STE www.vishay.com Vishay Sprague SuperTan(R) Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES Vishay SuperTan(R) Extended (STE) represents a major breakthrough in wet tantalum capacitor technology. Its unique cathode system, also used in the ST, provides the highest capacitance per unit volume available. The STE combines the inherent reliability of wet tantalum with the capacitance stability of solid tantalum, and there are no circuit impedance restrictions. The range is exceptionally well suited for low voltage filtering and energy storage applications. Ideal for designs targeting the military and aerospace industry. The SuperTan(R) Extended (STE) is housed in an all tantalum, hermetically sealed case and is manufactured to withstand high stress and hazardous environments. * Axial through-hole terminations: Standard tin/lead (Sn/Pb) 100 % tin (RoHS compliant) available * Compliant to RoHS Directive 2002/95/EC Note * Pb containing terminations are not RoHS compliant, exemptions may apply PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to + 85 C (to + 125 C with voltage derating) DC Leakage Current (DCL Max.): At + 25 C and above: Leakage current shall not exceed the values listed in the Standard Ratings Tables. Capacitance Tolerance: At 120 Hz, + 25 C. 20 % standard. 10 % available as special. Life Test: Capacitors are capable of withstanding a 2000 h life test at a temperature of + 85 C at the applicable rated DC working voltage. ORDERING INFORMATION STE 6000 16 T4 M I E3 TYPE CAPACITANCE F DC VOLTAGE RATING AT + 85 C CASE SIZE CAPACITANCE TOLERANCE INSULATING SLEEVE RoHS COMPLIANT M = 20 % K = 10 % I = Insulated X = Uninsulated E3 = 100 % tin termination (RoHS compliant) Blank = SnPb termination (standard design) Note * Packaging: The use of formed plastic trays for packaging this type of axial lead component is standard. Tape and reel is not recommended due to the unit weight. Revision: 29-Jun-11 1 Document Number: 43009 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 STE www.vishay.com Vishay Sprague DIMENSIONS in inches [millimeters] Terminal Welded to Case 0.025 + 0.002 (0.64 + 0.05) 0.250 (6.35) Max. 0.094 (2.38) Max. L1 E Terminal Location within 0.031 of Center "D" Dia. E CASE CODE D 0.016 [0.41] MAX. INSULATED (DIA.) L1 + 0.031 [0.79] UNINSULATED E 0.250 [6.35] MAX. T1 0.188 [4.78] 0.219 [5.56] 0.453 [11.51] 1.500 [38.10] T2 0.281 [7.14] 0.312 [7.92] 0.641 [16.28] 2.250 [57.15] T3 0.375 [9.52] 0.406 [10.31] 0.766 [19.46] 2.250 [57.15] T4 0.375 [9.52] 0.406 [10.31] 1.062 [26.97] 2.250 [57.15] Notes * Material at egress is tantalum * Insulation sleeving will lap over the ends of the capacitor case * Tinned nickel leads, solderable and weldable * Approx. weight: T1: 2.3 g, T2: 5.7 g T3: 9.4 g, T4: 14.8 g STANDARD RATINGS CAPACITANCE CASE VOLTAGE (F) CODE PART NUMBER MAX. CAPACITANCE AC TYP. MAX. DCL AT MAX. MAX. CHANGE AT RIPPLE IMP. AT ESR AT ESR AT 85 C - 55 C + 25 C + 25 C + 85 C/ 40 kHz 120 Hz 1 kHz + 25 C + 125 C - 55 C + 85 C + 125 C 120 Hz mA (A) (%) (%) (%) () () () (A) RMS 10 VDC at + 85 C; 7 VDC at + 125 C 680 10 T1 Preliminary value, contact marketing 2000 10 T2 4700 10 T3 STE4700-10T3MI 0.35 < 0.200 Preliminary value, contact marketing 16 100 - 80 10 20 3.5 4000 10 000 10 T4 STE10000-10T4MI 0.25 < 0.100 25 150 - 85 20 35 3.0 5000 430 16 T1 Preliminary value, contact marketing 1200 16 T2 Preliminary value, contact marketing 3300 16 T3 STE3300-16T3MI 0.35 < 0.200 16 100 - 80 10 15 3.50 4000 6000 16 T4 STE6000-16T4MI 0.30 < 0.150 25 150 - 80 15 20 3.00 4500 20 5.00 4250 25 4.00 2750 16 VDC at + 85 C; 11 VDC at + 125 C 25 VDC at + 85 C; 15 VDC at + 125 C 270 25 T1 Preliminary value, contact marketing 1000 25 T2 Preliminary value, contact marketing 2200 25 T3 Preliminary value, contact marketing 4000 25 T4 STE4000-25T4MI 0.35 < 0.150 25 125 - 80 15 30 VDC at + 85 C; 20 VDC at + 125 C 220 30 T1 Preliminary value, contact marketing Preliminary value, contact marketing 820 30 T2 1800 30 T3 3300 30 T4 180 35 T1 Preliminary value, contact marketing 680 35 T2 Preliminary value, contact marketing 1500 35 T3 Preliminary value, contact marketing 2800 35 T4 Preliminary value, contact marketing Preliminary value, contact marketing STE3300-30T4MI 0.35 < 0.200 25 125 - 80 20 35 VDC at + 85 C; 22 VDC at + 125 C Revision: 29-Jun-11 2 Document Number: 43009 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 STE www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE CASE VOLTAGE (F) CODE PART NUMBER MAX. CAPACITANCE AC TYP. MAX. DCL AT MAX. MAX. CHANGE AT RIPPLE IMP. AT ESR AT ESR AT 85 C - 55 C + 25 C + 25 C + 85 C/ 40 kHz + 25 C 55 C + 85 C + 125 C 120 Hz 120 Hz 1 kHz + 125 C mA (A) (%) (%) (%) () () () (A) RMS 50 VDC at + 85 C; 30 VDC at + 125 C 110 50 T1 Preliminary value, contact marketing 350 50 T2 Preliminary value, contact marketing 900 50 T3 1500 50 T4 STE1500-50T4MI 0.35 < 0.215 Preliminary value, contact marketing 15 110 - 70 20 20 6.00 3500 2200 50 T4 STE2200-50T4MI 0.60 < 0.400 25 125 - 80 25 30 4.50 3000 15 5.50 3500 2000 60 VDC at + 85 C; 40 VDC at + 125 C 68 60 T1 Preliminary value, contact marketing 220 60 T2 Preliminary value, contact marketing 560 60 T3 1000 60 T4 Preliminary value, contact marketing 56 75 T1 180 75 T2 STE180-75T2MI 1.50 < 0.500 5 25 - 35 15 20 30.00 470 75 T3 STE470-75T3MI 0.60 < 0.325 25 100 - 45 10 25 10.00 3000 750 75 T4 STE750-75T4MI 0.50 < 0.400 20 120 - 35 10 15 6.50 3500 27 100 T1 Preliminary value, contact marketing 86 100 T2 Preliminary value, contact marketing 220 100 T3 400 100 T4 12 15.00 3000 12 20.00 2500 STE1000-60T4MI 0.50 < 0.300 20 120 - 40 10 75 VDC at + 85 C; 50 VDC at + 125 C Preliminary value, contact marketing 100 VDC at + 85 C; 65 VDC at + 125 C Preliminary value, contact marketing STE400-100T4MI 0.70 < 0.400 10 120 - 40 6 125 VDC at + 85 C; 85 VDC at + 125 C 18 125 T1 56 125 T2 Preliminary value, contact marketing 150 125 T3 Preliminary value, contact marketing 240 125 T4 Revision: 29-Jun-11 Preliminary value, contact marketing STE240-125T4MI 0.80 < 0.600 15 150 3 - 35 6 Document Number: 43009 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1