Pl tronics,. Inc. 19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA Manufacturer of High Quality Frequency Control Products SM13T, SM13TS Crystal 4 Pad 7x5mm Surface Mount Crystal (Metal Cover Seam Sealed to Ceramic Base) SM13TS Specifically Designed for High Shock Applications 6.001 MHz - 80.000 MHz Solder Pad Compatible with our SM13H Standard Specifications Calibration Frequency Tolerance at 25 C Operating Temperature Range (OTR) Frequency Stability (FS) over OTR Drive Level Aging at 25C Mechanical Shock SM13TS Only Drop Test 50 PPM is standard, tighter tolerances available 0 to +70C is standard, but can be extended to -40 to +85C 50 PPM is standard, tighter tolerances available 100 mW is standard, customer may specify 3 PPM maximum 5000 g's, 1/2 sine, 0.2 mS 2 meter free fall onto a concrete floor, 10 times Part Numbering Guide ESR Values Portions of the part number that appear after the frequency may not be marked on part (C of C provided) SM13TS B E - xx - 70.0M - XXX (Internal Code or blank) Model SM13T: Standard SM13TS: High Shock Oscillation Mode Fundamental AT Cut Frequency in MHz Cal Tol / Freq Stability Blank = 50/50 A = 30/50 B = 30/30 C = 15/30 D = 10/20 (consult factory) Load Capacitance Parallel Resonance in pF ( 10 pF) SR = Series Resonance 3rd Overtone AT Cut Temperature Range Blank: 0 to +70C E: - 40 to +85C H: - 20 to +70C Frequency Range (MHz) - - - - Maximum ESR (Ohms) 8.000 9.000 11.000 50.000 150 80 40 30 26.000 - 80.000 80 6.001 8.001 9.001 11.001 Consult factory for lower ESR Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned. Mechanical: inches (mm) Solder Pads not to scale Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code. Packaging 16mm tape 12mm pitch .043 (1.1) .100 (2.54) PLE .161 (4.1) PLE .276 (7.0 .2) CASE .079 (2.0) CASE .197 (5.0 .2) .051 (1.3) MAX Recommend connecting Case pads to GND .055 (1.4) Feb 2005 Pl tronics, Inc. (425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com 33