TFPT www.vishay.com Vishay SMD PTC - Nickel Thin Film Linear Thermistors FEATURES * Alumina substrate base with nickel based PTC thin film element * 0603, 0805, and 1206 sizes available * Available in tape and reel packaging * Standard R25 tolerances: 0.5 %, 1 %, 5 % * Operation range -55 C to +150 C * High stability over the entire temperature range * cUL recognized component: File E148885 * AEC-Q200 qualified (grade 1) * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA PARAMETER VALUE DESCRIPTION TFPT0603 Resistance value at 25 C (2) 100 to 1K Tolerance on R25-value (2) TFPT0805 TFPT1206 100 to 5K 100 to 10K UNIT 0.5; 1; 5 TCR at 25 C 4110 Tolerance on TCR at 25 C (1) 400 % ppm/K Operating temperature range: at rated power -55 to +70 at zero dissipation (4) -55 to +150 C Dissipation factor (for information only) 1.8 2.3 4 mW/K Maximum rated power at 70 C (P70) 75 100 125 mW Maximum working voltage RCWV (3) 30 40 50 V 10 mg Climatic category (LCT/UCT/days) 55/150/56 Weight 2 - 5.5 Notes (1) Contact Vishay if closer TCR lot tolerance is desired. (2) Other R -values and tolerances are available upon request. 25 (3) Rated continuous working voltage is maximum working voltage or P 70 x R whichever is less. (4) Zero power or zero dissipation is considered as measuring power max. 1 % of rated power P . 70 STANDARD RESISTANCE VALUES at 25 C in 100 180 330 560 1.0K 1.8K 3.3K 5.0K 8.2K 120 220 390 680 1.2K 2.2K 3.9K 5.6K 10.0K 150 270 470 820 1.5K 2.7K 4.7K 6.8K Note * Rated continuous working voltage is maximum working voltage or P 70 x R whichever is less. GLOBAL PART NUMBER INFORMATION Global Part Numbering: TFPT1206L1002FM (preferred part number format) T F P T 1 2 0 6 L 1 0 0 2 F M GLOBAL MODEL CHARACTERISTIC RESISTANCE VALUE TOLERANCE CODE PACKAGING TFPT0603 TFPT0805 TFPT1206 L = Linear 1002 = 10K D = 0.5 % F=1% J=5% M = Lead (Pb)-free, T/R (5000 pieces) V = Lead (Pb)-free, T/R (1000 pieces) Z = Tin/lead, T/R (5000 pieces) Y = Tin/lead, T/R (1000 pieces) Revision: 30-Aug-16 Document Number: 33017 1 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TFPT www.vishay.com Vishay DIMENSIONS in millimeters CONSTRUCTION A Overcoating D Thermistor C B E Alumina substrate PART NUMBER A B C D E TFPT 0603 1.55 0.10 0.80 0.10 0.45 0.10 0.30 0.20 0.30 0.20 TFPT 0805 2.00 0.15 1.25 0.15 0.45 0.10 0.40 0.20 0.40 0.20 TFPT 1206 3.05 0.15 1.50 0.15 0.55 0.10 0.50 0.25 0.50 0.25 Inner electrode Nickel barrier Solderable coating Power in % of P70 Power Derating 110 100 90 80 70 60 50 40 30 20 10 0 - 75 - 50 - 25 0 25 50 75 100 125 150 175 Temperature in C Note * Zero power is considered as measuring power max. 1 % of rated power P70. TESTS AND REQUIREMENTS TEST CONDITIONS (1) REQUIREMENTS MAX |R25/R25| High temperature exposure (storage) AEC-Q200, 1000 h at 150 C Temperature cycling AEC-Q200, 1000 cycles -55 C / +125 C 0.25 % 1000 h, 1 mA biased at 85 C / 85 % RH 0.25 % 1000 h, 1 mA biased at 40 C / 95 % RH 0.25 % 1000 h, P70 max biased at 85 C 0.25 % Mechanical shock and vibration MIL-STD 202, method 213 - 204 0.50 % Resistance to soldering heat MIL-STD 202, method 210, solderbath dipping 10 s at 260C 0.25 % ESD (2) AEC-Q200-002, HBM (CD) 0.5 kV (0603), 1.0 kV (0805), 1.0 kV (1206) 0.25 % Board flex AEC-Q200-005, 2 mm during 60 s 0.25 % Terminal strength AEC-Q200-006, shear test 17.7 N during 60 s 0.25 % Biased humidity Operational life 0.25 % Notes (1) Environmental performance specifications use test procedures as outlined in MIL-R23648D, MIL-STD 202 and AEC-Q200. (2) TFPTs are ESD sensitive. Revision: 30-Aug-16 Document Number: 33017 2 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TFPT www.vishay.com Vishay AVERAGE RATIO R/R25 TFPT ALL SIZES AND VALUES TEMP. R/R25 TEMP. R/R25 TEMP. R/R25 TEMP. R/R25 TEMP. R/R25 TEMP. R/R25 0.702 0.705 0.708 0.712 0.715 0.719 0.722 0.725 0.729 0.732 0.736 0.739 0.743 0.746 0.749 0.753 0.756 0.760 0.763 0.767 0.771 0.774 0.778 0.781 0.785 0.788 0.792 0.796 0.799 0.803 0.806 0.810 0.814 0.817 0.821 -20 -19 -18 -17 -16 -15 -14 -13 -12 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 0.825 0.828 0.832 0.836 0.839 0.843 0.847 0.851 0.854 0.858 0.862 0.866 0.869 0.873 0.877 0.881 0.885 0.889 0.892 0.896 0.900 0.904 0.908 0.912 0.916 0.920 0.924 0.927 0.931 0.935 0.939 0.943 0.947 0.951 0.955 0.959 0.963 0.967 0.971 0.975 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 0.980 0.984 0.988 0.992 0.996 1.000 1.004 1.008 1.012 1.017 1.021 1.025 1.029 1.033 1.037 1.042 1.046 1.050 1.054 1.059 1.063 1.067 1.071 1.076 1.080 1.084 1.089 1.093 1.097 1.102 1.106 1.110 1.115 1.119 1.124 1.128 1.133 1.137 1.141 1.146 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 1.150 1.155 1.159 1.164 1.168 1.173 1.177 1.182 1.186 1.191 1.196 1.200 1.205 1.209 1.214 1.219 1.223 1.228 1.232 1.237 1.242 1.246 1.251 1.256 1.261 1.265 1.270 1.275 1.280 1.284 1.289 1.294 1.299 1.303 1.308 1.313 1.318 1.323 1.328 1.333 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 1.337 1.342 1.347 1.352 1.357 1.362 1.367 1.372 1.377 1.382 1.387 1.392 1.397 1.402 1.407 1.412 1.417 1.422 1.427 1.432 1.437 1.442 1.448 1.453 1.458 1.463 1.468 1.473 1.478 1.484 1.489 1.494 1.499 1.505 1.510 1.515 1.520 1.526 1.531 1.536 140 141 142 143 144 145 146 147 148 149 150 1.541 1.547 1.552 1.557 1.563 1.568 1.574 