AXICOM Telecom-, Signal and RF Relays P2 V23079 Relay 108-98002 * Aug. 08 Rev. F * ECOC: JM10 AXICOM Telecom-, Signal and RF Relays 108-98002 Rev. F P2 V23079 Relay Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties (and all express warranties, except as otherwise stated in this datasheet) regarding the information contained herein, including but not limited to any implied warranties or merchantability or fitness for a particular purpose. It is recommended that you test any new or replacement product before incorporating into a system. The dimensions in this datasheet are for reference purpose only and are subject to change without notice. Specifications are subject to change without notice. Index UL 508 UL 60950 IEC/EN60950 File No. E 111441 IEC Ref. Cert. No. 3271 Dimensions Coil Operating Range Relay Code Coil Data and Ordering Information Contact Data Insulation General Data Packing All specifications subject to change. Consult Tyco Electronics for latest specifications. 4 5 6 7 10 11 11 13 2 of 15 AXICOM Telecom-, Signal and RF Relays 108-98002 Rev. F P2 V23079 Relay 2 pole telecom / signal relay, polarized, Through Hole Type (THT) or Surface Mount Technology (SMT), Relay types: non-latching with 1 coil latching with 2 coils latching with 1 coil ROHS compliant (Directive 2002/95/EC) as per product date code 0427. Features * * * * * * * Standard telecom relay (ringing and test access) Slim line 15 x 7.5 mm, 0.590 x 0.295 inch Switching current 5 A 2 changeover contacts (2 form C / DPDT) Bifurcated contacts Immersion cleanable High sensitivity results in low nominal power consumption 140 mW for non-latching and latching with 2 coils 70 mW for latching with 1 coil * For single coil version: - Surge voltage resistance between contact and coil for single coil version: - 2.5 kV (2 / 10 s) meets the Telcordia Requirement GR-1089 - 1.5 kV (10 / 160 s) meets FCC Part 68 Typical applications * Communications equipment linecard application (ringing and test access) PABX Voice over IP * Office equipment * Measurement and control equipment * Automotive equipment CAN bus, keyless entry, speaker switch * Medical equipment * Consumer electronics Set Top Boxes, HiFi Options Insulation category * 1500 Vrms between open contacts Basic insulation according Working voltage Mains supply voltage Repetitive peak voltage Pollution degree Flammability classification Maximum operating temperature All specifications subject to change. Consult Tyco Electronics for latest specifications. IEC / EN 60950 300 Vrms 250 Vrms 2500 V Internal: 1 External: 2 V-0 85 C 3 of 15 AXICOM Telecom-, Signal and RF Relays 108-98002 Rev. F P2 V23079 Relay Dimensions THT V23079-x1xxx-B301 standard coil mm inch L 14.5 0.10 0.570 0.004 W 7.2 0.10 0.283 0.004 H 9.8 0.10 0.385 0.004 T 3.25 - 0.25 0.128 - 0.010 T1 N/A N/A T2 N/A N/A Tw 0.5 0.05 0.020 0.002 S 0.55 - 0.15 0.022 - 0.006 Dimensions in mm THT V23079-x2xxx-B301 overmolded coil mm inch 14.6 0.10 0.575 0.004 7.2 0.10 0.283 0.004 9.5 0.10 0.374 0.004 3.25 - 0.25 0.128 - 0.010 N/A N/A N/A N/A 0.5 0.05 0.020 0.002 0.45 0.018 0.002 THT Version SMT long terminals V23079-x1xxx-B301 standard coil mm inch 14.5 0.10 0.570 0.004 7.2 0.10 0.283 0.004 10.4 0.15 0.409 0.006 N/A N/A 5.52 0.15 0.217 0.006 9.4 0.15 0.370 0.006 0.5 0.05 0.020 0.002 N/A N/A SMT long terminals V23079-x2xxx-B301 overmolded coil mm inch 14.6 0.10 0.575 0.004 7.2 0.10 0.283 0.004 9.9 0.10 0.390 0.004 N/A N/A 5.52 0.217 0.006 9.4 0.15 0.370 0.006 0.5 0.05 0.020 0.002 N/A N/A SMT short terminals V23079-x1xxx-B301 standard coil mm inch 14.5 0.10 0.570 0.004 7.2 0.10 0.283 0.004 10.4 0.15 