon Engineering Adam Weigold, Managing Director Telephone: 61.8.8410.4599 Fax: 61.8.8410.4544 Email: photeng@ozemail.com.au Web:www.photon.on.net France Optilas Jean-Claude Sanudo Telephone: 33.01.60.79.59.85 Fax: 33.01.60.86.96.33 Email: Jean-Claude_Sanudo@fr.optilas.com Web: www.optilas.com Israel R.M. Photonics PO Box 1507 Ramat Modiim D.N. Modiim 73127 Israel Meir Chazon Telephone: 011.972.8.926.5733 Fax: 011.972.8.926.2021 E-mail: rmphoton@inter.net.il Laser diode product components are intended for use in a userdevised end system. However, these products are capable of emitting Class IV radiation. Extreme care must be exercised during their operation. Only persons familiar with the appropriate safety precautions should operate a laser product. Directly viewing the laser beam or exposure to specular reflections must be avoided. Serious injury may result if any part of the body is exposed to the beam. The eye is extremely sensitive to the infrared radiation and therefore, proper eyewear must be worn at all times. Use of optical instruments with these products may increase eye hazard. Always wear proper eye protection when operating. Japan Opto Science, Inc. Shinjiro Kato Telephone: 03.3356.1064 Fax: 03.3356.3466 Email: info@optoscience.com United Kingdom Laser 2000 (UK) LTD Guy Holmes Telephone: 44.1933.461666 Fax: 44.1933.461699 Email: sales@laser2000.co.uk Web: www.laser2000.co.uk Matsuo Sangyo Co.; Ltd. K. Nakaki Telephone: 06.252.6381 Fax: 06.245.3923 telex: 5225235 Matsuo J Tsukasa-Tec Inc. Tadao Shoji Telephone: 81.298.53.7611 Fax: 81.298.53.7622 REV D-04/01 Industrial Microphotonics Company * 20 Point West Blvd. * St. Charles, MO 63301 636.916.5656 * 636.916.5665 fax * www.imclaser.com