MPSA55 / MMBTA55 / PZTA55
PNP General Purpose Amplifier
This device is designed for general purpose amplifier applications
at collector currents to 300 mA. Sourced from Process 73. See
MPSA56 for characteristics.
Absolute Maximum Ratings* TA = 25°C unless otherwise noted
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES:
1) These ratings are based on a maximum junction temperature of 150 degrees C.
2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
Symbol Parameter Value Units
VCES Collector-Emitter Voltage 60 V
VCBO Collector-Base Voltage 60 V
VEBO Emitter-Base Voltage 4.0 V
ICCollector Current - Contin uous 500 mA
TJ, Tstg Operating a nd Storage Junction Temperat ure Range -55 t o + 150 °C
Thermal Characteristics TA = 25°C unless otherwise noted
Symbol Characteristic Max Units
MPSA55 *MMBTA55 **PZTA55
PDTotal Device Dissipation
Derat e above 25°C625
5.0 350
2.8 1,000
8.0 mW
mW/°C
RθJC Thermal Resistance, Junction to Case 83.3 °C/W
RθJA Thermal Resistance, Junction to Ambient 200 357 125 °C/W
*Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06."
**Device mounted on FR-4 PCB 36 mm X 18 mm X 1.5 mm; mounting pad for the collector lead min. 6 cm2.
MPSA55
C
BE
TO-92
MMBTA55
C
B
E
SOT-23
Mark: 2H
PZTA55
B
C
C
SOT-223
E
ã 1997 Fairchild Semiconductor Corporation MPSA55/MMBTA55/PZTA55, Rev A
MPSA55 / MMBTA55 / PZTA55
Electrical Characteristics TA = 25°C unless otherwise noted
OFF CHARACTERISTICS
Symbol Parameter Test Conditions Min Max Units
V(BR)CEO Collector-Em itter Breakdown
Voltage* IC = 1.0 mA , IB = 0 60 V
V(BR)CBO Collector-Base Breakdo wn V oltage IC = 100 µA, IE = 0 60 V
V(BR)EBO Emitter-Base Breakdown Voltage IE = 100 µA, IC = 0 4.0 V
ICEO Collecto r-Cu to ff Cu rren t VCE = 60 V, IB = 0 0.1 µA
ICBO Collecto r-Cu to ff Cu rren t VCB = 60 V, IE = 0 0.1 µA
ON CHARACTERISTICS
hFE DC Current Gain IC = 10 mA, VCE = 1.0 V
IC = 100 mA, VCE = 1.0 V 100
100
VCE(sat)Collector-Emitter Saturation Voltage IC = 100 mA, I B = 10 mA 0.25 V
VBE(on)Base-Emitter On Vo ltage IC = 100 mA, VCE = 1.0 V 1.2 V
SMALL SIGNAL CHARACTERISTICS
fTCurrent Gain - Band wid th Product IC = 100 mA, VCE = 1.0 V,
f = 100 MHz 50 MHz
*Pulse Test: Pulse Width £ 300 ms, Duty Cycle £ 2.0%
PNP General Purpose Amplifier
(continued)
FKS Label
237m m x 167mm x 96mm
Bulk Inner box(10,000cap)
1,000 units per
Bulk Vinyl bag
10 Vinyl bags per
Inner box 525m m x 360mm x 265mm
Outer box(100,000cap)
FKS Label
525m m x 360mm x 265mm
Outer box(100,000cap)
FKS Label
TO-92 B ulk Packing
Configuration: Figure 4.0
TO-92 Tape and Reel Data
©2001 Fairchild Semiconductor Corporation October 2001, Rev. A
TO-92 Packaging
Configuration: Figu re 1.0
FKS Label
1 Reel per
Inner box
395mm x 375mm x 56mm
Inner box(2,000cap)
395mm x 375mm x 56mm
Inner box(2,000cap)
Packaging Description:
TO-92 parts are shipped normally in tape. These reeled
parts in standard option are shipped with 2,000 units per
14” or 355.6cm diameter reel . This and some other options
are further described in the Packaging Information
table.These full reels are individually barcode labeled and
placed inside a standard intermediate box (illustrated in
figure 1.0) made of recyclable corrugated brown paper.