0.409 0.006 N/A N/A 5.52 0.217 0.006 7.4 0.15 0.291 0.006 0.5 0.05 0.020 0.002 N/A N/A SMT short terminals V23079-x2xxx-B301 overmolded coil mm inch 14.6 0.10 0.575 0.004 7.2 0.10 0.283 0.004 9.9 0.10 0.390 0.004 N/A N/A 5.52 0.217 0.006 7.4 0.15 0.291 0.006 0.5 0.05 0.020 0.002 N/A N/A SMT Version Long terminals Short terminals Coplanarity 0.1mm Coplanarity 0.1mm Mounting hole layout Solder pad layout View onto the component side of the PCB (top view) View onto the component side of the PCB (top view) Long terminals P2 SMT S Short terminals 0,9 0,1 Note: Hole for pin 6 and 7 only for latching with 2 coils. Basic grid 2.54 mm Note: Solder pad for pin 6 and 7 only for latching with 2 coils Note: Solder pad for pin 6 and 7 only for latching with 2 coils Terminal assignment Relay - top view Non-latching type Latching type, Latching, 2 coils not energized condition reset condition reset condition Contacts in reset position. Both coils can be used either as set or reset coils. Latching type: Contacts in reset position. Contact position might change during transportation and must be reset before use. All specifications subject to change. Consult Tyco Electronics for latest specifications. 4 of 15 AXICOM Telecom-, Signal and RF Relays 108-98002 Rev. F P2 V23079 Relay Coil Operating Range 3.4 70 mW 3.2 Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A Coil Voltage [U/Unom] 3 2.8 2.6 Unom = Nominal coil voltage Umax. = Upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energized 2.4 2.2 2 Uop. min. = Lower limit of the operative range of the coil voltage (reliable operate voltage) 1.8 1.6 1.4 1.2 1 For latching relays Uset min. resp. Ureset min. Unom. nominal coil voltage 0.8 Uop. min. 0.6 Urel. min. = Lower limit of the operative range of the coil voltage (reliable release voltage) 0.4 0.2 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 Ambient Temperature [C] 140 mW 2.8 2.6 Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A 2.4 Coil Voltage [U/Unom] 2.2 2 1.8 1.6 1.4 1.2 1 Unom. nominal coil voltage 0.8 Uop. min. Urel. min. 0.6 0.4 0.2 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 Ambient Temperature [C] 200 mW 2.8 Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A 2.6 2.4 Coil Voltage [U/Unom] 2.2 2 1.8 1.6 1.4 1.2 1 Unom. nominal coil voltage 0.8 Uop. min. Urel. min. 0.6 0.4 0.2 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 Ambient Temperature [C] All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 15 AXICOM Telecom-, Signal and RF Relays 108-98002 Rev. F P2 V23079 Relay Relay Code V 2 3 0 7 9 Identification of the Miniature Relay P2 Relay type THT version A = non-latching, 1 coil B = latching, 2 coils C = latching, 1 coil SMT version with long terminals D = non-latching, 1 coil E = latching, 2 coils F = latching, 1 coil SMT version with short terminals G = non-latching, 1 coil H = latching, 2 coils J = latching, 1 coil Coil type 1 = standard coil; B1, E1, F1, J1, H1 2 = overmolded coil, A1*, A2, C1*, D1*, D2, G1*, G2 (only non latching versions, i.e. relay type A, D, G) *both standard and overmolded coil possible Coil number Non Latching, 1 coil Latching, 1 coil 008 = 3 V nominal voltage 108 = 3 V nominal voltage 011= 4.5 V 111 = 4.5 V 001 = 5 V 101 = 5 V 002 = 6 V 102 = 6 V 006 = 9 V 106 = 9 V 003 = 12 V 103 = 12 V 005 = 24 V 105 = 24 V Latching, 2 coils 219 = 2.0 V 218 = 2.4 V nominal voltage 208 = 3 V 211 = 4.5 V 201 = 5 V 202 = 6 V 206 = 9 V 203 = 12 V 205 = 24 V Contact arrangement / material B301 = 2 changeover contacts; silver nickel, gold-plated, against silver nickel, gold-plated B201 = 2 changeover contacts; silver palladium, gold-plated, against silver palladium Ordering example: V23079-D2001-B301 Miniature relay P2 SMT version with long terminals (overmolded coil), non-latching, 1 coil, 5 V nominal voltage, 2 changeover contacts, silver nickel gold-covered contacts All specifications subject to change. Consult Tyco Electronics for latest specifications. 