B15
Ribbon Cable connector Compliant with MIL Standard
HIF3B Series
■Features
1. Product Compliant with MIL Standard
HIF3B series has been developed as a product compliant with MIL
standard, and used for wide applications.
2. UL Approval Product
HIF3B series connectors are UL approved.
3. Mechanism to Prevent Mis-insertion
This connector is equipped with the mechanism to prevent Mis-
insertion as follows.
1The system provides the convex area to insert the guide-key on the
pin header side, and to guide it in combination with the socket
convex area (MIL standard).
2
The system embeds and guides the polarizing key in the socket holes.
4. Applicable Cable AWG#28
The applicable cable is UL2651 AWG#28 flat cable (7 cores./
0.127mm, jacket dia. 0.9±0.1mm).
■Product Specifications
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Rating Current rating : 1A
Operating Temperature Range
:
–55 to +85ç(Note 1)
Storage Temperature Range : –10 to +60ç(Note 2)
Voltage rating : 200V AC Operating Moisture Range : 40 to 80%Storage Humidity Range : 40 to 70% (Note 2)
Item Specification Condition
1. Insulation Resistance 1000M ohms min. 500V DC
2. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute
3. Contact Resistance 15m ohms max. 0.1A
4.
Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5.
Humidity (Steady state)
Insulation resistance: 1000M ohms min.
96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle No damage, cracks, or parts looseness.
(-65ç: 30 minutes ➝ 15 to 35ç: 5 minutes max.
125ç: 30 minutes ➝15 to 35ç: 5 minutes max.) 5 cycles
7.
Durability (Mating/un-mating)
Contact resistance: 15m ohms max. 500 cycles
8.
Resistance to Soldering heat
No deformation of components affecting performance.
Flow: 260ç for 10 seconds
Manual soldering: 300ç for 3 seconds
■Material
Part Material Finish Remarks
Insulator PBT Black UL94V-0
D Beryllium copper Connection area Gold plated
Socket Contact Connection area Gold plated –––––––
DA Copper alloy Connection area Gold plated
Connection area Tin lead plated
Pin header contact Brass Selective Gold plated –––––––
B16
■Ordering Information
HIF 3B - *D A - 2.54 R
qw ret yu
qSeries Name : HIF
wSeries No. : 3B, 3BA, 3BB (50, 60, 64 contacts only)
e
Number of contacts
: 16, 20, 26, 30, 34, 40, 50, 60, 64
r
Contact alignment
: D : Double
tA : VA type
yContact pitch : 2.54mm
uConnection type
R : ID type
●Socket
HIF 3B - *P A - 2.54 DS
qw ret yu
qSeries Name : HIF
wSeries No. :
3B :
(14 contacts not included)
3BC: (10 contacts only)
3BA, 3BB: (50, 60, 64 contacts only) 3BD: (10 contacts only)
e
Number of contacts
: 16, 20, 26, 30, 34, 40, 50, 60, 64
rP : Pin header
tA : Selective gold plated
yContact pitch : 2.54mm
uContact style
DS : Right angle type
DSA : Straight type
●Pin Header
B17
■Socket (With guide to prevent mis-insertion)
Unit:mm
★
★
★
★
★
★
★
★
★
★
★
★
★
Note1, Note2: The number of polarizing keys and polarizing keyways changes according to products. Refer to the list as shown below.
Note3: The 50, 60 and 64 contact connector contain two types of polarizing guides. Use the products, referring to Notes 1 and 2.
Note4: The 6 contact has no polarizing mark.
The products marked with
★
comply with MIL standard.
