Finish:
Lengths:
Travel:
Height:
Load Rating:
Side Space:
Mounting:
Hardware:
Aluminum (RoHS compliant)
16", 20", 24", 28", 32", 36", 40", 44", and
48" [400 mm, 500 mm, 600 mm, 700 mm,
800 mm, 900 mm, 1000 mm, 1100 mm and
1200 mm] ***
3/4 Extension
3.15" [80 mm]
Moderate use: Up to 966 lbs. [438 kg]*
Light use: Up to 1,212 lbs. [550 kg]**
1.42" [36 mm]
Side mount/hard mount
Recommended: 5/16" [8 mm] flat head screws
and/or M8 screws (not included).
Inches
[mm]
* Load rating based on a pair of slides mounted 24" apart and tested to 10,000 cycles. ** Load rating based on a pair of slides mounted 24” apart and tested to 5,000 cycles.
*** The lengths indicated in inches are approximate conversions from the metric measurements. Please see chart above for exact dimensions.
Part Number Slide Length Travel A
AL4120-16 15.75
[400]
11.42
[290]
3 X
AL4120-20 19.69
[500]
14.17
[360]
4 X
AL4120-24 23.62
[600]
16.93
[430]
5 X
AL4120-28 27.56
[700]
19.72
[501]
6 X
AL4120-32 31.50
[800]
22.52
[572]
7 X
AL4120-36 35.43
[900]
25.28
[642]
8 X
AL4120-40 39.37
[1000]
28.07
[713]
9 X
AL4120-44 43.31
[1100]
30.83
[783]
10 X
AL4120-48 47.24
[1200]
35.58
[853]
11 X
Travel + .12" [3] Slide Length
1.97"
[50]
A=3.937 + .004 M8
1.97"
[50] A=3.937 + .004
A=[3.937 +.004
M8 (optional) 0 [.335 (0 .728 x 90°)
1.18"
[30]
3.15"
[80]
1.42"
[36]
Closed Position
MODEL AL4120
Aluminum
3/4 Extension
Up to 1,212-lb. [550 kg] Load Rating**
Slides Sold Individually
Applications: This slide is ideal for extra heavy-duty
applications in environments subject to corrosion.
.98" [25]
Copyright © 2007 Accuride International Inc. 3700-9512(1191)-MK109-R1-0812-WFor the most current technical information please visit www.accuride.com
Specifications
Packaging
Bulk Pack: All lengths are packaged one slide per box.
Packaging includes one slide and a technical sheet.
Fasteners are not included.
Slide Members: Aluminum
Ball Retainers: Stainless Steel
Ball Bearings: Stainless Steel
Aluminum finish is RoHS compliant
NOTE: Specifications, materials, prices, terms, and
delivery are subject to change without notice.
Installation Instructions
Slide Ordering Instructions
Complete your slide order for model AL4120 by
specifying the following information:
1 Slide AL 4120 -16
Total Slides Required
Slide Finish
Slide Model
Slide Length
(Fasteners are not included)
3
1
2
Important: Accuride recommends first pre-drilling all mounting
holes. Align the slide as described below to pre-drill.
1. Position the outer member flush to the cabinet or rack
opening (Figure 1). Mount the slide member to the cabinet or
rack (Figure 2) using 5/16" flat head screws (not included).
The optional mounting method is to use M8 screws in the
tapped holes (Figure 2.1). Be sure slides are parallel.
2. Position the inner member flush to the front of the drawer or
chassis. Mount the inner member using M8 screws. Screws
are inserted through the drawer/chassis and into the inner
member’s threaded holes (Figure 3).
3. Check slide alignment by opening and closing the
drawer/chassis. Any sign of binding indicates an issue with
side space, alignment, or the cabinet and/or drawer are out of
square. To adjust alignment, loosen the screws and adjust the
slide position until movement is smooth. Retighten screws.
4. Add screws to remaining holes. All fixing positions must be
used to achieve maximum load rating. To ensure proper
slide operation, all mounting screws must be inserted so that
the screws do not interfere with slide movement. Use M8 and/
or 5/16 flat head screws.
Note: End stop testing is 10 cycles with a load of 882 lbs. [400 kg]
at 2.62 f/s [.8 m/s]. Accuride recommends additional external
stops be put into place.
2.1
Inner (drawer) member and
ball retainer removed for
clarity
!
5/16"
flat head
screws
Set outer
member flush
to the cabinet
opening
5/16"
flat head
screws
Optional
mounting holes
threaded for
M8 screws
ACCURIDE INTERNATIONAL INC.
12311 Shoemaker Avenue
Santa Fe Springs, CA 90670
TEL (562) 903-0200
FAX (562) 903-0208
www.accuride.com
Manufacturing, Engineering, and Sales
United States • Germany • Japan • Mexico • United Kingdom • China