6 of 15 AXICOM Telecom-, Signal and RF Relays 108-98002 Rev. F P2 V23079 Relay Coil Data (values at 23 C) Nominal voltage Unom Vdc Operate/set voltage range Ordering Information Release/ reset voltage Minimum Coil power Coil Resistance Relay code Tyco part number Vdc mW / 10 % 0.30 0.40 0.45 0.50 0.60 0.90 1.20 2.40 140 140 140 140 140 140 140 140 64 114 145 178 257 578 1029 4114 V23079-A1008-B301 V23079-A1016-B301 V23079-A1011-B301 V23079-A1001-B301 V23079-A1002-B301 V23079-A1006-B301 V23079-A1003-B301 V23079-A1005-B301 2-1393788-2 2-1393788-9 2-1393788-4 1393788-3 1393788-8 2-1393788-0 1-1393788-1 1-1393788-6 6.50 9.80 10.90 13.00 19.60 26.15 0.30 0.45 0.50 0.60 0.90 1.20 140 140 140 140 140 140 64 145 178 257 578 1029 V23079-A2008-B301 V23079-A2011-B301 V23079-A2001-B301 V23079-A2002-B301 V23079-A2006-B301 V23079-A2003-B301 6-1419120-6 3-1393789-9 3-1393789-5 3-1393789-6 3-1393789-8 3-1393789-7 5.20 6.50 9.80 10.90 13.00 19.60 26.15 52.30 1.80 2.25 3.38 3.75 4.50 6.75 9.00 18.00 140 140 140 140 140 140 140 140 41 64 145 178 257 578 1029 4114 V23079-B1218-B301 V23079-B1208-B301 V23079-B1211-B301 V23079-B1201-B301 V23079-B1202-B301 V23079-B1206-B301 V23079-B1203-B301 V23079-B1205-B301 1422002-8 4-1393788-1 4-1393788-2 3-1393788-3 3-1393788-5 3-1393788-9 3-1393788-6 3-1393788-7 4.30 5.20 6.50 10.90 1.50 1.80 2.25 3.75 140 140 140 140 28 41 64 178 V23079-B2219-B301 V23079-B2218-B301 V23079-B2208-B301 V23079-B2201-B301 1-1422002-2 1-1422002-1 1-1422002-0 1422002-9 9.20 13.85 15.33 18.50 27.75 37.00 74.00 -2.25 -3.38 -3.75 -4.50 -6.75 -9.00 -18.00 70 70 70 70 70 70 70 128 289 357 514 1157 2057 8228 V23079-C1108-B301 V23079-C1111-B301 V23079-C1101-B301 V23079-C1102-B301 V23079-C1106-B301 V23079-C1103-B301 V23079-C1105-B301 5-1393788-3 5-1393788-4 4-1393788-5 4-1393788-7 5-1393788-1 4-1393788-8 5-1393788-0 0.30 0.45 0.50 0.60 0.90 1.20 2.40 140 140 140 140 140 140 140 64 145 178 257 578 1029 4114 V23079-D1008-B301 V23079-D1011-B301 V23079-D1001-B301 V23079-D1002-B301 V23079-D1006-B301 V23079-D1003-B301 V23079-D1005-B301 6-1393788-1 6-1393788-2 5-1393788-5 5-1393788-6 5-1393788-9 5-1393788-7 5-1393788-8 Minimum voltage Umin Maximum voltage Umax Vdc Vdc THT Standard, non-latching, standard 1 coil 3 4 4.5 5 6 9 12 24 2.25 3.00 3.38 3.75 4.50 6.75 9.00 18.00 6.50 8.70 9.80 10.90 13.00 19.60 26.15 52.30 THT non-latching, overmolded 1 coil 3 4.5 5 6 9 12 2.25 3.38 3.75 4.50 6.75 9.00 THT latching, standard 2 coils 2.4 3 4.5 5 6 9 12 24 1.80 2.25 3.38 3.75 4.50 6.75 9.00 18.00 THT latching, overmolded 2 coils 2 2.4 3 5 1.50 1.80 2.25 3.75 THT latching, standard 1 coil 3 4.5 5 6 9 12 24 2.25 3.38 3.75 4.50 6.75 9.00 18.00 SMT long pins, non-latching, standard 1 coil 3 4.5 5 6 9 12 24 2.25 3.38 3.75 4.50 6.75 9.00 18.00 6.50 9.80 10.90 13.00 19.60 26.15 52.30 Further coil versions are available on request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 7 of 15 AXICOM Telecom-, Signal and RF Relays 108-98002 Rev. F P2 V23079 Relay Coil Data (values at 23 C) Nominal voltage Unom Vdc Operate/set voltage range Minimum voltage Umin Maximum voltage Umax Vdc Vdc Ordering Information Release/ reset voltage Minimum Coil power Coil Resistance Relay code Tyco part number Vdc mW / 10 % 0.30 0.45 0.50 0.60 0.90 1.20 140 140 140 140 140 140 64 