VF SERIES POWER RELAY 1 POLE--20, 25, 30 A (HEAVY POWER CONTROL) VF SERIES RoHS compliant n FEATURES l UL, CSA, VDE recognized TV-15 rated l 1 Form A (SPST-NO) contact l Heavy duty 20 to 30 A small power relay l High inrush current and high surge voltage --Inrush current 65 A --Surge strength 10,000 V l Printed circuit coil terminals type available l Small package meets high density mounting requirement l RoHS compliant since date code: 0435L2 Please see page 7 for more information n ORDERING INFORMATION [Example] VF (a) B - 6 H U (b) (*) (c) (d) (e) (a) Series Name VF: VF Series Nil: Top *******All tab-terminal B : Top *******Tab-terminal (contacts) : Bottom***PCB-terminal (coil and movable contact) (b) Terminal D : Top *******Tab-terminal (coil) Screw tight terminal (contacts) P : Top *******Screw tight terminal (contacts) : Bottom***PCB terminal (coil and movable contact) (c) Nominal Voltage Refer to the COIL DATA CHARAT (d) Contact Rating H : 30 A M: 25 A L : 20 A (e) U : UL, CSA, VDE rating acquired Standard Note: Actual marking omits hyphen (-) of (*) VF SERIES n SAFETY STANDARD AND FILE NUMBERS UL508, 873 (File No. E56140) C22.2 No. 1, No. 14 (File No. LR35579) VDE 0435 (File No. 11039-4940-1016) Please note that UL/CSA rating may differ from the standard rating. Type Nominal voltage Contact rating TV-15120 VAC VF- ( ) L 3 to 60 VDC1 HP125 VAC/250 VAC 20 A 250 VAC resistive 15A 250 VAC inductive (PF=0.7) TV-15120 VAC VF- ( ) M 3 to 60 VDC1.5 HP250 VAC 25 A 250 VAC resistive VF- ( ) H 3 to 60 VDC TV-15120 VAC 2 HP 250 VAC 30 A 250 VAC resistive 22.5A 250 VAC inductive (PF=0.7) VF SERIES n SPECIFICATIONS 30 A Type Item VFD, VFP- ( ) H Contact Arrangement1 form A (SPST-NO) 25 A Type 20 A Type VF ( ) - ( ) M VF ( ) - ( ) L Material Silver alloy Style Single Resistance (initial) Maximum 30m (at 1 A 6 VDC) Rating Resistive 30 A 250 VAC Motor 2 HP 250 VAC 1.5 HP 250 VAC Maximum Carrying Current 30 A 25 A 20 A Maximum Switching Power 7,500 VA 6,250 VA 5,000 VA Maximum Switching Voltage 250 VAC Maximum Switching Current 30 A 25 A 20 A 20 A 250 VAC 1 HP 250 VAC Minimum Switching Coil Nominal Power (at 20C)1.20 to 1.25 W Operate Power (at 20C)1.59 to 0.62 W Operating Temperature -30C to +65C (no frost) (refer to the CHARACTERISTIC DATA) Time Value Operate (at nominal voltage) Maximum 20 ms Release (at nominal voltage) Maximum 5 ms Insulation Resistance (at 500 VDC) Minimum 1,000 M Dielectric Strength Load*1 25 A 250 VAC 100 mA 5 VDC between open contacts1,200 VAC 1 minute between coil and contacts 4,000 VAC 1 minute Surge Strength10,000 V (at 1.2 x 50 s) Life Mechanical 5 x 106 operations minimum 1 x 105 operations minimum (resistive load) Electrical (at contact rating) 2 x 105 operations minimum (motor load) Other Vibration Resistance Shock Resistance Misoperation 10 to 55 Hz (double amplitude of 1.5 mm) Endurance Misoperation 10 to 55 Hz (double amplitude of 1.5 mm) 200 m/s2 (11 1 ms) Endurance1,000 m/s2 ( 6 1 ms) *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. VF SERIES n COIL DATA CHART MODEL Nominal voltage 30 A Type 25 A Type 20 A Type Coil resistance (10%) Must operate voltage Must release voltage VF (D or P) - 3H VF ( ) - 3M VF ( ) - 3L 3 VDC 7.5 2.1 VDC 0.3 VDC 1.2 W VF (D or P) - 5H VF ( ) - 5M VF ( ) - 5L 5 VDC 20 3.5 VDC 0.5 VDC 1.25 W VF (D or P) - 6H VF ( ) - 6M VF ( ) - 6L 6 VDC 30 4.2 VDC 0.6 VDC 1.2 W VF (D or P) - 9H VF ( ) - 9M VF ( ) - 9L 9 VDC 67 6.3 VDC 0.9 VDC 1.2 W VF (D or P) -12H VF ( ) -12M VF ( ) -12L 12 VDC 120 8.4 VDC 1.2 VDC 1.2 W VF (D or P) -18H VF ( ) -18M VF ( ) -18L 18 VDC 270 12.6 VDC 1.8 VDC 1.2 W VF (D or P) -24H VF ( ) -24M VF ( ) -24L 24 VDC 480 16.8 VDC 2.4 VDC 1.2 W VF (D or P) -48H VF ( ) -48M VF ( ) -48L 48 VDC 1,920 33.6 VDC 4.8 VDC 1.2 W VF (D or P) -60H VF ( ) -60M VF ( ) -60L 60 VDC 3,000 42.0 VDC 6.0 VDC 1.2 W Nominal power Note: All values in the table are measured at 20C n CHARACTERISTIC DATA VF SERIES n REFERENCE DATA n DIMENSIONS l Dimensions l Schematics l PC board mounting hole layout VF type Unit: mm VF SERIES l Dimensions VFB type l Schematics l PC board mounting hole layout VFD type VFP type Unit: mm VF SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l "LF" is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condtion Flow Solder condtion: Pre-heating: Soldering: maximum 120C dip within 5 sec. at 260C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. VF SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: http://www.fujitsu.com/emea/services/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ (c)2005 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. 12/12/2005.