One box contains one reel maximum. And these boxes
are placed inside a barcode labeled shipping box which
comes in different sizes depending on the number of parts
shipped.
01
FKS Label
525mm x 360m x 265m m
Outer box (30,000cap)
420mm x 420mm x 320mm
Outer box(10,000cap)
FKS Label
FKS Label
DVC: KA7812-AE
LOT: IMSYS777
Q’TY: 12000
Outer Box Ba r Code Label Sample
IM 01
A710103105 88706892 7103
DVC: KA7812-AE
LOT: IMSYS777
12000 IM 01
00 / 03 / 17
07:30
DVC:
LOT: Q’TY:
Inner Box Bar Code Label Sample
DVC: KA7812-AE
OPTION:
TKLEE777 1000
00 / 03 / 17
06:30
W/W:0103
01
20000025
MBB : N OR P/U : 6 60
S/T : LOGO I/B: LOGO
HIC : 0 P/T:O M IX: X P
ETC:
Note/Comments
Packaging Option
TO-92 Packaging Inf orm ation
Standard
(no flow code)
Packaging type TNR
Qty per Reel/Tube/ Bag 2,000
Inner Box Dimension (mm) 395x375x56
Max qty per Box 2,000
Weight per unit (gm) 0.2080
Outer Box Dimension (mm) 420x420x320
Max qty per Box 10,000
Standard
(no flow code)
AMMO
328x162x43
2,000
0.2080
525x360x265
30,000
Standard
(no flow code)
BULK
1,000
237x167x96
10,000
0.2080
525x360x265
100,000
Reel Size 14” Dia - -
TO-92 Packaging
Configuration: Figure 2.0
TO- 92 AMM O Packag i ng
Configuration: Figure 3.0
15 Ammo boxes per
Outer Box
328m m x 162mm x 4 3m m
Inner box (2,000cap)
FKS Label
328m m x 162mm x 4 3m m
Inner box (2,000cap)
FKS Label
TO-92 Tape and Reel Data, continued
October 2001, Rev. A
TO-92 Reeling Sty le
Configuration: Figure 5.0
Standard Machine Option
FIRST WIRE OFF IS EMITTER
ADHESIVE TAPE IS ON THE TOP SIDE
FLAT OF TRANSISTOR IS ON BOT TOM
FIRST WIRE OFF I S COL L E CTOR
ADHESI VE T APE IS ON BOT TOM SI D E
FLAT OF TRANSISTOR IS ON TOP
FIRST WIRE OFF IS EMITTER
ADHESIVE TAPE IS ON THE TOP SIDE
FLAT OF TRANSISTOR IS ON BOT TOM
FIRST WIRE OFF I S COL L E CTOR
ADHESI VE T APE IS ON BOT TOM SI D E
FLAT OF TRANSISTOR IS ON TOP
FIRST WIRE OFF I S COL L E CTOR
ADHESIVE TAPE IS ON THE TOP SIDE
FLAT OF TRANSISTOR IS ON TOP
FIRST WIRE OFF IS EMITTER
ADHESI VE T APE IS ON BOT TOM SI D E
FLAT OF TRANSISTOR IS ON BOT TOM
FIRST WIRE OFF I S COL L E CTOR
ADHESIVE TAPE IS ON THE TOP SIDE
FLAT OF TRANSISTOR IS ON TOP
FIRST WIRE OFF IS EMITTER
ADHESI VE T APE IS ON BOT TOM SI D E
FLAT OF TRANSISTOR IS ON BOT TOM
TO-92 Radial Ammo Packaging
Configuration: Figure 6 .0
Standard Machine Option
TO-92 Tape and Reel Data, continued
October 2001, Rev. A
TO-92 Tape and Reel Taping
Dimension Confi guration : Figure 7.0
H1
HHO
PO
P2
P1 F1
DO
P
d
J1 WO W1
W
t
T
W2
User Direction of FeedUser Direction of Feed
A
A1
F2
jh
TO-92 Reel
Configuration: Figure 8.0
SENSITIVE DEVICES
ELECTROSTATIC
SENSITIVE DEVICES
ELECTROSTATIC