145 178 257 578 1029 V23079-D2008-B301 V23079-D2011-B301 V23079-D2001-B301 V23079-D2002-B301 V23079-D2006-B301 V23079-D2003-B301 4-1393789-7 4-1393789-8 4-1393789-3 4-1393789-4 4-1393789-6 4-1393789-5 1.50 1.80 2.25 3.38 3.75 4.50 6.75 9.00 18.00 140 140 140 140 140 140 140 140 140 28 41 64 145 178 257 578 1029 4114 V23079-E1219-B301 V23079-E1218-B301 V23079-E1208-B301 V23079-E1211-B301 V23079-E1201-B301 V23079-E1202-B301 V23079-E1206-B301 V23079-E1203-B301 V23079-E1205-B301 1-1422007-0 1422007-5 7-1393788-1 7-1393788-2 6-1393788-8 1393789-5 1393789-9 6-1393788-9 7-1393788-0 -2.25 -3.38 -3.75 -4.50 -6.75 -9.00 -18.00 70 70 70 70 70 70 70 128 289 357 514 1157 2057 8228 V23079-F1108-B301 V23079-F1111-B301 V23079-F1101-B301 V23079-F1102-B301 V23079-F1106-B301 V23079-F1103-B301 V23079-F1105-B301 7-1393788-5 1-1393789-4 7-1393788-3 1-1393789-0 1-1393789-2 7-1393788-4 1-1393789-1 0.30 0.45 0.50 0.60 0.90 1.20 2.40 140 140 140 140 140 140 140 64 145 178 257 578 1029 4114 V23079-G1008-B301 V23079-G1011-B301 V23079-G1001-B301 V23079-G1002-B301 V23079-G1006-B301 V23079-G1003-B301 V23079-G1005-B301 8-1393788-0 1-1393789-7 7-1393788-6 1-1393789-5 1-1393789-6 7-1393788-7 7-1393788-8 SMT long pins, non-latching, overmolded 1 coil 3 4.5 5 6 9 12 2.25 3.38 3.75 4.50 6.75 9.00 6.50 9.80 10.90 13.00 19.60 26.15 SMT long pins, latching, standard 2 coils 2 2.4 3 4.5 5 6 9 12 24 1.50 1.80 2.25 3.38 3.75 4.50 6.75 9.00 18.00 4.33 5.20 6.50 9.80 10.90 13.00 19.60 26.15 52.30 SMT long pins, latching, standard 1 coil 3 4.5 5 6 9 12 24 2.25 3.38 3.75 4.50 6.75 9.00 18.00 9.20 13.85 15.33 18.50 27.75 37.00 74.00 SMT short pins, non-latching, standard 1 coil 3 4.5 5 6 9 12 24 2.25 3.38 3.75 4.50 6.75 9.00 18.00 6.50 9.80 10.90 13.00 19.60 26.15 52.30 Further coil versions are available on request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 8 of 15 AXICOM Telecom-, Signal and RF Relays 108-98002 Rev. F P2 V23079 Relay Coil Data (values at 23 C) Nominal voltage Unom Vdc Operate/set voltage range Minimum voltage Umin Maximum voltage Umax Vdc Vdc Ordering Information Release/ reset voltage Minimum Coil power Coil Resistance Relay code Tyco part number Vdc mW / 10 % 0.30 0.40 0.45 0.50 0.60 0.90 1.20 140 140 140 140 140 140 140 64 114 145 178 257 578 1029 V23079-G2008-B301 V23079-G2016-B301 V23079-G2011-B301 V23079-G2001-B301 V23079-G2002-B301 V23079-G2006-B301 V23079-G2003-B301 5-1393789-4 1393790-5 5-1393789-5 4-1393789-9 5-1393789-0 5-1393789-3 5-1393789-1 2.25 3.38 3.75 4.50 6.75 9.00 18.00 140 140 140 140 140 140 140 64 145 178 257 578 1029 4114 V23079-H1208-B301 V23079-H1211-B301 V23079-H1201-B301 V23079-H1202-B301 V23079-H1206-B301 V23079-H1203-B301 V23079-H1205-B301 2-1393789-4 8-1393788-4 2-1393789-0 2-1393789-1 2-1393789-3 8-1393788-3 2-1393789-2 -2.25 -3.38 -3.75 -4.50 -9.00 -18.00 70 70 70 70 70 70 128 289 357 514 2057 8228 V23079-J1108-B301 V23079-J1111-B301 V23079-J1101-B301 V23079-J1102-B301 V23079-J1103-B301 V23079-J1105-B301 2-1393789-9 3-1393789-0 2-1393789-5 2-1393789-6 2-1393789-7 2-1393789-8 200 200 200 200 200 45 125 180 405 720 V23079-G2008-X079 V23079-G2001-X071 V23079-G2002-X072 V23079-G2006-X073 V23079-G2003-X074 1422006-5 1422006-1 1422006-2 1422006-3 1422006-4 SMT short pins, non-latching, overmolded 1 coil 3 4 4.5 5 6 9 12 2.25 3.00 3.38 3.75 4.50 6.75 9.00 6.50 8.70 9.80 10.90 13.00 19.60 26.15 SMT short pins, latching, standard 2 coils 3 4.5 5 6 9 12 24 2.25 3.38 3.75 4.50 6.75 9.00 18.00 6.50 9.80 10.90 13.00 19.60 26.15 52.30 SMT short pins, latching, standard 1 coils 3 4.5 5 6 12 24 2.25 3.38 3.75 4.50 9.00 18.00 9.20 13.85 15.33 18.50 37.00 74.00 High