Body Protector Clamp
CL No.Part Number
610-0032-3
610-0021-7
610-0022-0
610-0023-2
610-0024-5
610-0025-8
610-0026-0
610-0027-3
610-0028-6
610-0029-9
610-0041-4
610-0030-8
610-0042-7
610-0031-0
610-0043-0
HIF3BA- 6D-2.54R
HIF3BA-10D-2.54R
HIF3BA-14D-2.54R
HIF3BA-16D-2.54R
HIF3BA-20D-2.54R
HIF3BA-26D-2.54R
HIF3BA-30D-2.54R
HIF3BA-34D-2.54R
HIF3BA-40D-2.54R
HIF3BA-50D-2.54R
HIF3BB-50D-2.54R
HIF3BA-60D-2.54R
HIF3BB-60D-2.54R
HIF3BA-64D-2.54R
HIF3BB-64D-2.54R
Number of Contacts
6
10
14
16
20
26
30
34
40
50
50
60
60
64
64
A
12.19
17.27
22.35
24.89
29.97
37.59
42.67
47.75
55.37
68.07
68.07
80.77
80.77
85.85
85.85
CL No.Part Number
–––––––
610-0651-5
610-0652-8
610-0653-0
610-0654-3
610-0655-6
610-0656-9
610-0657-1
610-0658-4
610-0659-7
610-0671-2
610-0660-6
610-0672-5
610-0661-9
610-0673-8
HIF3BA-10DA-2.54R
HIF3BA-14DA-2.54R
HIF3BA-16DA-2.54R
HIF3BA-20DA-2.54R
HIF3BA-26DA-2.54R
HIF3BA-30DA-2.54R
HIF3BA-34DA-2.54R
HIF3BA-40DA-2.54R
HIF3BA-50DA-2.54R
HIF3BB-50DA-2.54R
HIF3BA-60DA-2.54R
HIF3BB-60DA-2.54R
HIF3BA-64DA-2.54R
HIF3BB-64DA-2.54R
B
5.08
10.16
15.24
17.78
22.86
30.48
35.56
40.64
48.26
60.96
60.96
73.66
73.66
78.74
78.74
C
6.35
11.43
16.51
19.05
24.13
31.75
36.83
41.91
49.53
62.23
62.23
74.93
74.93
80.01
80.01
D
7.72
12.8
17.88
20.42
25.5
33.12
38.2
43.28
50.9
63.6
63.6
76.3
76.3
81.38
81.38
Polarizing Guide
(Note 1)
One at center
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
Polarizing Keyway
(Note 2)
None
One on left side
One on right and
left sides, resp.
B18
■Socket with Withdrawal Tab
Part Number CL No.
Unit : mm
HIF3BA-10D-2.54R-CL
HIF3BA-16D-2.54R-CL
HIF3BA-20D-2.54R-CL
HIF3BA-26D-2.54R-CL
HIF3BA-30D-2.54R-CL
HIF3BA-34D-2.54R-CL
HIF3BA-40D-2.54R-CL
HIF3BA-50D-2.54R-CL
HIF3BB-50D-2.54R-CL
HIF3BA-60D-2.54R-CL
HIF3BB-60D-2.54R-CL
HIF3BA-64D-2.54R-CL
HIF3BB-64D-2.54R-CL
610-0190-4
610-0192-0
610-0193-2
610-0194-5
610-0195-8
610-0196-0
610-0197-3
610-0198-6
610-0201-9
610-0199-9
610-0202-1
610-0200-6
610-0203-4
Number of Contacts
10
16
20
26
30
34
40
50
60
64
A B
17.27
24.89
29.97
37.59
42.67
47.75
55.37
68.07
80.77
85.85
5.3
12.9
18.0
25.5
30.5
35.8
43.4
56.0
68.5
73.8
B19
■Socket
Note1: The number of polarizing keys and polarizing keyways changes according to products. For details, refer to the list as shown below.
Note2: The 6 contact has no polarizing mark.
Body Protector Clamp
Unit:mm
★
★
★
★
★
★
★
★
★
★
★
The products marked with
★
comply with MIL standard.
CL No.Part Number
610-0012-6
610-0001-0
610-0002-2
610-0003-5
610-0004-8
610-0005-0
610-0006-3
610-0007-6
610-0008-9
610-0009-1
610-0010-0
610-0011-3
HIF3B- 6D-2.54R
HIF3B-10D-2.54R
HIF3B-14D-2.54R
HIF3B-16D-2.54R
HIF3B-20D-2.54R
HIF3B-26D-2.54R
HIF3B-30D-2.54R
HIF3B-34D-2.54R
HIF3B-40D-2.54R
HIF3B-50D-2.54R
HIF3B-60D-2.54R
HIF3B-64D-2.54R
Number of Contacts
6
10
14
16
20
26
30
34
40
50
60
64
A
12.19
17.27
22.35
24.89
29.97
37.59
42.67
47.75
55.37
68.07
80.77
85.85
B
5.08
10.16
15.24
17.78
22.86
30.48
35.56
40.64
48.26
60.96
73.66
78.74
C
6.35
11.43
16.51
19.05
24.13
31.75
36.83
41.91
49.53
62.23
74.93
80.01
D
7.72
12.80
17.88
20.42
25.50
33.12
38.2
43.28
50.90
63.6
76.3
81.38
Polarizing Guide
(Note 1)
None
One on left side
One on right and
left sides, resp.
B20
■Four Wall Angle Through hole
BPCB mounting pattern
Note 1, Note 2: The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shown below.
Note 3: The spacer moves to the right according to the number of
contacts.
Note 4: The 10, 50, 60 and 64 contact connectors contain two types of
polarizing slots.
Use products, referring to (Note 1) (Note 2).
