LITE-ON SEMICONDUCTOR MBR30100PT REVERSE VOLTAGE - 100 Volts FORWARD CURRENT - 30 Amperes SCHOTTKY BARRIER RECTIFIERS TO-3P FEATURES Metal of silicon rectifier,majority carrier conducton Guard ring for transient protection Low power loss, high efficiency Low leakage current High current capability, low VF High surge capacity Plastic package has UL flammability classification F E A P G Q O K PIN 2 1 B 3 D 94V-0 H C I N MECHANICAL DATA Case : TO-3P molded plastic Polarity : As marked on the body Weight : 0.2 ounces, 5.6 grams Mounting position : Any Max. mounting torque = 0.5 N.m (5.1 Kgf.cm) J L M L PIN 1 PIN 2 CASE PIN 3 DIM. A B C D E F G H I J K L M N O P Q TO-3P MIN. MAX. 15.75 16.25 21.25 21.75 20.10 19.60 3.78 4.38 1.88 2.08 4.87 5.13 4.4TYP. 1.90 2.16 2.93 3.22 1.12 1.22 2.90 3.20 5.20 5.70 2.10 2.40 0.76 0.51 2.18 1.93 20 TYP 10 TYP All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage MBR30100PT UNIT VRRM VRMS VDC 100 70 100 V V I(AV) 30 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load IFSM 250 A Voltage Rate of Change (Rated VR) dv/dt 10000 V/us TJ =25 C TJ =125 C TJ =25 C TJ =125 C VF 0.80 0.67 0.93 0.80 V @TJ =25 C @TJ =125 C IR 100 5 uA mA R0JC 1.4 C/W CJ 300 pF Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (See Fig.1) Maximum Forward Voltage (Note 1) IF=15A @ IF=15A @ IF=30A @ IF=30A @ Maximum DC Reverse Current at Rated DC Blocking Voltage TC =125 C Typical Thermal Resistance (Note 2) Typical Junction Capacitance per element (Note 3) Operating Temperature Range Storage Temperature Range V TJ -65 to +175 C TSTG -65 to +175 C NOTES : 1. 300us Pulse Width, 2% Duty Cycle. 2. Thermal Resistance Junction to Case. 3. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. REV. 2, Oct-2010, KTHD18 RATING AND CHARACTERISTIC CURVES MBR30100PT FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 36 300 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT, AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 30 24 18 12 RESISTIVE OR INDUCTIVE LOAD 6 0 25 75 50 125 100 150 250 200 150 100 50 8.3ms Single Half-Sine-Wave 0 175 5 2 1 CASE TEMPERATURE , 0.01 0.001 TJ =25 0.0001 20 30 40 50 60 70 80 90 100 100 10 1.0 TJ =25 PULSE WIDTH 300us 0.1 0.1 100 110 120 130 0.2 0.3 0.4 FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 100 TJ =25, f=1MHz 10 1 0.5 0.6 0.7 0.8 0.9 INSTANTANEOUS FORWARD VOLTAGE , VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 0.1 50 FIG.4 - TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT , (A) TJ =125 0.1 CAPACITANCE , (pF) INSTANTANEOUS REVERSE CURRENT , (mA) 1.0 10 20 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL REVERSE CHARACTERISTICS 0 10 4 10 REVERSE VOLTAGE , VOLTS 100 1.0 Legal Disclaimer Notice MBR30100PT Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.