Dielectric Version SMT short pins, non-latching, overmolded 1 coil 3 5 6 9 12 2.25 3.75 4.50 6.75 9.00 6.10 10.10 12.10 18.20 24.20 0.30 0.50 0.60 0.90 1.20 Further coil versions are available on request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 9 of 15 AXICOM Telecom-, Signal and RF Relays 108-98002 Rev. F P2 V23079 Relay Contact Data Number of contacts and type 2 changeover contacts Contact assembly Bifurcated contacts Contact material Silver nickel, gold-covered Limiting continuous current at max. ambient temperature 2A Maximum switching current 5A Maximum swichting voltage 220 Vdc 250 Vac Maximum switching capacity 60 W, 62.5 VA Thermoelectric potential < 10 V Minimum switching voltage 100 V Initial contact resistance / measuring condition: 10 mA / 20 mV Electrical endurance at 12 V / 10 mA at 6 V / 100 mA at 60 V / 500 mA at 30 V / 1000 mA at 30 V / 2000 mA < 50 m typ. 5 x 107 operations typ. 1 x 107 operations typ. 5 x 105 operations typ. 1 x 106 operations typ. 2 x 105 operations typ. 108 operations Mechanical endurance UL contact ratings 220 Vdc / 0.24 A - 60 W 125 Vdc / 0.24 A - 30 W 250 Vac / 0.25 A - 62.5 VA 125 Vac / 0.5 A - 62.5 VA 30 Vdc / 2 A - 60 W DC Voltage [Vdc] Max. DC Load Breaking Capacity resistive load DC current [A] All specifications subject to change. Consult Tyco Electronics for latest specifications. 10 of 15 AXICOM Telecom-, Signal and RF Relays 108-98002 Rev. F P2 V23079 Relay Insulation Insulation resistance at 500 Vdc Dielectric test voltage (1 min) between coil and contacts (Relay with 1 coil) between adjacent contact sets between open contacts Surge voltage resistance according to Telcordia TR-NWT-001089 (2 /10 s) between coil and contacts (Relay with 1 coil) between adjacent contact sets between open contacts according to (10/700 s IEC 60950) between coil and contacts (Relay with 1 coil) between adjacent contact sets between open contacts Insulation according to IEC / EN 60950 Clearance Creepage distance Standard Version High dielectric Version 109 > 109 > 1500 Vrms 1000 Vrms 1000 Vrms 1500 Vrms 1500 Vrms 1500 Vrms 2500 V 2500 V 2000 V 2500 V 2500 V 2500 V 2500 V 2500 V 2000 V 2500 V 2500 V 2500 V Basic insulation 1.3 mm 2.5 mm High Frequency Data Capacitance between coil and contacts between adjacent contact sets between open contacts RF Characteristics Isolation at 100 MHz / 900 MHz Insertion loss at 100 MHz / 900 MHz V.S.W.R. at 100 MHz / 900 MHz max. 2 pF max. 1.5 pF max. 1 pF - 39.0 dB / - 20.7 dB - 0.02 dB / - 0.27 dB 1.04 / 1.40 General Data Operate time at Unom typ. / max. Reset time (latching) at Unom , typ. / max. Duration of set / reset pulse (latching) min. Release time without diode in parallel (non-latching), typ. / max. Release time with diode in parallel (non-latching), typ. / max. Bounce time at closing contact, typ. / max. Maximum switching rate without load Ambient temperature Thermal resistance Maximum permissible coil temperature Vibration resistance (function) Shock resistance, half sinus, 11 ms Degree of protection / Environmental protection Needle flame test Mounting position Processing information Weight (mass) Terminal surface Moisture sensitive level (JEDEC J-STD-020B) - SMD types Resistance to soldering heat 3 ms / 4 ms 3 ms / 4 ms 20ms* 2 ms / 4 ms 4 ms / 6 ms 1 ms / 3 ms 50 operations/s -40 C ... +85 C < 125 K/W 125 C 35 G 10 to 1000 Hz 50 G (function) 150 G (damage) immersion cleanable, IP 67 / RT III application time 20 s, no burning < 15s any Ultrasonic cleaning is not recommended max. 2.8 g SnCu 0.7 MSL 3 265 C / 10 s * Duration may be shorter depending on pulse shape, voltage applied and ambiente temperature All data refers to 23 C unless otherwise specified. All specifications subject to change. Consult Tyco Electronics for latest specifications. 