■n=number of contacts
Unit:mm
★
★
★
★
★
★
★
★
★
★
★
★
★
★
The products marked with
★
comply with MIL standard.
CL No.Part Number
610-0091-2
610-0171-0
610-0092-5
610-0093-8
610-0094-0
610-0095-3
610-0096-6
610-0097-9
610-0098-1
610-0099-4
610-0131-5
610-0100-1
610-0132-8
610-0101-4
610-0133-0
HIF3BA-10PA-2.54DS
HIF3BD-10PA-2.54DS
HIF3BA-14PA-2.54DS
HIF3BA-16PA-2.54DS
HIF3BA-20PA-2.54DS
HIF3BA-26PA-2.54DS
HIF3BA-30PA-2.54DS
HIF3BA-34PA-2.54DS
HIF3BA-40PA-2.54DS
HIF3BA-50PA-2.54DS
HIF3BB-50PA-2.54DS
HIF3BA-60PA-2.54DS
HIF3BB-60PA-2.54DS
HIF3BA-64PA-2.54DS
HIF3BB-64PA-2.54DS
Number of Contacts
10
10
14
16
20
26
30
34
40
50
50
60
60
64
64
A
32.0
32.0
37.1
39.6
44.7
52.3
57.4
62.5
70.1
82.8
82.8
95.5
95.5
100.6
100.6
B
17.5
17.5
22.6
25.1
30.2
37.8
42.9
48.0
55.6
68.3
68.3
81.0
81.0
86.1
86.1
C
10.16
10.16
15.24
17.78
22.86
30.48
35.56
40.64
48.26
60.96
60.96
73.66
73.66
78.74
78.74
E
21.8
21.8
26.9
29.5
34.5
42.2
47.2
52.3
59.9
72.6
72.6
85.3
85.3
90.4
90.4
27.9
27.9
33.0
35.5
40.6
48.3
53.3
58.4
66.0
78.7
78.7
91.4
91.4
96.5
96.5
FPolarizing Slot
(Note 1)
None
One at center
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
Polarizing Key Install
(Note 2)
One on right side
None
One on right side
One on right and
left sides, resp.
D
28.14
MAX51.1
28.14
MAX51.1
33.24
MAX56.2
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
MAX101.9
78.94
MAX101.9
91.64
MAX114.6
91.64
MAX114.6
96.74
MAX119.7
96.74
MAX119.7
B21
■Four-Wall Straight Through hole
BPCB mounting pattern
Note 1, Note 2: The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shown below.
Note 3: The spacer moves to the right according to the number of
contacts.
Note 4: The 10, 50, 60 and 64 contact connectors contain two types of
polarizing slots.
Use products, confirming (Note 1) (Note 2).
Note 5: The 6 contact has no polarity mark.
■n=number of contacts
Unit:mm
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
The products marked with
★
comply with MIL standard.
CL No.Part Number
562-0503-9
610-0111-8
610-0181-3
610-0112-0
610-0113-3
610-0114-6
610-0115-9
610-0116-1
610-0117-4
610-0118-7
610-0119-0
610-0141-9
610-0120-9
610-0142-1
610-0121-1
610-0143-4
HIF3-6PA-2.54DSA
HIF3BA-10PA-2.54DSA
HIF3BD-10PA-2.54DSA
HIF3BA-14PA-2.54DSA
HIF3BA-16PA-2.54DSA
HIF3BA-20PA-2.54DSA
HIF3BA-26PA-2.54DSA
HIF3BA-30PA-2.54DSA
HIF3BA-34PA-2.54DSA
HIF3BA-40PA-2.54DSA
HIF3BA-50PA-2.54DSA
HIF3BB-50PA-2.54DSA
HIF3BA-60PA-2.54DSA
HIF3BB-60PA-2.54DSA
HIF3BA-64PA-2.54DSA
HIF3BB-64PA-2.54DSA
Number of Contacts
6
10
10
14
16
20
26
30
34
40
50
50
60
60
64
64
A
26.92
32.0
32.0
37.1
39.6
44.7
52.3
57.4
62.5
70.1
82.8
82.8
95.5
95.5
100.6
100.6
B
12.42
17.5
17.5
22.6
25.1
30.2
37.8
42.9
48.0
55.6
68.3
68.3
81.0
81.0
86.1
86.1
C
05.08
10.16
10.16
15.24
17.78
22.86
30.48
35.56
40.64
48.26
60.96
60.96
73.66
73.66
78.74
78.74
E
16.7
21.8
21.8
26.9
29.5
34.5
42.2
47.2
52.3
59.9
72.6
72.6
85.3
85.3
90.4
90.4
22.82
27.9
27.9
33.0
35.5
40.6
48.3
53.3
58.4
66.0
78.7
78.7
91.4
91.4
96.5
96.5
FPolarizing Slot
(Note 1)
One at center
None
One at center
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
Polarizing Key Install
(Note 2)
None
One on right side
None
One on right side
One on right and
left sides, resp.
