EVERLIGHT ELECTRONICS CO.,LTD. Device Number : CDLE-033-869 REV.: 1 Page: 1/4 5.0mm Round Type LED Lamps PART NO. : 333HRC-6/T2 ECN : Features : Choice of various viewing angles Available on tape and reel. Reliable and robust Package Dimensions: Descriptions : The series is specially designed for applications requiring higher brightness The led lamps are available with different colors, intensities, epoxy colors, etc. Applications : TV set Monitor Telephone Computer PART NO. 333HRC-6/T2 Notes : 1. All dimensions are in millimeters. 2. An epoxy meniscus may extend about 1.5mm(0.059'') down to the lead. 3. Tolerances unless Dimension 0.25mm. Chip Material Emitted Color GaAlAs Super Red Lens Color Water Clear Office : 7C Building, Lian Hua Port Industrial District, Lian Hua Shan Bonded Pricessing Zone Pan Yu, Guang Zhou, China TEL. : (020)84860913,84860914 FAX : (020)84860600 http : //www.everlight.com T01903,C905606895 EVERLIGHT ELECTRONICS CO.,LTD. Device Number : CDLE-033-869 REV.: ECN : Page: 1 5.0mm Round Type LED Lamps PART NO. : 333HRC-6/T2 2/4 Absolute Maximum Ratings at Ta = 25 Parameter Symbol Rating Unit Forward Current IF 40 mA Operating Temperature Topr -40 to +85 Storage Temperature Tstg -40 to +100 Soldering Temperature Tsol 260 5 Power Dissipation Pd 110 mW Peak Forward Current(Duty 1/10 @ 1KHZ) IF(Peak) 180 mA Reverse Voltage VR 5 V Electronic Optical Characteristics : Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 1.00 mcd IF= Viewing Angle 21/2 20 deg IF= 20 mA Peak Wavelength p 660 nm IF= 20 mA Dominant Wavelength d 643 nm IF= 20 mA Spectrum Radiation Bandwidth 20 nm IF= 20 mA Forward Voltage VF 1.50 1.70 2.40 V IF= 20 mA Reverse Current IR 10 2 mA A VR= 5 V EVERLIGHT ELECTRONICS CO.,LTD. Device Number : CDLE-033-869 REV.: 1 5.0mm Round Type LED Lamps PART NO. : 333HRC-6/T2 ECN : Typical Electro-Optical Characteristic Curves: Page: 3/4 EVERLIGHT ELECTRONICS CO.,LTD. CDLE-033-869 Device Number : REV.: 1 Page: 4/4 5.0mm Round Type LED Lamps PART NO. : 333HRC-6/T2 ECN : Reliability test items and conditions: NO Item Test Conditions 1 Solder Heat TEMP : 260 5 H : +85 30min 5 min L : -55 30min H : +100 5min 10 sec L : -10 5min Test Sample Ac/Re Hours/Cycle Size 5 SEC 76 PCS 0/1 50 CYCLES 76 PCS 0/1 50 CYCLES 76 PCS 0/1 2 Temperature Cycle 3 Thermal Shock 4 High Temperature Storage TEMP : 100 1000 HRS 76 PCS 0/1 5 Low Temperature Storage TEMP : -55 1000 HRS 76 PCS 0/1 6 DC Operating Life 1000 HRS 76 PCS 0/1 1000 HRS 76 PCS 0/1 TEMP : 25 IF = 20 mA 7 High Temperature / High Humidity 85 / 85% RH