https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Feed-through terminal block, Connection method: Push-in connection, Cross section: 0.14 mm - 4 mm, AWG: 26 - 12, Width: 5.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15 Product Features Angled conductor entry for use in flat terminal boxes Large space saving when used in concealed wiring systems The PTS 2,5, which is equipped with four bridge shafts, offers a wide range of potential bridging options 2, 3, and 4-conductor terminal blocks with the same shape Ground terminal blocks of the same shape are available Key commercial data Packing unit 11 Weight per Piece (excluding packing) 7.6 GRM Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 1 Number of connections 2 Color gray Insulating material PA Inflammability class according to UL 94 V0 Rated surge voltage 8 kV Surge voltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Nominal current IN 24 A 31.10.2013 Page 1 / 21 https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Technical data General Nominal voltage UN 800 V Open side panel ja Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Surge voltage test setpoint 9.8 kV Result of surge voltage test Test passed Power frequency withstand voltage setpoint 2 kV Result of power-frequency withstand voltage test Test passed Checking the mechanical stability of terminal points (5 x conductor connection) Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.14 mm / 0.2 kg 2.5 mm / 0.7 kg 4 mm / 0.9 kg Result of bending test Test passed Conductor cross section tensile test 0.14 mm Tractive force setpoint 10 N Conductor cross section tensile test 2.5 mm Tractive force setpoint 50 N Conductor cross section tensile test 4 mm Tractive force setpoint 60 N Tensile test result Test passed Tight fit on carrier NS 35 Setpoint 1N Result of tight fit test Test passed Requirements, voltage drop 3.2 mV Result of voltage drop test Test passed Temperature-rise test Test passed Conductor cross section short circuit testing 2.5 mm Short-time current 0.3 kA Conductor cross section short circuit testing 4 mm Short-time current 0.48 kA Short circuit stability result Test passed Ageing test for screwless modular terminal block temperature cycles 192 Result of aging test Test passed 31.10.2013 Page 2 / 21 https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Technical data General Proof of thermal characteristics (needle flame) effective duration 30 s Result of thermal test Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 1.857 (m/s ) /Hz Acceleration 0.8 g Test duration per axis 5h Test directions X-, Y- and Z-axis Oscillation, broadband noise test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g Shock duration 30 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Shock test result Test passed Temperature index, insulating material (DIN EN 60216-1 (VDE 0304-21)) 125 C Static insulating material application in cold -60 C 2 2 Dimensions Width 5.2 mm Length 49 mm Height NS 35/7,5 43 mm Height NS 35/15 50.5 mm Connection data Conductor cross section solid min. 0.14 mm Conductor cross section solid max. 4 mm Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 12 Conductor cross section stranded min. 0.14 mm Conductor cross section stranded max. 2.5 mm Min. AWG conductor cross section, stranded 26 Max. AWG conductor cross section, stranded 14 Conductor cross section stranded, with ferrule without plastic sleeve min. 0.14 mm Conductor cross section stranded, with ferrule without plastic sleeve max. 2.5 mm Conductor cross section stranded, with ferrule with plastic sleeve min. 0.14 mm 31.10.2013 Page 3 / 21 https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Technical data Connection data Conductor cross section stranded, with ferrule with plastic sleeve max. 2.5 mm 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm sleeve, max. Connection method Push-in connection Stripping length 10 mm Internal cylindrical gage A3 Classifications eCl@ss eCl@ss 4.0 27141121 eCl@ss 4.1 27141121 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals UL Recognized / VDE Zeichengenehmigung / cUL Recognized / GOST / LR / GL / RS / ABS / NK / IECEE CB Scheme / CSA / BV / GOST / cULus Recognized 31.10.2013 Page 4 / 21 https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Approvals Ex Approvals Approvals submitted Approval details UL Recognized B C mm/AWG/kcmil 26-12 26-12 Nominal current IN 20 A 20 A Nominal voltage UN 600 V 600 V VDE Zeichengenehmigung mm/AWG/kcmil 0.2-4 Nominal current IN 24 A Nominal voltage UN 800 V cUL Recognized B C mm/AWG/kcmil 26-12 26-12 Nominal current IN 20 A 20 A Nominal voltage UN 600 V 600 V GOST LR GL 31.10.2013 Page 5 / 21 https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Approvals RS ABS NK IECEE CB Scheme mm/AWG/kcmil 0.2-4 Nominal current IN 24 A Nominal voltage UN 800 V CSA B C mm/AWG/kcmil 26-12 26-12 Nominal current IN 20 A 20 A Nominal voltage UN 600 V 600 V BV GOST cULus Recognized Accessories Accessories Bridge 