D
23.06
MAX46.02
28.14
MAX51.1
28.14
MAX51.1
33.24
MAX56.2
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
MAX101.9
78.94
MAX101.9
91.64
MAX114.6
91.64
MAX114.6
96.74
MAX119.7
96.74
MAX119.7
B22
■Three Wall Angle Type
BPCB mounting pattern
Note 1, Note 2: The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shown below.
Note 3: The spacer moves according to the number of contacts.
Note 4: The 10 contact connector consists of two types.
Use products, confirming (Note 1) (Note 2).
Note 5: The 6 contact has no polarity mark.
Note 6: The nut built-in specification product is also provided.
The product can be fixed by M2 screws from the rear side.
Use the screw of (board thickness) +4 mm under the neck.
■n=number of contacts
Unit:mm
★
★
★
★
★
★
★
★
★
★
The products marked with
★
comply with MIL standard.
CL No.Part Number
610-0051-8
610-0151-2
610-0052-0
610-0053-3
610-0054-6
610-0055-9
610-0056-1
610-0057-4
610-0058-7
610-0059-0
610-0060-9
HIF3BD-10PA-2.54DS
HIF3BC-10PA-2.54DS
HIF3BD-16PA-2.54DS
HIF3BD-20PA-2.54DS
HIF3BD-26PA-2.54DS
HIF3BD-30PA-2.54DS
HIF3BD-34PA-2.54DS
HIF3BD-40PA-2.54DS
HIF3BD-50PA-2.54DS
HIF3BD-60PA-2.54DS
HIF3BD-64PA-2.54DS
Number of Contacts
10
10
16
20
26
30
34
40
50
60
64
A
32.0
32.0
39.6
44.7
52.3
57.4
62.5
70.1
82.8
95.5
100.6
B
17.5
17.5
25.1
30.2
37.8
42.9
48.0
55.6
68.3
81.0
86.1
C
10.16
10.16
17.78
22.86
30.48
35.56
40.64
48.26
60.96
73.66
78.74
E
21.8
21.8
29.5
34.5
42.2
47.2
52.3
59.9
72.6
85.3
90.4
27.9
27.9
35.5
40.6
48.3
53.3
58.4
66.0
78.7
91.4
96.5
FPolarizing Slot
(Note 1)
None
One at center
One on right and left sides, resp.
Polarizing Key Install
(Note 2)
One on right side
None
One on right and
left sides, resp.
D
28.14
MAX51.1
28.14
MAX51.1
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
MAX101.9
91.64
MAX114.6
96.74
MAX119.7
B23
■Three Wall Straight Through hole
BPCB mounting pattern
Note1,Note2: The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shown
below.
Note3: The spacer moves to the right according to the number of
contacts.
Note4: The 10 contact connector consists of two types.
Use products, referring to (Note 1) and (Note 2).
Note5: The 6 contact has no polarity mark.
■n=number of contacts
Unit:mm
★
★
★
★
★
★
★
★
★
★
The products marked with
★
comply with MIL standard.
CL No.Part Number
610-0071-5
610-0161-6
610-0072-8
610-0073-0
610-0074-3
610-0075-6
610-0076-9
610-0077-1
610-0078-4
610-0079-7
610-0080-6
HIF3BD-10PA-2.54DSA
HIF3BC-10PA-2.54DSA
HIF3BD-16PA-2.54DSA
HIF3BD-20PA-2.54DSA
HIF3BD-26PA-2.54DSA
HIF3BD-30PA-2.54DSA
HIF3BD-34PA-2.54DSA
HIF3BD-40PA-2.54DSA
HIF3BD-50PA-2.54DSA
HIF3BD-60PA-2.54DSA
HIF3BD-64PA-2.54DSA
Number of Contacts
10
10
16
20
26
30
34
40
50
60
64
A
32.0
32.0
39.6
44.7
52.3
57.4
62.5
70.1
82.8
95.5
100.6
B
17.5
17.5
25.1
30.2
37.8
42.9
48.0
55.6
68.3
81.0
86.1
C
10.16
10.16
17.78
22.86
30.48
35.56
40.64
48.26
60.96
73.66
78.74
E
21.8
21.8
29.5
34.5
42.2
47.2
52.3
59.9
72.6
85.3
90.4
27.9
27.9
35.5
40.6
48.3
53.3
58.4
66.0
78.7
91.4
96.5
FPolarizing Slot
(Note 1)
None
One at center
One on right and left sides, resp.