D1
FKS Label
W2
W1 W3
D4
D2
ITEM DESCRIPTION
Body Width
Body Height
Body Th i ckness
Lead- Wire Di a meter
Pitch of Component
Feed Hol e Pitch
Hole Center to Compon ent Center
Lead to L ead Distan ce
Component Alignment F-R
Tape Width
Hole-Down Tape Width
Hole Position
Hole-Down Tape Pos ition
Heigh t of Component Fr om Tape Center
Lead-Wire Clinch Height
Component Hei ght
Lead- Wire (T a pe Portion)
Feed Hol e Diame ter
Total Tape Thickne ss
Position of Hol e
SYMBOL
A1
A
T
d
P
P0
P2
F1,F2
jh
W
W0
W1
W2
H
H0
H1
J1
D0
t
P1
DIMENSION
4.58 (+ 0. 25, - 0.15)
4.58 (+/-0.20)
3.86 (max)
0.46 (+/-0.05)
12.7 (+/-0.50)
12.7 (+/ -0.20)
6.35 (+/-0.50)
2.50 (+ 0. 3, - 0.10)
0.00 (+/-1.00)
18.00 (+ 1. 00, - 0.5 0)
6.00 (+/-0.50)
9.00 (+/ -0.50)
1.00 (ma x)
19.50 (+/ - 1.00)
16.00 (+/ - 0.50)
27.0 (max )
2.50 (min)
4.00 (+/-0.20)
0.65 (+/-0.20)
3.85 (+/-0.50)
Note : All dimensions are in millimeters.
REMARK
In Case of Reel
Packag e +/-1.00
F1-F2= +/- 0.30
H + A <= H1
IT EM DESCRIPTI O N SYSMBOL MINI MU M MA XIM UM
Reel Diameter D1 13.975 14.025
Arbor Hole Diameter (Standar d) D2 1.160 1.200
(Small Hole) D2 0.650 0.700
Core Diameter D3 3.100 3.300
Hub Recess Inner Diameter D4 2.700 3.100
Hub Recess Depth W1 0.370 0.570
Flange to Flange Inner Width W2 1. 630 1.690
Hub to Hub Center Width W3 2.090
Note: All dimensions are inches
Dimensions in Millimeters
August 1999, Rev B
TO-92 Package Dimensions
0.46 ±0.10
1.27TYP
(R2.29)
3.86MAX
[1.27 ±0.20]1.27TYP
[1.27 ±0.20]
3.60 ±0.20
14.47 ±0.40
1.02 ±0.10
(0.25) 4.58 ±0.20
4.58 +0.25
–0.15
0.38 +0.10
–0.05
0.38 +0.10
–0.05
TO-92 (FS PKG CODE AM)
Note/Comments
Packaging O ption
SOT-23 Packaging Information
Standard
Packaging type
Reel Size
TNR
7” Dia
Qty pe r Re el/Tube /B ag 3,000
Inner Box Dimension (mm) 188x181x69
Max qty per Box 15,000
Weight per unit (gm) 0.0084
Weight per Reel (kg) -
Outer Box Dimension (mm) 420x420x320
Max qty per Box 180,000
188mm x 181mm x 69mm
Inner box(15,000cap)
5 Reels per box
188mm x 181mm x 69mm
Inner box(15,000cap)
5 Reels per box
SOT-23 Tape and Reel Data
©2001 Fairchild Semiconductor Corporation October 2001, Rev. A
Stat ic Di s s ipati ve
Embossed Carrier Ta pe
FKS Label
Antis tatic Co ver Tape
Stat ic Di s s ipati ve
Embossed Carrier Ta pe
FKS Label
Antis tatic Co ver Tape
SOT-23 Packaging
Configuration: Figure 1.0
Packaging Description:
SOT-23 parts are shipped in tape. The carrier tape is
made from a dissipative (carbon filled) polycarbonate
resin. The cover tape is a multilayer film (Heat Activated
Adhe sive in nature) primar ily comp osed of polye ster f ilm,
adhesive layer, sealant, and anti-static sprayed agent.
