SILVER BULLETTM
OPTICAL
PARAMETER CONDITIONS MIN TYP MAX UNITS
CHARACTERISTICS
QCW Peak Power Output 120A, 150 µsec, 1kHz (1) 100 --- --- W
Operating Current at 25˚C Heat Sink
100W --- 110 120 A
Threshold Current 25˚C Heat Sink --- 15 20 A
Slope Efficiency 25˚C Heat Sink 0.95 1.05 --- W/A
Efficiency 100W at 25˚C Heat Sink 40 45 --- %
Number of Emitters --- --- 60 ---
Emitter Size --- --- 150 x 1 --- µm
Emitter Pitch --- --- 166 --- µm
Center Wavelength 100W at 25˚C Heat Sink 792 808 812 nm
Wavelength Tolerance 100W at 25˚C Heat Sink ± 1 ± 3 ± 4 nm
Spectral Width 100W at 25˚C Heat Sink --- 2.0 2.5 nm
Wavelength Shift --- --- 0.25 0.27 nm/˚C
Beam Divergence FWHM --- --- 40x10 42x12 ˚ x ˚
Polarization --- --- TM --- ---
Degradation Rate (2) 25˚C Heat Sink --- 5 --- %/G shots
ELECTRICAL
PARAMETER CONDITIONS MIN TYP MAX UNITS
CHARACTERISTICS
Built-in Voltage 25˚C Heat Sink --- 1.6 1.7 V
Series Resistance 25 ˚C Heat Sink --- 0.006 0.010 ohms
Operating Voltage 25˚C Heat Sink, 100W --- 2.2 2.7 V
NOTES
(1) Lower beam divergence is also available.
100W QCW Laser Diode Array Submodule
Part Number: ASM01P100
Industrial Microphotonics Company ·20 Point West Blvd. ·St. Charles, MO 63301
636.916.5656 · 636.916.5665 fax · www.imclaser.com
(1)
(2)
· Packaged Laser Diode Array
· Easily Soldered to a
Heat Exchanger
· Available Wavelengths
(785-1064nm)
Industrial Microphotonics Company
Typical degradation rates are 5% in the first 10 million shots and 5% per billion shots thereafter.
U.S. Patent Numbers: 5,734,672 5,913,108
ABSOLUTE MAXIMUM
PARAMETER CONDITIONS
RATINGS
Forward Current 70A
Reverse Current 25µA
Reverse Voltage 3V
Operating Temperature Range (3) -20˚C to 50˚C
Storage Temperature Range -40˚C to 85˚C
MECHANICAL
PARAMETER DIMENSIONS
CHARACTERISTICS
Package Length 0.250 ± 0.001 inches
Package Width 0.394 ± 0.001 inches
Package Height 0.065 ± 0.003 inches
Package Weight 0.6g
Package Thermal Resistance 0.4˚C/W
NOTES
(3) A dry nitrogen environment should be provided by the user when storing and operating at tempera -
tures below ambient dew point.
Industrial Microphotonics Company ·20 Point West Blvd. ·St. Charles, MO 63301
636.916.5656 · 636.916.5665 fax · www.imclaser.com
Copyright © 2000 Industrial Microphotonics Company.
All Rights Reserved.
Industrial Microphotonics Company reserves the right to change product
design and specification at any time without notice.
No license is granted by implication or otherwise under any patents or
patent rights of Industrial Microphotonics Company, or others.
No responsibility is assumed for the use of these products, nor for any in-
fringement on the rights of others resulting from the use of these products.
Laser diode product components are intended for use in a user-
devised end system.However, these products are capable of emitting
Class IV radiation. Extreme care must be exercised during their oper-
ation. Only persons familiar with the appropriate safety precautions
should operate a laser product. Directly viewing the laser beam or
exposure to specular reflections must be avoided. Ser ious injur y may
result if any part of the body is exposed to the beam. The eye is
extremely sensitive to the infrared radiation and therefore , proper e ye-
wear must be worn at all times. Use of optical instr uments with these
products may increase e ye hazard.Alwa ys wear proper e ye protection
when operating.
Diode laser
CLASS IV
5W 635-1000nm
AVOID EYE OR SKIN EXPOSURE TO DIRECT
OR SCATTERED RADIATION.
INVISIBLE LASER
RADIATION
.394 [10,01]
.250 [6,35]
.15
[3,81] .12
[3]
.025 [0,64]
SOLDER PADS
FOR ELECTRICAL
LEADS METALIZED BeO
ENDBLOCK
DIODE BAR
.065
[1,65]
.08 [2,032]
REV D-04/01
DISTRIBUTORS
Australia
Photon Engineering
Adam Weigold, Managing Director
Telephone: 61.8.8410.4599
Fax: 61.8.8410.4544
Email: photeng@ozemail.com.au
Web:www.photon.on.net
France
Optilas
Jean-Claude Sanudo
Telephone: 33.01.60.79.59.85
Fax: 33.01.60.86.96.33
Email: Jean-Claude_Sanudo@fr.optilas.com
Web: www.optilas.com
Germany, Austria, Switzerland
Polytec GmbH
Mustafa Dinc
Telephone: 49.7243.604.0
Fax: 49.7243.69944
Email: m.dinc@polytec.de
Web: www.polytecpi.com
Israel
R.M. Photonics
PO Box 1507
Ramat Modiim
D.N. Modiim 73127
Israel
Meir Chazon
Telephone: 011.972.8.926.5733
Fax: 011.972.8.926.2021
E-mail: rmphoton@inter.net.il
United Kingdom
Laser 2000 (UK) LTD
Guy Holmes
Telephone: 44.1933.461666
Fax: 44.1933.461699
Email: sales@laser2000.co.uk
Web: www.laser2000.co.uk
Japan
Opto Science, Inc.
Shinjiro Kato
Telephone: 03.3356.1064
Fax: 03.3356.3466
Email: info@optoscience.com
Matsuo Sangyo Co.; Ltd.
K. Nakaki
Telephone: 06.252.6381
Fax: 06.245.3923
telex: 5225235 Matsuo J
Tsukasa-Tec Inc.
Tadao Shoji
Telephone: 81.298.53.7611
Fax: 81.298.53.7622
