
• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft
• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
WIRING: PHYSICAL:
ELECTRICAL SPECIFICATIONS:
SAFETY & PERFORMANCE:
Output
Power
Max.
Input
Power
Input
Current
Minimum
PF
(full load)
Max.
THD
(full load)
Output
Voltage
Output
Current
T case
Max.
Minimum
Starting
Temp.
Efciency
Up To
IP
Rating
Dimming
Protocol
Dimming
Range
42W 52W @ 120V
51W @ 277V
0.4A @ 120V
0.175A @ 277V >0.95 <20% 35-60V 700mA±5% 90° C -40° C 82% 64 0 to 10V 10 to
100%
31W 38W @ 120V
37W @ 277V
0.33A @ 120V
0.14A @ 277V >0.95 <20% 35-60V 530mA±5% 90° C -40° C 83% 64 0 to 10V 10 to
100%
24W 30W @ 120V
29W @ 277V
0.25A @ 120V
0.11A @ 277V >0.95 <20% 35-60V 410mA±5% 90° C -40° C 83% 64 0 to 10V 10 to
100%
21W 26W @ 120V
25W @ 277V
0.22A @ 120V
0.09A @ 277V >0.95 <20% 35-60V 350mA±5% 90° C -40° C 83% 64 0 to 10V 10 to
100%
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or work-
manship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a
max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
• UL US Class 2
• cUL LVLE
• UL Outdoor Type 1
• Class A sound rating
• No PCBs
• Warranty: 5 yrs based on max case temp of
<75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation
• FCC Title 47 CFR Part 15
• Surge Protection (3 KV)
• Open/Short Circuit Protection
• LED driver has a life expectancy of
50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of
100,000 hours at Tcase of ≤65°C
Dimensions
Length 9.5" Mounting Length 8.9"
Width 1.7" Weight 1.17 lbs.
Height 1.14" Case Qty. 30 pcs.
Lead Lengths
Black 5.9" Blue 5.9" Purple 5.9"
White 5.9" Red 5.9" Gray 5.9"
©2016
Revised 12/22/2016
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.com
Data is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specications are subject to change without notice. All specications are nominal unless otherwise noted.
Multi-
Current Switching
and Dimming
Constant Current LED Driver
Model Number
AC-42CD700UVQSC
AC-42CD700AQTSC
Input Voltage: 120-277V
Input Frequency: 50/60Hz
Side Mount/Leads
COMPLIANT
E328847
LVLE
E328847
Class 2
Hot Spot
Driver Option:
• 12V Output Tap Wire
(AC-42CD700AQTS)
• 10% dimming, Dim-To-Off and 1%
• 10Kv Surge Protection
Consult Factory for model number
and form factor