Polarizing Key Install
(Note 2)
One on right side
None
One on right and
left sides, resp.
D
28.14
MAX51.1
28.14
MAX51.1
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
MAX101.9
91.64
MAX114.6
96.74
MAX119.7
B24
■Four Wall Wrapping Type
BPCB mounting pattern
Note 1, Note 2. The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shown below.
Note 3. The spacer moves to the right according to the number of
contacts.
Note 4. The 10, 50, 60 and 64 contact connectors consists of two types.
Use products, confirming (Note 1) (Note 2).
Note 5. The mark *indicates the number of contacts.
Note 6. The nut built-in specification product is also provided.
The product can be fixed by M2 screws from the rear side.
Use the screw of (board thickness) +4 mm under the neck.
■n=number of contacts
Unit:mm
★
★
★
★
★
★
★
★
★
★
★
★
★
★
The products marked with
★
comply with MIL standard.
CL No.Part Number
610-0503-8
610-0492-3
610-0493-6
610-0494-9
610-0495-1
610-0496-4
610-0497-7
610-0498-0
610-0499-2
610-0504-0
610-0500-0
610-0505-3
610-0501-2
610-0506-6
610-0502-5
HIF3BA-10P-2.54W
HIF3BD-10P-2.54W
HIF3BA-14P-2.54W
HIF3BA-16P-2.54W
HIF3BA-20P-2.54W
HIF3BA-26P-2.54W
HIF3BA-30P-2.54W
HIF3BA-34P-2.54W
HIF3BA-40P-2.54W
HIF3BA-50P-2.54W
HIF3BB-50P-2.54W
HIF3BA-60P-2.54W
HIF3BB-60P-2.54W
HIF3BA-64P-2.54W
HIF3BB-64P-2.54W
Number of Contacts
10
10
14
16
20
26
30
34
40
50
50
60
60
64
64
A
32.0
32.0
37.1
39.6
44.7
52.3
57.4
62.5
70.1
82.8
82.8
95.5
95.5
100.6
100.6
B
17.5
17.5
22.6
25.1
30.2
37.8
42.9
48.0
55.6
68.3
68.3
81.0
81.0
86.1
86.1
C
10.16
10.16
15.24
17.78
22.86
30.48
35.56
40.64
48.26
60.96
60.96
73.66
73.66
78.74
78.74
E
21.8
21.8
26.9
29.5
34.5
42.2
47.2
52.3
59.9
72.6
72.6
85.3
85.3
90.4
90.4
27.9
27.9
33.0
35.5
40.6
48.3
53.3
58.4
66.0
78.7
78.7
91.4
91.4
96.5
96.5
FPolarizing Slot
(Note 1)
None
One at center
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
Polarizing Key Install
(Note 2)
One on right side
None
One on right side
One on right and
left sides, resp.
D
28.14
MAX51.1
28.14
MAX51.1
33.24
MAX56.2
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
MAX101.9
78.94
MAX101.9
91.64
MAX114.6
91.64
MAX114.6
96.74
MAX119.7
96.74
MAX119.7
B25
■Four Wall Straight Through hole
[Flux Blister Prevention Type]
BPCB mounting pattern
Note1: The number of polarizing slot and key installed positions changes
according to products. Refer to the list as shown below.
■n=number of contacts
Unit:mm
★
★
★
★
★
★
★
★
★
★
★
The products marked with
★
comply with MIL standard.
CL No.Part Number
610-0701-1
610-0722-1
610-0703-7
610-0704-0
610-0705-2
610-0706-5
610-0707-8
610-0708-0
610-0709-3
610-0721-9
610-0723-4
610-0724-7
HIF3CA-10PA-2.54DSA
HIF3CD-10PA-2.54DSA
HIF3CA-16PA-2.54DSA
HIF3CA-20PA-2.54DSA
HIF3CA-26PA-2.54DSA
HIF3CA-30PA-2.54DSA
HIF3CA-34PA-2.54DSA
HIF3CA-40PA-2.54DSA
HIF3CA-50PA-2.54DSA
HIF3CB-50PA-2.54DSA
HIF3CB-60PA-2.54DSA
HIF3CB-64PA-2.54DSA
Number of Contacts
10
10
16
20
26
30
34
40
50
50
60
64
A
32.0
32.0
39.6
44.7
52.3
57.4
62.5
70.1
82.8
82.8
95.5
100.6
B
17.5
17.5
25.1
30.2
37.8
42.9
48.0
55.6
68.3
68.3
81.0
86.1
C
10.16
10.16
17.78
22.86
30.48
35.56
40.64
48.26
60.96
60.96
73.66
78.74
E
21.8
21.8
29.5
34.5
42.2
47.2
52.3
59.9
72.6
72.6
85.3
90.4
27.9
27.9
35.5
40.6
48.3
53.3
58.4
66.0
78.7
78.7
91.4
96.5
FPolarizing Slot
None
One at center
One on right and left sides, resp.
