Derating-Graph
(Ambient Temperature)
Selection Guide
Part Isolation Input Output Output Capacitive
Number Voltage Voltage Voltage Current Efficiency Load
SMD (kVDC) (VDC) (VDC) (mA) (typ.) (max.) (1)
RO-3.305S/E* 1 3.3 5 200 83% 2200µF
RO-0505S/E* 1 5 5 200 84% 2200µF
RO-1205S/E* 1 12 5 200 84% 2200µF
RO-2405S/E* 1 24 5 200 81% 2200µF
* add Suffix “/H“ for 2kVDC Isolation Voltage - e.g. RO-3.305S/EH
* add Suffix “/P“ for Continuous Short Protection - e.g. RO-3.305S/EHP, RO-3.305S/EP
Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up)
Input Voltage Range ±10%
Output Voltage Accuracy ±5% max.
Line Voltage Regulation low line to high line at full load 1.2% max.
Load Voltage Regulation Load Deviation 10% to 100% 12% typ.
Output Ripple and Noise (20MHz BW) 50mVp-p typ., 100mVp-p max.
Operating Frequency (Vin=nominal input) 20kHz min. / 90kHz max.
Efficiency see Selection Guide
Minimum Load = 0% Specifications valid for 10% minimum load only
Isolation Voltage (tested for 1 second) 1000 VDC
(rated for 1 minute**) 500VAC / 60Hz
Isolation Voltage H-Suffix (tested for 1 second) 2000 VDC
H-Suffix (rated for 1 minute**) 1000VAC / 60Hz
Isolation Capacitance 75pF max.
Isolation Resistance (Viso=500V) 10GΩmin.
Short-Circuit Protection 1 second
Operating Temperature Range -40°C to +100°C
Storage Temperature -55°C to +125°C
Relative Humidity 95% RH
Package Weight 1.4g
MTBF (+25°C) using MIL-HDBK 217F 3459 x 10³ hours
MTBF (+100°C) using MIL-HDBK 217F 756 x 10³ hours
1 Watt SIP4
Single Output
●High Efficiency up to 84%
●Low Deviation (10% ~ 100% Load)
●1kVDC and 2kVDC Isolation Option
●Safety Certified
●-40°C to +100°C Operating Temperature Range
●1W SIP4 Package
Features
Unregulated
Converters
UL-60950-1 Certified
RO/E
ECONOLINE
DC/DC-Converter
Refer to Application Notes
Description The RO/E series is an unregulated DC/DC converter in standard SIP4 package style.
This series has been designed to offer exceptionally high efficiency at low loads, an
extended operating temperature range and low deviation (10% to 100% load).
Uses include applications with restricted energy budget and industrial applications
where a high efficiency level is required.
with 3 year Warranty
RoHS
2011/65/EU
6/6
}
Detailed Information see
Application Notes chapter "MTBF"
**Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our
Application Notes.
Notes
Note 1: Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second
without damage to the converter.
E-358085
REV: 0/2015 E-39www.recom-power.com