SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
P
APEM
, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
FEATURES
High reliability.
Self-cleaning contacts.
Multi- positions.
Process compatible with tape seal.
Dual in-line .100" x .300" term. spacing.
GENERAL SPECIFICATIONS
ELECTRICALS
Electrical life 2000 cycles min. per switch @ 24 VDC, 25 mA
Contact rating, non-switching 100 mA at 50 VDC
Contact rating, switching 25 mA at 24 VDC
Contact resistance at current 100 mA
5
0 milliohms max. initial - 100 milliohms max. after life test
Insulation resistance at 500 VDC 100 Megohms minimum
Dielectric strength 500 VAC for 1 minute
Capacitance 5 pf. max. between adjacent terminals
MECHANICALS, THERMALS
Mechanical life 2000 cycles min. per switch
Operating force 1000 grams max.
Vibration 10-55 Hz.per MIL-STD-202F METHOD 201A
Shock 50 G (peak value) for 11 msec. per MIL-STD-202F, METHOD 213B
Operating temperature range -20°C to 85°C
SOLDERING & CLEANING RECOMMENDATIONS*
Hand soldering 350°C max. for 2 seconds max.(30 watt iron max.)
Wave soldering 260°C max. for 5 seconds max.
Cleaning (with tape seal) Spray wash from top side only.
* Note: keep switches in “OFF” position during soldering and cleaning for best results
MATERIALS
Base & Cover NDI: UL94V-O, glass fiber filled PBT, black
DM: UL94V-O, glass fiber filled PPS, black
Actuators UL94V-O, Nylon, white
Contacts Gold over nickel plated copper alloy
Terminals Gold plated brass.
Term. Sealing Molded-in
Tape seal Kapton
PACKAGING
DIP switches are shipped in standard IC tubes with all actuators in the "OFF" position.
Tape & reel packaging per EIA available for DMR models (see next page).
SWITCH SCHEMATIC (TYPICAL)
CROSS
SECTIONS
Double
contact system
See tabulations on following pages for
DI & DM number of positions available (10 shown)
NDI & DM SERIES
SPST STANDARD DIP SWITCHES
P2
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
P
APEM
, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
Squared terminals Spread terminals
MODEL MODEL MODEL MODEL
NO. NO. NO. NO. No. 'A' Dim.
with no with with no with of +.008/-.000"
tape seal tape seal tape seal tape seal Pos. (+0.2/-0.0mm)
NDI01H n/a NDI01S n/a 1 .137 (3,48)
NDI02H n/a NDI02S n/a 2 .237 (6,02)
NDI04H n/a NDI04S n/a 4 .437 (11.10)
NDI06H n/a NDI06S n/a 6 .637 (16,18)
NDI08H n/a NDI08S n/a 8 .837 (21,26)
NDI10H n/a NDI10S n/a 10 1.037 (26,34)
NDIR01H n/a NDIR01S n/a 1 .137 (3,48)
NDIR02H NDIR02HT NDIR02S NDIR02ST 2 .237 (6,02)
NDIR04H NDIR04HT NDIR04S NDIR04ST 4 .437 (11,10)
NDIR06H NDIR06HT NDIR06S NDIR06ST 6 .637 (16,18)
NDIR08H NDIR08HT NDIR08S NDIR08ST 8 .837 (21,26)
NDIR10H NDIR10HT NDIR10S NDIR10ST 10 1.037 (26,34)
Recessed Raised Actuator
NDI Series
Machine
Insertable ++
++
+
n/a = not available.
+ Auto-insertable using equipment from Amistar, Dynapert,
Panasert, Northeastern Tool, Universal and others.
P3
DM Series
Surface
Mount ++
++
+
MODEL MODEL
NO. NO. 'A' Dimension
Actuator with no with No. of +.008/-.000"
Style tape seal tape seal Pos. (+0.2/-0.0mm)
Raised DM01 n/a 1 .137 (3,48)
Actuator DM02 n/a 2 .237 (6,02)
DM03 n/a 3 .337 (8,56)
DM04 n/a 4 .437 (11,10)
DM05 n/a 5 .537 (13,64)
DM06 n/a 6 .637 (16,18)
DM07 n/a 7 .737 (18,72)
DM08 n/a 8 .837 (21,26)
DM09 n/a 9 .937 (23,80)
DM10 n/a 10 1.037 (26,34)
DM12 n/a 12 1.237 (31.42)
Recessed DMR01 n/a 1 .137 (3,48)
Actuator DMR02 DMR02T 2 .237 (6,02)
DMR03 DMR03T 3 .337 (8,56)
DMR04 DMR04T 4 .437 (11,10)
DMR05 DMR05T 5 .537 (13,64)
DMR06 DMR06T 6 .637 (16,18)
DMR07 DMR07T 7 .737 (18,72)
DMR08 DMR08T 8 .837 (21,26)
DMR09 DMR09T 9 .937 (23,80)
DMR10 DMR10T 10 1.037 (26,34)
DMR12 DMR12T 12 1.237 (31.42)
For tape & reel packaging on DMR models only, add 'TR'
to model number - example: DMR08TTR. Note- tape &
reel packaging is available only with tape seal models.
900 switches per reel.