These reeled parts in standard option are shipped with
3,000 units per 7” or 17.7cm diameter reel. The reels are
clear in color and is made of polystyr ene plastic (anti-static
coated). This and some other options are further described
in the Packaging Information table. These full reels are
individually barcode labeled and placed inside a standard
intermediate box (illustrated in figure 1.0) made of
recyclable corrugated brown paper. One box contains five
reels maximum. And these boxes are placed inside a
barcode labeled shipping box which comes in different
sizes depending on the number of parts shipped.
SOT-23 Tape Leader and Trailer
Configuration: Fig ure 2.0
DVC: KA7812-AE
LOT: IMSYS777
Q’TY: 12000
Outer Box Barcode Label Sample
IM 01
A710103105 88706892 7103
DVC: KA7812-AE
LOT: IMSYS777
12000 IM 01
00 / 03 / 17
07:30
DVC:
LOT: Q’TY:
Inner Box Barcode Label Sample
DVC: KA7812-AE
OPTION:
TKLEE777 1000
00 / 03 / 17
06:30
W/W:0103 01
20000025
MBB : NOR P/U : 6 6 0
S/T : LOGO I/B: LOGO
HIC : 0 P/T:O MIX: X P
ETC:
420m x 420mm x 320mm
Outer box(180,000cap)
FKS Label
420m x 420mm x 320mm
Outer box(180,000cap)
FKS Label
FKS Label
Components
Cover T ap e
Carrier Tape
Leader Tape
1680mm minimum or
210 empty pockets
Trailer T ape
640mm minimum or
80 empty pockets
SOT-23 Unit Orie ntation
Pin 1
7H 7H 7H 7H
SOT-23 Tape and Reel Data, continued
October 2001, Rev. A
Notes: A0, B0, and K0 dim ensi ons ar e determ ined with respect to t he EIA/Jede c RS-481
rotational and lateral move ment requir ements ( see sketches A, B, and C) .
20 deg ma ximum component rotat ion
0.5mm
maximum
0.5mm
maximum
Sketch C (Top View)
Component lateral movement
Typical
component
cavity
cen ter line
20 deg ma ximum
Typical
component
cen ter line
B0
A0
Sketch B (Top View)
Comp one nt Rotation
Sketch A (Si de or Front Sectional View)
Comp one nt Rotation
User Direction of FeedUser Direction of Feed
SOT-23 Embos se d Carrie r Tape
Configuration: Figure 3.0
P1 A0
D1
FW
E1
E2
Tc
Wc
K0
T
B0
D0P0 P2
P1 A0
D1
FW
E1
E2
Tc
Wc
K0
T
B0
D0P0 P2
See detail AA
Dim A
max
7” Diameter Option
W3
W2 max Measured at Hub
W1 Measured at Hub
Dim N
SOT-23 Reel
Configuration: Figure 4.0
Dim D
min
Dim C
B Min
DETAIL AA
Dim D
min
Dim C
B Min
DETAIL AA
Dimensions are in inches and millimeters
Tape Size Reel
Option Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL)
8.0mm 7” Dia 7.00
177.8 0.059
1.5 0.512 +0.020/-0.008
13 +0.5/-0.2 0.795
20.2 2.165
55 0.331 +0.059/-0.000
8.4 +1.5/0 0.567
14.4 0.311 – 0.429
7.9 – 10.9
Dimensions in Millimeters
August 1999, Rev B
SOT-23 Package Dimensions
0.96~1.14
0.12
0.03~0.10
0.38 REF
0.40 ±0.03
2.90 ±0.10
0.95 ±0.03 0.95 ±0.03
1.90 ±0.03 0.508REF
0.97REF 1.30 ±0.10 0.45~0.60
2.40 ±0.10
+0.05
–0.023
0.20 MIN
