S1FLB, S1FLD, S1FLG, S1FLJ, S1FLK, S1FLM
www.vishay.com Vishay Semiconductors
Rev.1.0, 26-Aug-13 1Document Number: 81820
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Standard Recovery Rectifier, High Voltage Surface Mount
MECHANICAL DATA
Case: DO-219AB (SMF)
Polarity: band denotes cathode end
Weight: approx. 15 mg
Packaging codes/options:
GS18/10K per 13" reel (8 mm tape), 50K/box
GS08/3K per 7" reel (8 mm tape), 30K/box
Int. construction: Single
FEATURES
• For surface mounted applications
• Low profile package
• Ideal for automated placement
• Glass passivated
• High temperature soldering: 260 °C/10 s at
terminals
• Wave and reflow solderable
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
(1) Averaged over any 20 ms periode
17249
PARTS TABLE
PART ORDERING CODE MARKING REMARKS
S1FLB S1FLB-GS18 or S1FLB-GS08 FB Tape and reel
S1FLD S1FLD-GS18 or S1FLD-GS08 FD Tape and reel
S1FLG S1FLG-GS18 or S1FLG-GS08 FG Tape and reel
S1FLJ S1FLJ-GS18 or S1FLJ-GS08 FJ Tape and reel
S1FLK S1FLK-GS18 or S1FLK-GS08 FK Tape and reel
S1FLM S1FLM-GS18 or S1FLM-GS08 FM Tape and reel
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT
Maximum repetitive peak reverse voltage
S1FLB VRRM 100 V
S1FLD VRRM 200 V
S1FLG VRRM 400 V
S1FLJ VRRM 600 V
S1FLK VRRM 800 V
S1FLM VRRM 1000 V
Maximum RMS voltage
S1FLB VRMS 70 V
S1FLD VRMS 140 V
S1FLG VRMS 280 V
S1FLJ VRMS 420 V
S1FLK VRMS 560 V
S1FLM VRMS 700 V
Maximum DC blocking voltage
S1FLB VDC 100 V
S1FLD VDC 200 V
S1FLG VDC 400 V
S1FLJ VDC 600 V
S1FLK VDC 800 V
S1FLM VDC 1000 V
Maximum average forward rectified current Ttp = 75 °C IF(AV) 1.5 A
TA = 65 °C (1) IF(AV) 0.7 A
Peak forward surge current 8.3 ms single half sine-wave TL = 25 °C IFSM 22 A
S1FLB, S1FLD, S1FLG, S1FLJ, S1FLK, S1FLM
www.vishay.com Vishay Semiconductors
Rev.1.0, 26-Aug-13 2Document Number: 81820
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) Mounted on epoxy substrate with 3 mm x 3 mm Cu pads ( 40 μm thick)
Note
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Thermal resistance junction to
ambient air (1) RthJA 180 K/W
Operating junction and storage
temperature range Tj, Tstg - 55 to + 150 °C
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Maximum instaneous forward voltage 1 A (1)
S1FLB VF1.1 V
S1FLD VF1.1 V
S1FLG VF1.1 V
S1FLJ VF1.1 V
S1FLK VF1.1 V
S1FLM VF1.1 V
Maximum DC reverse current at rated
DC blocking voltage
TA = 25 °C
S1FLB IR10 μA
S1FLD IR10 μA
S1FLG IR10 μA
S1FLJ IR10 μA
S1FLK IR10 μA
S1FLM IR10 μA
TA = 125 °C
S1FLB IR50 μA
S1FLD IR50 μA
S1FLG IR50 μA
S1FLJ IR50 μA
S1FLK IR50 μA
S1FLM IR50 μA
Reverse recovery time IF = 0.5 A, IR = 1 A, Irr = 0.25 A
S1FLB trr 1.8 μs
S1FLD trr 1.8 μs
S1FLG trr 1.8 μs
S1FLJ trr 1.8 μs
S1FLK trr 1.8 μs
S1FLM trr 1.8 μs
Typical capacitance 4 V, 1 MHz
S1FLB Cj4pF
S1FLD Cj4pF
S1FLG Cj4pF
S1FLJ Cj4pF
S1FLK Cj4pF
S1FLM Cj4pF
S1FLB, S1FLD, S1FLG, S1FLJ, S1FLK, S1FLM
www.vishay.com Vishay Semiconductors
Rev.1.0, 26-Aug-13 3Document Number: 81820
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 1 - Forward Current Derating Curve
Fig. 2 - Typical Instantaneous Forward Characteristics
Fig. 3 - Typical Instantaneous Reverse Characteristics
Fig. 4 - Capacitance vs. Reverse Voltage
0
0.6
0.8
1.2
1.0
0 20 40 60 80 100 120 140 160
Average Forward Current (A)
Ambient Temperature (°C)
0.4
0.2
Resistive or inductive load
3.0 mm x 3.0 mm 40 µm
thick copper pad areas
17375
100
1000
600 700 800 900 1000 1100
InstantaneousForward Current (mA)
InstantaneousForward Voltage (mV)
T
J
= 150 °C T
J
=25 °C
T
J
= 100 °C
17376
InstantaneousReverse Current (µA)
InstantaneousReverse Voltage (V)
0 100 200 300 400 500 600 700 800 900
0.01
0.1
10
1
100
TJ= 150 °C
TJ= 125 °C
TJ= 100 °C
TJ= 75 °C
TJ= 50 °C
TJ= 25 °C
17377
V
R
(V)
C(pF)
0 5 10 15 20 25 30 35 40
10
9
8
7
6
5
4
3
2
1
0
17378
S1FLB, S1FLD, S1FLG, S1FLJ, S1FLK, S1FLM
www.vishay.com Vishay Semiconductors
Rev.1.0, 26-Aug-13 4Document Number: 81820
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS in millimeters (inches): DO-219AB (SMF)
Foot print recommendation:
Rev. 3 - Date: 13. March 2007
Document no.:S8-V-3915.01-001 (4)
1.3 (0.051) 1.3 (0.051)
2.9 (0.114)
1.4 (0.055)
2.9 (0.114)
2.7 (0.106)
3.9 (0.154)
3.5 (0.138)
0.85 (0.033)
0.35 (0.014)
1.2 (0.047)
0.8 (0.031)
1.9 (0.075)
1.7 (0.067)
1.08 (0.043)
0.88 (0.035)
0.25 (0.010)
0.05 (0.002)
0.1 (0.004)
0 (0.000)
5
5
Created - Date: 15. February 2005
17247
Detail Z
enlarged
S1FLB, S1FLD, S1FLG, S1FLJ, S1FLK, S1FLM
www.vishay.com Vishay Semiconductors
Rev.1.0, 26-Aug-13 5Document Number: 81820
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BLISTERTAPE DIMENSIONS in millimeters: DO-219 AB (SMF)
18513
PS
Document-No.: S8-V-3717.02-001 (3)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
