SFML-107-01-F-D - Samtec Inc.

DO NOT

SCALE FROM

THIS PRINT

.120

REF

3.05 .100

REF (TYP)

2.54

.050

REF

1.27 .080 2.03

REF

"C"

REF (TYP)

(SEE NOTE 5

& TABLE 3)

.145

REF

3.68

"A" "A"

"B"

'D'

FIG. 1

THROUGH HOLE/STRAIGHT MODIFIED

(SHOWN: SFML-125-X1-XXX-D)

SFML-1XX-XX-XXX-D-XXX

No OF POSITIONS

-05, -07, -10 THRU -50

(PER ROW)

ROW SPECIFICATION

-D: DOUBLE ROW

(USE SFML-XX-D-X)

LEAD STYLE

-01: THROUGH HOLE

(USE C-44-01-XXX, SEE FIG 1, SHT 1)

-02: SURFACE MOUNT

(USE C-44-02-XXX, SEE FIG 3, SHT 2)

-03: STRAIGHT MODIFIED

(USE C-44-03-XXX, SEE FIG 1, SHT 1)

-L1: THROUGH HOLE (LOW INSERTION)

(USE C-61-01-XXX, SEE FIG 1, SHT 1)

-L2: SURFACE MOUNT (LOW INSERTION)

(USE C-61-02-XXX, SEE FIG 3, SHT 2)

-L3: STRAIGHT MODIFIED (LOW INSERTION)

(USE C-61-03-XXX, SEE FIG 1, SHT 1)

-T1: THROUGH HOLE (PHOS BRONZE)

(USE C-119-01-XXX, SEE FIG 1, SHT 1)

-T2: SURFACE MOUNT (PHOS BRONZE)

(USE C-119-02-XXX, SEE FIG 3, SHT 2)

PLATING SPECIFICATION

-S: SELECTIVE

-P: GOLD FLASHED PALLADIUM

NICKEL

-F: FLASH SELECTIVE GOLD

-H: HEAVY GOLD

-L: LIGHT SELECTIVE GOLD

-STL: SELECTIVE GOLD/ TIN-LEAD

(ONLY AVAILABLE ON -02 AND -L2

LEADSTYLES)

-SM: HEAVY SELECTIVE GOLD, MATTE TIN TAIL

-LM: LIGHT SELECTIVE GOLD, MATTE TIN TAIL

-FM: FLASH SELECTIVE GOLD, MATTE TIN TAIL

(LEAVE BLANK FOR STANDARD

AND USE SFML-XX-D)

-A: ALIGNMENT PIN (USE SFML-XX-D-A)

(SEE FIG 5, SHT 3)

-LC: LOCKING CLIP (SEE FIG 7, SHT 3)

(USE (2) LC-05-TM & SFML-XX-D) (SEE NOTE 9)

-P: PICK & PLACE PAD (SEE FIG 6, SHT 3)

(USE PPP-02) (NOT AVAILABLE IN 5 POS)

-TR: TAPE & REEL PACKAGING

(N/A with -X1 AND -X3 LEAD STYLE,

SEE FIG 2, SHT 1)

-K: POLYIMIDE FILM PAD

(USE K-500-300)(SEE FIG.4, SHT. 2)

-SN: SOLDER NAIL (USE SFML-XX-D-SN &

WT-27-01-T) (SEE FIG 8, SHT 4)

(AVAILABLE ON -X2 LEAD STYLES ONLY)

-SN2: SOLDER NAIL FOR .093 BOARD

(USE SFML-XX-D-SN &

WT-27-02-T) (SEE FIG 8, SHT 4)

(ONLY AVAILABLE WITH -02, L2, AND T2 LEAD

STYLE. NOT AVAILABLE WITH -A, -LC OPTIONS)

OPTIONS

(SEE TABLE 1)

"B" REF

.180 4.57

REF

.110 2.79

REF

(No OF POS x .050 [1.27]) + .015 [.38] REF

(No OF POS x .050 [1.27] + .155 [3.94] REF

.035

REF (TYP)

0.89

(SEE TABLE 1)

"A"

(TYP)

MAX SWAY

(No OF POS x .050 [1.27]) - .050 [1.27]

SECTION "A"-"A"

.050

REF

1.27

SECTION "B"-"B"

.065

REF

1.65

.005

REF

0.13

.050 1.27

(TYP)

MAX TOE

SFML-XX-D

POS. 1

USER DIRECTION OF UNREELING

FIG. 2

-TR: TAPE & REEL PACKAGING

(ALTERNATE KEYING OPTION SHOWN)

SEE NOTE 6

.060 1.52

REF

.020 0.51

REF

DETAIL 'D'

ALTERNATE CONSTRUCTION

SHEET OF

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

DECIMALS ANGLES

.XX:

.01[.3] 2

.XXX:

.005 [.13]

.XXXX:

.0020 [.051]

MATERIAL:

.050 [1.27] x .050 [1.27] LOCKING SOCKET ASSEMBLY

BY:

SFML-1XX-XX-XXX-D-XXX

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

BRATCHER

4/19/99

SHEET SCALE: 2:1

INSULATOR: VECTRA E130i

CONTACT: BeCu

PHOS BRONZE

c:\enterprisevault\DWG\MISC\MKTG\SFML-1XX-XX-XXX-D-XXX-MKT.SLDDRW

NOTES:

1. REPRESENTS A CRITICAL DIMENSION.

2. COPLANARITY: .004 [.10] FOR POS. 10 THRU 26

.006 [.15] FOR POS. 27 THRU 50

3. MINIMUM PUSHOUT FORCE: .5 LB.

4. MAXIMUM ALLOWABLE BOW: .002 INCH/INCH [MM/MM] AFTER ASSEMBLY.

5. POSITIONS -05 AND -07 WILL HAVE ONLY ONE CLIP AT DIMENSION SHOWN AND

WILL NOT HAVE POLARIZATION NOTCH;

POSITIONS -10 THROUGH -24 WILL HAVE ONLY ONE CLIP AT DIMENSION SHOWN;

POSITIONS -25 THROUGH -34 WILL HAVE TWO CLIPS AT DIMENSION SHOWN;

POSITIONS -35- THROUGH -50 WILL HAVE THREE CLIPS: TWO AT DIMENSION

SHOWN & ONE CENTERED ON INSULATOR.