0.40 ±0.03
SOT-23 (FS PKG CODE AU)
420mm x 420mm x 320mm
Outer box(64,000cap)
FKS Label
420mm x 420mm x 320mm
Outer box(64,000cap)
FKS Label
FKS LabelFKS Label
SOT-223 Tape and Reel Data
©2001 Fairchild Semiconductor Corporation October 2001, Rev. A
SOT-223 Packaging
Configuration: Figure 1.0
Note/Comments
Packaging Opti on
SOT-223 P ac kaging Information
Standard
Packaging type
Reel Size
TNR
13” Dia
Qty per Reel/Tube/Bag 4,000
Inner Box Dimens ion (mm) 339x352x68
Max qty per Box 16,000
Weight per unit (gm) 0.1118
We ight per Reel(k g) -
Stat ic Di s s ipati ve
Embossed Carrier Ta pe
FKS Label
Antist atic Cover Tape
Stat ic Di s s ipati ve
Embossed Carrier Ta pe
FKS Label
Antist atic Cover Tape
339m m x 352mm x 68mm
Inner box(16,000cap)
Oute r Box Dimensi on (m m) 420x420x320
Max qty per Box 64,000
4 Reels per box
SOT-223 Tape Leader and Trailer
Configuration: Figure 2.0
DVC: KA7812-AE
LOT: IMSYS777
Q’TY: 12000
Outer Box Barcode Label Sample
IM 01
A710103105 88706892 7103
DVC: KA7812-AE
LOT: IMSYS777
12000 IM 01
00 / 03 / 17
07:30
DVC:
LOT: Q’TY:
Inner Box Barcode Label Sample
DVC: KA7812-AE
OPTION:
TKLEE777 1000
00 / 03 / 17
06:30
W/W:0103 01
20000025
MBB : NOR P/U : 660
S/T : LOGO I/B: LOGO
HIC : 0 P/T:O MIX: X P
ETC:
Components
Cover T ap e
Carrier Tape
Leader Tape
1520mm minimum or
190 empty pockets
Trailer T ape
360mm minimum or
45 empty pockets
SOT-223 Unit Or ient ation
Packaging Description:
SOT-223 parts are shipped in tape. The carrier tape is
made from a dissipative (carbon filled) polycarbonate
resin. The cover tape is a multilayer f ilm (Heat A ctivated
Adhesive in nature) primarily composed of polyester film,
adhesive layer, sealant, and anti-static sprayed agent.
These reeled parts in standard option are shipped with
4000 units per 13” or 330cm diameter reel. The reels are
dark blue or black in color and is made of polystyrene
plastic (anti-static coated). This and some other options
are further described in the Packaging Information
table.These full reels are individually barcode labeled and
placed inside a standard intermediate box (illustrated in
figure 1.0) made of recyclable corrugated brown paper.
One box contains four reels maximum. And these boxes
are placed inside a barcode labeled shipping box which
comes in different sizes depending on the number of parts
shipped.
F T0133
FQT13N60
F T0133
FQT13N60 F T0133
FQT13N60
F T0133
FQT13N60 F T0133
FQT13N60
F T0133
FQT13N60 F T0133
FQT13N60
F T0133
FQT13N60
SOT-223 Tape and Reel Data, continued
October 2001, Rev. A
P1
A0 D1
P0
F
W
E1
D0
E2
B0
Tc
Wc
K0
T
Notes: A0, B0, and K0 dimensions are determ ined with respect to the EIA/Jedec RS-481
rotat ional and lateral movement requir ements (see sket ches A, B, and C).
