FREQUENCY CONTROL PRODUCTS LOW COST CERAMIC SMD VCXO DFV S11-HZ (5 V) & DFV S11-LHZ (3.3 V) L0.2 5 V OR 3.3 V SUPPLY VOLTAGE 5.08 WIDE PULLING RANGE 2.4 5.00.2 LOW PROFILE PACKAGE L H DFV S11 1 2 3 4 5 6 5.08 6 1 2.4 V control Enable or N/C GND Output N/C or Enable Vcc 7.5 mm 1.8 mm 5 2 1.4 4 3 PC board footprint 2.0 Function H0.2 1.4 TYPE DFV S11-HZ DFV S11-LHZ FREQUENCY RANGE 1.6 to 52 MHz 1.6 to 52 MHz 5V5% 35 mA 3.3 V 5 % 25 mA 15 pF 40/60...60/40 % @ 50% level 10 to 90 % : 10 ns 4.5 V/ 0.5 V 15 pF 40/60...60/40 % @ 50% level 10 to 90 % : 10 ns 2.7 V/ 0.4 V high or open = enable, low = high Z high or open = enable, low = high Z 10 ms @ 4.75 V 10 ms @ 3.15 V ELECTRICAL SPECIFICATIONS supply voltage supply current (no load) output load (HCMOS) duty cycle rise/fall times (@ 15 pF load) high/low levels tri-state control (pin 2, pin 5 N/C) start up FREQUENCY STABILITY temperature range Type 0 to 70 DFV S11-HZ -40 to 85C 0 to 70 DFV S11-LHZ -40 to 85C tolerances [ ppm ] model code 80XB30 80XB50 100XB50 100XE50 80XB30 80XB50 100XB50 100XE50 overall stability 30 50 50 50 30 50 50 50 function control voltage 80 2.5 2 V 100 positive 80 1.65 1.35 V 100 input impedance 10 k includes 25C at calibration, temperature, ageing, Vcc and load changes ageing is 1st year at 25C Remarks OPTIONS tight symmetry tri-state control option on pin 5 CODE R Z5 45/55...55/45 % high or open = enable, low = high Z (pin 2 N/C) ORDERING CODE type + option code + frequency + model code Example DFV S11-LHZ 16.384 MHz 80XB30 IMPORTANT NOTE TYPE pulling range DFV S11 THIS PRODUCT IS DESIGNED FOR VOLUME APPLICATION ONLY REVISION 01 CHECKED JYA DATE 24.01.2002 PAGE 27