1.579 1.584 1.590 1.595 -55 -54 -53 -52 -51 -50 -49 -48 -47 -46 -45 -44 -43 -42 -41 -40 -39 -38 -37 -36 -35 -34 -33 -32 -31 -30 -29 -28 -27 -26 -25 -24 -23 -22 -21 RATIO FORMULA RT = R25 x (9.0014 x 10-1 + 3.87235 x 10-3 (C)-1 x T + 4.86825 x 10-6 (C)-2 x T2 + 1.37559 x 10-9 (C)-3 x T3) T(C) = 28.54 x (RT/R25)3 - 158.5 x (RT/R25)2 + 474.8 x (RT/R25) - 319.85) RATIO TOLERANCE EXAMPLES: RATIO TOLERANCES LOW TEMP. HIGH TEMP. TOL. -55 C +150 C 4% -40 C +125 C 3% -20 C +85 C 2% 0 C +55 C 1% +12 C +40 C 0.5 % Revision: 30-Aug-16 At 40 C, ratio = 1.063 0.5 % (0.005) so, ratio = 1.058 to 1.068 At 125 C, ratio = 1.460 3 % (0.044) so, ratio = 1.416 to 1.504 Document Number: 33017 3 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TFPT www.vishay.com Vishay Ratio RT/R25 1.7 1.6 1.5 Max. 1.4 1.3 Ratio Min. 1.2 1.1 1.0 Min. 0.9 Max. 0.8 0.7 0.6 - 75 - 50 - 25 0 25 50 75 100 125 150 Temperature in C TCR Typical Value 4800 4700 4600 TCR in ppm/K 4500 4400 4300 4200 4100 4000 3900 3800 3700 3600 - 75 - 50 - 25 0 25 50 75 100 125 150 175 Temperature in C Revision: 30-Aug-16 Document Number: 33017 4 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: TFPT0603L1001FP TFPT1206L4700FP TFPT1206L1002FY TFPT0805L3901FY TFPT0805L8200FP TFPT1206L5000FP TFPT0603L1001FV TFPT0805L3901FV TFPT0603L1002JV TFPT0603L1000FV TFPT1206L4700FV TFPT0603L1501FV TFPT0805L8200FV TFPT1206L5000FV TFPT1206L1002JV TFPT1206L1002FV TFPT0805L1001JV TFPT0805L1001FV TFPT0805L1501FV TFPT1206L5601FV TFPT0805L1001FY TFPT0805L1001JP TFPT0603L1000FP TFPT0805L1501FY TFPT1206L5601FY TFPT1206L1002JP TFPT0805L3901FM TFPT0805L2201FM TFPT0805L4701FM TFPT0603 560 1% TFPT1206 100 1% TFPT1206 10K 1%TR TFPT1206 220 1% TFPT0805L5001FV TFPT0603L1001DV TFPT0603L1001JV TFPT0603L2200FV TFPT0603L8200FV TFPT0805L1000JV TFPT0805L1801FV TFPT0805L5001JV TFPT1206L6801FV TFPT0603L1200FV TFPT0603L1500FM TFPT0603L2200FM TFPT0603L4700FM TFPT0805L1000FV TFPT0805L1001FM TFPT0805L3301FM TFPT0805L4700FM TFPT0805L6800FM TFPT1206L1001FM TFPT1206L1002FM TFPT1206L2200FM TFPT1206L4700FM TFPT1206L4701FM TFPT1206L6801FM TFPT0805L1801FM TFPT0603L1000JM TFPT0603L3900JM TFPT0603L6800KV TFPT0805L1201FM TFPT0805L1801JM TFPT0805L2201JM TFPT0805L2701FM TFPT0805L3301JM TFPT0805L3901JM TFPT0805L4701JM TFPT0805L6800JM TFPT1206L1002JM TFPT1206L2201JM TFPT1206L3901JM TFPT1206L5601JM TFPT0805L1001JM TFPT0805L1501FM TFPT0603L3300FM TFPT0603L1001FM TFPT0603L8200FY TFPT1206L1000FZ TFPT0603L5600FZ TFPT1206L2200FZ TFPT0603L1500FV TFPT0603L3300FV TFPT0805L2201FV TFPT0805L3301FV TFPT0805L4701FV TFPT1206L2200FV TFPT0805L1200FV TFPT1206L1001FV TFPT1206L6800FV TFPT0603L3900FV TFPT0805L1800FV TFPT1206L3900FV