20 de g ma ximum compon ent rot ation
0.5mm
maximum
0.5mm
maximum
Sketch C (Top View)
Component lateral movement
Typical
component
cavity
cen ter line
20 deg max imum
Typical
component
cen ter line
B0
A0
Sketch B (T op View)
Component Rotation
Typical
component
cavity
cen ter line
20 deg max imum
Typical
component
cen ter line
B0
A0
Typical
component
cavity
cen ter line
20 deg max imum
Typical
component
cen ter line
B0
A0
Sketch B (T op View)
Component Rotation
Sketch A (Side or Fr ont Sectional View)
Component Rotation
User Direction of FeedUser Direction of Feed
SOT-223 Embossed Carrier Tape
Configuration: Figure 3.0
0.10
max
9.50
+/-0.1
0.30
+/-0.05
1.80
+/-0.10
4.0
+/-0.1
8.0
+/-0.1
5.50
+/-0.05
10.25
min
1.75
+/-0.10
1.50
+/-0.10
1.55
+/-0.05
12.0
+/-0.2
7.42
+/-0.10
6.83
+/-0.10
SOT-223
(12mm)
TcWcTK0P0P1FE2E1D1D0WB0A0
Pkg type
Dimensions are in millimeter
0.10
max
9.50
+/-0.1
0.30
+/-0.05
1.80
+/-0.10
4.0
+/-0.1
8.0
+/-0.1
5.50
+/-0.05
10.25
min
1.75
+/-0.10
1.50
+/-0.10
1.55
+/-0.05
12.0
+/-0.2
7.42
+/-0.10
6.83
+/-0.10
SOT-223
(12mm)
TcWcTK0P0P1FE2E1D1D0WB0A0
Pkg type
Dimensions are in millimeter
See detail AA
Dim A
max
See detail AA
Dim A
max
13” Dia meter Option
W3
W2 max Measured at Hub
W1 Measured at Hub
Dim N Dim D
min
Dim C
B Min
DETAIL AA
Dim D
min
Dim C
B Min
DETAIL AA
SOT-223 Reel
Configuration: Figure 4.0
Dimensions are in inches and millimeters
Tape S ize Reel
Option Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LS L-USL)
12.0mm 13” Dia 13.00
330 0.059
1.5 0.512 +0.020/-0. 008
13 +0.5/-0.2 0.795
20.2 4.00
100 0.488 +0.078/-0.000
12.4 +2/0 0.724
18.4 0.468 – 0.606
11.9 – 15.4
Dimensions in Millimeters
August 1999, Rev B
SOT-223 Package Dimensions
3.00 ±0.10
7.00 ±0.30
0.65 ±0.20
0.08MAX
3.50 ±0.20
1.60 ±0.20
(0.46)
(0.89)
(0.60) (0.60)
1.75 ±0.20
0.70 ±0.10
4.60 ±0.25
6.50 ±0.20
(0.95) (0.95)
2.30 TYP
0.25
MAX1.80
0°~10°
+0.10
–0.05
0.06 +0.04
–0.02
SOT-223 (FS PKG CODE AV)
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information
Preliminary
No Identification Needed
Obsolete
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Formative or
In Design
First Production
Full Production
Not In Production
OPTOLOGIC™
OPTOPLANAR™
PACMAN™
POP™
Power247™
PowerTrench
QFET™
QS™
QT Optoelectronics™
Quiet Series™
SILENT SWITCHER
FAST
FASTr™
FRFET™
GlobalOptoisolator™
GTO™
HiSeC™
ISOPLANAR™
LittleFET™
MicroFET™
MicroPak™
MICROWIRE™
Rev. H4
ACEx™
Bottomless™
CoolFET™
CROSSVOLT™
DenseTrench™
DOME™
EcoSPARK™
E2CMOSTM
EnSignaTM
FACT™
FACT Quiet Series™
SMART START™
STAR*POWER™
Stealth™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TinyLogic™
TruTranslation™
UHC™
UltraFET
STAR*POWER is used under license
VCX™