One at center
Polarizing Key Install
One on right side
None
One on right and
left sides, resp.
D
28.14
MAX51.1
28.14
MAX51.1
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
MAX101.9
78.94
MAX101.9
91.64
MAX114.6
96.74
MAX119.7
B26
■Two Stage Staking Right Angle Through hole
Note 1, Note 2: The number of polarizing slot and key installed positions changes according to products. Refer
to the list as shown below.
Note 3: The spacer moves to the right according to the number of contacts.
Note 4: The 10, 50, 60 and 64 contact connectors consists of two types.
Use products, confirming (Note 1) (Note 2).
Note 5: The mark *ndicates the number of contacts.
Note 6: The locator is located optionally.
Unit:mm
★
★
★
★
★
★
★
★
★
★
★
★
★
The products marked with
★
comply with MIL standard.
CL No.Part Number
610-1502-0
610-1503-3
610-1505-9
610-1506-1
610-1507-4
610-1508-7
610-1509-0
610-1510-9
610-1511-1
610-1512-4
610-1513-7
610-1514-0
610-1515-2
610-1516-5
HIF3BA-10PA-2.54WB
HIF3BD-10PA-2.54WB
HIF3BA-16PA-2.54WB
HIF3BA-20PA-2.54WB
HIF3BA-26PA-2.54WB
HIF3BA-30PA-2.54WB
HIF3BA-34PA-2.54WB
HIF3BA-40PA-2.54WB
HIF3BA-50PA-2.54WB
HIF3BB-50PA-2.54WB
HIF3BA-60PA-2.54WB
HIF3BB-60PA-2.54WB
HIF3BA-64PA-2.54WB
HIF3BB-64PA-2.54WB
Number of Contacts
10
10
16
20
26
30
34
40
50
50
60
60
64
64
A
32.0
32.0
39.6
44.7
52.3
57.4
62.5
70.1
82.8
82.8
95.5
95.5
100.6
100.6
B
17.5
17.5
25.1
30.2
37.8
42.9
48.0
55.6
68.3
68.3
81.0
81.0
86.1
86.1
C
10.16
10.16
17.78
22.86
30.48
35.56
40.64
48.26
60.96
60.96
73.66
73.66
78.74
78.74
E
21.8
21.8
29.5
34.5
42.2
47.2
52.3
59.9
72.6
72.6
85.3
85.3
90.4
90.4
27.9
27.9
35.5
40.6
48.3
53.3
58.4
66.0
78.7
78.7
91.4
91.4
96.5
96.5
FPolarizing Slot
(Note 1)
None
One at center
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
Polarizing Key Install
(Note 2)
One on right side
None
One on right and
left sides, resp.
D
28.14
MAX51.1
28.14
MAX51.1
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
MAX101.9
78.94
MAX101.9
91.64
MAX114.6
91.64
MAX114.6
96.74
MAX119.7
96.74
MAX119.7
B27
BCombination Pattern
BPCB mounting pattern
■Mounting Hole Spacer
Note : Fix the HIF3-mounting hole spacer by screws between upper stage and lower stage connectors.
Part Number CL No. Finish
HIF-3 mounting hole spacer
562-0714-4 PBT Black
Note : 2 pieces are contained in a bag.
B28
BPolarizing Key
Note1: One unit of this
product is a set of five
pieces in conjunction
with a runner. The unit
for sale is defined one
pack containing 20
pieces.
Note2: This product is
applicable to the
HIF3BA-*D2.54R
product.
Part Number CL No. Material
HIF3-GPIN(A) 562-0126-6 Poly acetal (white) Remarks
A set of 5 pieces
Part Number CL No. Material
HIF3BA-GPIN 612-0500-2 Poly acetal (white) Remarks
A set of 5 pieces
HIF3-GPIN(A) HIF3BA-GPIN
Note1: One unit of this
product is a set of five
pieces in conjunction
with a runner. The unit
for sale is defined one
pack containing 20
pieces.
Note2: This product is
applicable to HIF3A-
*D2.54R, HIF3C-
*D2.54C and
HIF3BA-*D2.54C
products.
HIF3B-GK
CL562-0601-8
B29
BHIF3-Multi Clamp BHIF3-*CL Pull Tab
Lock G
●Low Profile Lock Pin Header
BLock
●F Type Lock Pin Header
Lock F
Part Number : HIF3BAG-**PA-2.54DSA
●Low profile type, and used for lock ejection.