11 of 15 AXICOM Telecom-, Signal and RF Relays 108-98002 Rev. F P2 V23079 Relay Recommended Soldering Conditions Soldering conditions according IEC 60058-2-58 and IPC/JEDEC J-STD-020B 20 - 40 sec Temperature C 240 C Full line: typical Dotted line: process limits 180 C 130 C forced cooling 100 C Time (s) Vapor Phase Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature) Temperature C Recommended reflow soldering profile Time (s) Infrared Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature) Temperature C Resistance to soldering heat - Reflow profile Time (s) Infrared Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature) All specifications subject to change. Consult Tyco Electronics for latest specifications. 12 of 15 AXICOM Telecom-, Signal and RF Relays 108-98002 Rev. F P2 V23079 Relay Packing Dimensions in mm 10.5 0.3 Tube for THT version 50 relays per tube 2`000 relays per box Tape and reel for SMT version with long terminals 400 relays per reel 2`000 relays per box 15.5 10.5 0.3 16 9 12 Tape and reel for SMT version with short terminals 500 relays per reel 2`500 relays per box Reel dimension All specifications subject to change. Consult Tyco Electronics for latest specifications. 13 of 15 AXICOM Telecom-, Signal and RF Relays 108-98002 Rev. F P2 V23079 Relay IM Relays D2n Relays 4th generation slim line - low profile polarized 2 c/o telecom signal relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 1.5 ... 24 V, coil power consumption of 50 ... 200 mW, latching relays with 1 coil 100 mW. The IM relay is available as through hole and surface mount type (J-Legs and Gull Wings) and capable to switch loads up to 60 W/62,5 VA. It is currently the only 2 A rated 4G relay on the market. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The IM relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 10 x 6 mm board space and 5.65 mm height. 2nd generation non polarized 2 c/o relay for telecom and various other applications. Nominal voltage range from 3 ... 48 V, coil power consumption from 150 .... 500 mW. The D2n relay is capable to switch currents up to 3 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 20 x10 mm board space and 11 mm height. P2 Relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 140 mW, latching relays with 1 coil 70 mW. The P2 Relay is available as through hole or surface mount type and capable to switch currents up to 5 A. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The P2 relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10 mm height. FX2 Relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW. The FX2 relay is available as through hole type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The FX2 relay is tested according CECC/ IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height. FT2 / FU2 Relays P1 Relays Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a wide range of applications, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as through hole or surface mount type and capable to switch currents up to 1 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for SMT version. W11 Relays Low cost, non polarized 1 c/o relay for various applications. Nominal voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive versions 200 mW. The W11 relay is capable to switch currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height. Reed Relays High sensitive, non polarized relay for telecom and various other applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal voltage range from 5 ... 