6. SEE NOTCH FOR PROPER ORIENTATION.

7. PINS CAN BE ORIENTED IN ANY DIRECTION; BOTH ROWS MUST FACW SAME WAY.

8. MAXIMUM PIN HEIGHT VARIATION BETWEEN ANY TWO ROWS: .003[.08].

9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION IS NOT

COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL PLACEMENT

FOR ALL ASSEMBLIES WITH THE –LC OPTION."

10. TUBE PARTS WITH NOTCH TOWARD ARROW.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail: info@SAMTEC.com code: 55322

REVISION AB

"M"

"P"

.1575

±.0050

4.000

±0.127

FIG. 4

-K: POLYIMIDE FILM PAD OPTION

(SHOWN: SFML-110-X2-X-D-K)

(ALTERNATE CONSTRUCTION SHOWN)

NOTE:

"M" = USED MEASURED DIMENSION (REF)

"P" = {("M" - .1575 [4.000]) /2}

.020 [.51]

.190 4.83

"C"

(No OF POS x .050 [1.27]) - .050 [1.27]

(TOL ACCUM

.005 [.13] OVER 50 POS.)

(TYP)

MAX SWAY

C-XX-X2-XXX

.185

.005

.002 4.70

0.13

0.05

.165

REF

4.19

SEE NOTE 2

SECTION "C"-"C"

-2

FIG. 3

-X2: SURFACE MOUNT

(SAME AS FIG. 1, UNLESS OTHERWISE STATED)

SHEET OF

BY:

SFML-1XX-XX-XXX-D-XXX

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

BRATCHER

4/19/99

SHEET SCALE: 4:1

REVISION AB

c:\enterprisevault\DWG\MISC\MKTG\SFML-1XX-XX-XXX-D-XXX-MKT.SLDDRW

.050 [1.27] x .050 [1.27] LOCKING SOCKET ASSEMBLY

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail: info@SAMTEC.com code: 55322

(No OF POS x .050 [1.27]) + .125 [3.18] REF

.050

REF

1.27

(No OF POS x .050 [1.27]) + .075 [1.91] REF

FIG. 5

-A: ALIGNMENT PIN OPTION

(SAME AS FIG. 1, UNLESS OTHERWISE STATED)

(ALTERNATE CONSTRUCTION SHOWN)

SFML-XX-D-A

.050

REF

1.27

.056

REF

1.42

.065 1.65

(No OF POS x .050 [1.27]) + .075 [1.91]

FIG. 7

-LC: LOCKING CLIP OPTION

(SAME AS FIG. 1, UNLESS OTHERWISE STATED)

(ALTERNATE CONSTRUCTION SHOWN)

SFML-XX-D

LC-05-TM

.010

REF

0.25

.062 1.57

(SEE TABLE 2)

"A"

.010 [.25]

LOCKING TAB

.394

REF

10.01

PPP-02

FIG. 6

-P: PICK & PLACE PAD OPTION

(SAME AS FIG. 1, UNLESS OTHERWISE STATED)

(ALTERNATE CONSTRUCTION SHOWN)

.225 5.72

REF

PT-1-24-13-09

PT-1-24-14-09

( SEE NOTE 9)

SAMTEC ANTI-STATIC

PT-1-24-15-09

PACKAGE PARTS IN TUBES AS SHOWN

SHEET OF

BY:

SFML-1XX-XX-XXX-D-XXX

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

BRATCHER

4/19/99

SHEET SCALE: 3:1

REVISION AB

c:\enterprisevault\DWG\MISC\MKTG\SFML-1XX-XX-XXX-D-XXX-MKT.SLDDRW

.050 [1.27] x .050 [1.27] LOCKING SOCKET ASSEMBLY

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail: info@SAMTEC.com code: 55322

"B" REF

(No OF POS x .050[1.27]) + .185[4.70] REF

(No OF POS x .050[1.27]) + .085[2.16]

MAX SWAY

(TYP)

"D"

FIG. 8

-SNX: SOLDER NAIL OPTION

(SHOWN: SFML-125-02-XXX-D-SN

(SAME AS FIG. 1, UNLESS OTHERWISE STATED)

(ONLY AVAILABLE ON -X2 LEAD STYLES)

SFML-XX-D-SN

WT-27-XX-T

C10

.026 0.66

REF (2 PLCS)

FLUSH TO .005[0.13] ABOVE

SECTION "D"-"D"

TABLE 3

OPTION

"B"

-SN

.066[1.68]

SN2

.101[1.80]

SHEET OF

.050 [1.27] x .050 [1.27] LOCKING SOCKET ASSEMBLY

BY:

SFML-1XX-XX-XXX-D-XXX

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

BRATCHER

4/19/99

SHEET SCALE: 4:1

REVISION AB

c:\enterprisevault\DWG\MISC\MKTG\SFML-1XX-XX-XXX-D-XXX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail: info@SAMTEC.com code: 55322