Connector height is reduced.
Since no connector clamp is needed on the cable side,
this is used without turning back on the cable side. Take
care about this point.
Part Number : HIF3BAG-**PA-2.54DSA
●Locking range more reduced than conventional lock type.
Even if connectors are aligned laterally, the mounting
space is reduced.
Note : The clamp must be replaced for HIF3A socket type
50 contacts only. Take care about this point.
This clamp is used for intermediate connection in the
bus-line system, etc. Remove compulsory force from the
insulation displacement area of the connector in
intermediate connection.
Note: The pin header corresponds to the HIF3BAE
series (lock E).
This pull tab is used for the HIF3 series equipped with cable clamp
function. Remove all compulsory force, which is loaded on the
insulation displacement area of the connector for extraction.
Note: This HIF3-* Pull Tab can not be used for HIF3BA-*PD.
Note: The pin header corresponds to the HIF3BAE series (lock E).
27.3
21.5
B30
Part Number CL No.
610-1041-0
610-1051-3
610-1042-2
610-1043-5
610-1044-8
610-1045-0
610-1046-3
610-1047-6
610-1048-9
610-1061-7
610-1049-1
610-1062-0
610-1064-5
610-1063-2
Number of Contacts
A B
10
14
16
20
26
30
34
40
50
60
64
17.25
22.35
24.8
29.95
37.55
42.63
47.75
55.35
68.04
80.77
85.85
10.16
15.24
17.78
22.86
30.48
35.56
40.64
48.26
60.96
73.66
78.74
Polarizing Guide
One at center
One right and left side, resp.
One at center
One right and left side, resp.
One at center
One right and left side, resp.
One at center
HIF3BA-10D-2.54C
HIF3BA-14D-2.54C
HIF3BA-16D-2.54C
HIF3BA-20D-2.54C
HIF3BA-26D-2.54C
HIF3BA-30D-2.54C
HIF3BA-34D-2.54C
HIF3BA-40D-2.54C
HIF3BA-50D-2.54C
HIF3BB-50D-2.54C
HIF3BA-60D-2.54C
HIF3BB-60D-2.54C
HIF3BA-64D-2.54C
HIF3BB-64D-2.54C
Unit: mm
■Socket for Crimping
B31
■Cover Case for Crimping socket
Part Number CL No.
562-0201-0
562-0202-2
562-0203-5
562-0204-8
562-0205-0
562-0206-3
562-0207-6
Number of Contacts
A B
20
26
30
34
40
50
60
24.5
30.2
32.2
34.2
36.2
39.2
42.2
18.0
20.0
22.0
24.0
26.0
29.0
32.0
C
12.0
14.0
16.0
18.0
20.0
23.0
26.0
D
30.5
32.0
33.0
33.5
35.5
38.0
40.5
E
29.95
37.55
42.63
47.75
55.35
68.04
80.77
HIF3-20CV
HIF3-26CV
HIF3-30CV
HIF3-34CV
HIF3-40CV
HIF3-50CV
HIF3-60CV
Unit: mm
Note: The type F lock pin header cannot be used for a mating member.
B32
HIF3-2226SC
HIF3-2226SCA
Applicable cable
Manual crimping tool
562-0079-8
562-0244-2
gold plated contact in bag
Selective gold plated contact in bag
AWG#22 to #26 UL 1007 Stranded wire
HIF3-T2226HC
HIF3-2428SC
HIF3-2428SCA
Applicable cable
Manual crimping tool
562-0124-0
562-0246-8
gold plated contact in bag
Selective gold plated contact in bag
AWG#24 to #28 UL 1007 Stranded wire
HIF3-TA2428HC
HIF3-2022SC
Applicable cable
Manual crimping tool
562-0492-4
gold plated contact in bag
AWG#20 to #22 UL 1007 Stranded wire
HIF3-TA2022HC
■Contact for Crimping Socket
HIF3-2226SCF
HIF3-2226SCFA
Applicable cable
**
562-0080-7
562-0245-5
gold plated contact in reel
Selective gold plated contact in reel
AWG#22 to #26 UL 1007 Stranded wire
Note:* products have both side careers.
HIF3-2226SCC
HIF3-2630SCC
Part Number
613-0004-7
613-0003-4
CL No.
AWG#22 to #26 UL 1007 Stranded wire
AWG#26 to #30 UL 1007 Stranded wire
Applicable Cable
HIF3-TB2226HC
HIF3-TB2630HC
Manual Crimp Tool
F
2.6
2.1
E
2.3
2.0
D
1.8
1.35
C
1.8
1.4
B
0.8
0.8
A
11.5
11.5
Part Number
HIF3-2226SCFC
HIF3-2630SCFC
HIF3A-3236SCFC
CL No.