24 V, coil power consumption 50...280 mW for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or SIL housing and capable to switch currents up to 0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm height for SIL version. Cradle Relays 3rd generation non polarized, non latching 2 c/o telecom relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as through hole and surface mount type. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The FT2/FU2 relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10 mm height. Extremely reliable and mature relay family of 1st generation for various signal switching applications. Available as non polarized, polarized / latching and relay with AC coil. The benefit is the possibility of combining various contact sets from 1 up to 6 poles, single and bifurcated contacts, different contact materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust protected and hermetically sealed versions, with plug in or solder terminals and are capable to switch currents up to 5 A. Forcibly guided (linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from approx. 19 x 24 to 19x35 mm board space and 30 mm height. FP2 Relays Other Relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW.. The FP2 Relay is available as through hole type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV - 10 / 160 s). The FP2 is tested according CECC/IECQ approved. Dimensions approx. 14 x 9 mm board space and 5 mm height. We offer a variety of different relay families for maintenance and replacement purposes. These relays are up to 60 years old now, such as Card Relay SN (V23030 series), Small General Purpose Relay (V23006 series), Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series). Accessories like sockets, hold down springs, etc. optional. MT2 2nd generation non polarized, non latching 2 c/o telecom and signal relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power consumption 150/200/300/400 and 550 mW. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 20 x 10 mm board space and 11 mm height. High Frequency Relays HF3 / HF3S / HF6 series RF relays offering excellent RF characteristics in a small package. All HF series relays are suitable for SMD soldering processes. Available as non latching or latching versions with 1 or 2 coils and a nominal coil voltage range from 3 ... 24 V, a coil power consumption of 140 mW or 70 mW (single coil latching types). HF3: Low cost RF relay suitable up to 3 GHz. Impedance 50 and 75 Ohm. 50 W hot switching and 50 W RF power carry capability. Dimensions 14.6 x 7.3 x 10.3 mm. HF3S: High performance, high power RF relay suitable up to 3 GHz, 50 W hot switching and 150 W RF power carry capability. Dimensions 15 x 7.6 x 10.6 mm. HF6: High performance, high power RF relay suitable up to 6 GHz, 50 W hot switching and 50 W RF power carry capability. Dimensions 15 x 7.6 x 10.6 mm. All specifications subject to change. Consult Tyco Electronics for latest specifications. 14 of 15 Tyco Electronics Logistics AG Werk Axicom Au Seestrasse 295 CH-8804 Au-Wadenswil / Switzerland Phone +41 44 782 91 11 Fax +41 44 782 90 00 E-mail: axicom@tycoelectronics.com Tyco Electronics Paulsternstrasse 26 D-13629 Berlin / Germany Phone +49 30 386 38573 Fax +49 30 386 38575 E-mail: axicom@tycoelectronics.com Tyco Electronics EC Trutnov s.r.o. Komenskeho 821 CZ-541 01 Trutnov / Czech Republic E-mail: axicom@tycoelectronics.com AXICOM Telecom-, Signal and RF Relays Tyco Electronics Corporation POB 3608, Harrisburg, PA 17105, USA Phone +1 800-522-6752