613-0002-1
613-0001-9
613-0005-0
Applicable Cable
AWG#22 to #26 UL 1007 Stranded wire
AWG#26 to #30 UL 1007 Stranded wire
AWG#32 to #36 UL 1007 Stranded wire
F
2.6
2.1
1.5
E
2.3
2.0
1.4
D
1.8
1.35
1.1
C
1.8
1.4
1.1
B
0.8
0.8
1.7
A
11.5
11.5
12.4
HIF3-2428SCF
HIF3-2428SCFA
Applicable cable
562-0125-3
562-0247-0
gold plated contact in reel
Selective gold plated contact in reel
AWG#24 to #28 UL 1007 Stranded wire
HIF3-2022SCF
Applicable cable
562-0493-7
gold plated contact in reel
AWG#20 to #22 UL 1007 Stranded wire
Type VA (Selective gold plated in reel)
Type VA (Selective gold plated contact in bag)
B33
BTools
●Crimping Tool
Manual Crimping Tool HIF3-T2226HC
●Automatic Crimping Tool (Type: CM-105)
●Contact Extraction Tools How to use the extraction tool
(1) How to extract contacts
As shown in Figure 1, where the
extraction tool is inserted in the lance
fixed slot on the insulated case, slightly
pull the cable, and the contact can be
removed.
(2) How to adjust the lance (raise)
In order to re-insert the contact
removed from the insulated case,
raise the contact lance area using the
tool A, and re-insert the contact, as
shown in Figure 2.
Figure 1
Part Number
HIF1-PO CL No.
550-0049-7
Part Number
HIF3-T2226HC CL No.
550-0063-8
Part Number
CM-105 CL No.
901-0005-4
B34
Type
Manual
Automatic
Item
Manual crimping tool
Automatic crimping tool unit
Applicator
Part Number
HIF3-T2226HC
HIF3-TA2428HC
HIF3-TA2022HC
HIF3-TB2226HC
HIF3-TB2630HC
CM-105
AP105-HIF3-22-28SCF
AP105-HIF3-22-28SCFA
AP105-HIF3-2022S
AP105-HIF3-2226SCFC
AP105-HIF3-2630SCFC
AP105-HIF3-3236SCFC
HIF1-PO
CL No.
550-0063-8
550-0100-2
550-0124-0
550-0154-1
550-0155-4
901-0005-4
901-4031-6
901-4030-3
901-4027-9
901-4005-6
901-4006-9
901-4007-1
550-0049-7
Applicable Contact
HIF3-2226SC
HIF3-2226SCA
HIF3-2428SC
HIF3-2428SCA
HIF3-2022SC
HIF3-2226SCC
HIF3-2630SCC
–––––––
HIF3-2226SCF
HIF3-2428SCF
HIF3-2226SCFA
HIF3-2428SCFA
HIF3-2022SCF
HIF3-2226SCFC
HIF3-2630SCFC
HIF3-3236SCFC
–––––––
Applicable Cable
AWG#22 to #26
AWG#24 to #28
AWG#20 to #22
AWG#22 to #26
AWG#26 to #30
–––––––
AWG#22 to #26
AWG#24 to #28
AWG#22 to #26
AWG#24 to #28
AWG#20 to #22
AWG#22 to #26
AWG#26 to #30
AWG#32 to #36
–––––––
Extraction tool
(Note1)
(Note1)
Note1: AP106-HIF3-22-28SCF and AP105-HIF3-22-28CFA can be modified by changing a few parts.
B35
BSocket Side (Crimping) Assembling Procedures
(1) As shown in Figure 1, peel the applicable cable (AWG#20 to #26) jacket, and connect it using crimping jig HIF3-TA2022HC,
HIF3-TA2226HC, or HIF3-TA2426HC. In this case, insert the cable so as to hit the contact cable stripper position as shown
Figure 2.
(2) After connection as shown Figure 2, check the contact direction, and insert the contact as shown Figures 3 and 4. Slightly pull
the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (A).
Note : For handling procedures for special crimping tools, refer to the "Handling Instruction Manual".
Figure 1 Figure 2
Figure 3 Figure 4
B36
HIF3B Connection Circuit Diagram
Type AB
Type AD
Type CD
Type ABType ADType CD
B37
Type AC
Type CC
Type AA
Type AC
Type CC
Type AA
B38
HIF2E R(S) A to HIF3B Connection Circuit Diagram
Type AA
Type AC
B39
Type BA
Type BC
B40
HIF2E R(S)B to HIF3 Connection Circuit Diagram
Type AA
Type AC
B41
Type BA
Type BC