31.10.2013 Page 6 / 21 https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Accessories Plug-in bridge - FBS 2-5 - 3030161 Plug-in bridge, Number of positions: 2, Color: red Plug-in bridge - FBS 3-5 - 3030174 Plug-in bridge, Number of positions: 3, Color: red Plug-in bridge - FBS 4-5 - 3030187 Plug-in bridge, Number of positions: 4, Color: red Plug-in bridge - FBS 5-5 - 3030190 Plug-in bridge, Number of positions: 5, Color: red Plug-in bridge - FBS 10-5 - 3030213 Plug-in bridge, Number of positions: 10, Color: red 31.10.2013 Page 7 / 21 https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Accessories Plug-in bridge - FBS 20-5 - 3030226 Plug-in bridge, Number of positions: 20, Color: red Plug-in bridge - FBS 50-5 - 3038930 Plug-in bridge, Number of positions: 50, Color: red Documentation Mounting material - PT-IL - 3208090 Operating decal for the Push-in Technology End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray 31.10.2013 Page 8 / 21 https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Accessories End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray End cover End cover - D-STS 2,5 - 3031762 End cover, Length: 51 mm, Width: 2.2 mm, Height: 43 mm, Color: gray Spacer plate - DP PS-5 - 3036725 Spacer plate, Color: red Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, Color: white 31.10.2013 Page 9 / 21 https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Accessories Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, Color: red Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, Color: blue Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, Color: yellow Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, Color: green Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, Color: gray 31.10.2013 Page 10 / 21 https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Accessories Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, Color: black Insulation stop sleeve - ISH 2,5/0,2 - 3002843 Insulation stop sleeve, Color: white Insulation stop sleeve - ISH 2,5/0,5 - 3002856 Insulation stop sleeve, Color: gray Insulation stop sleeve - ISH 2,5/1,0 - 3002869 Insulation stop sleeve, Color: black Labeled terminal marker Zack marker strip - ZB 5 CUS - 0824962 Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm 31.10.2013 Page 11 / 21 https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Accessories Marker for terminal blocks - UC-TM 5 CUS - 0824581 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm Marker for terminal blocks - UCT-TM 5 CUS - 0829595 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, Lettering field: 4.6 x 10.5 mm Zack Marker strip, flat - ZBF 5 CUS - 0825025 Zack Marker strip, flat, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, For terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm Marker for terminal blocks - UC-TMF 5 CUS - 0824638 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.6 x 5.1 mm Marker for terminal blocks - UCT-TMF 5 CUS - 0829658 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.4 x 4.7 mm Marker carriers 31.10.2013 Page 12 / 21 https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Accessories Marker carriers - STP 5-2-ZB - 3037643 Double marker carrier, snaps onto the spring-cage terminal blocks ST 2.5..., labeled with ZB 5 or ZBF 5 Group marker label for terminal marking - GBS-ZB/26X6 - 0809298 Group marking label, snaps onto terminal center for screw, spring-cage and quick connection terminal blocks, labeled with ESL 26x6 mm or EST 25x6 mm, in the foot part with Zack marker strip, length: 29 mm Mounting rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail 35 mm (NS 35) 31.10.2013 Page 13 / 21 https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Accessories DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail 35 mm (NS 35) DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5 31.10.2013 Page 14 / 21 https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Accessories DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 2000 mm DIN rail - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m DIN rail - NS 35/15 WH PERF 2000MM - 0806602 DIN rail 35 mm (NS 35) DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail 35 mm (NS 35) DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length 2000 mm 31.10.2013 Page 15 / 21 https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Accessories DIN rail - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m DIN rail - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m DIN rail - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15 DIN rail - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m Partition plate 31.10.2013 Page 16 / 21 https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Accessories Partition plate - ATP-QTC - 3206209 Partition plate, Length: 64.4 mm, Width: 2 mm, Height: 46 mm, Color: gray Planning and marking software Software - CLIP-PROJECT ADVANCED - 5146040 Multilingual software for easy planning of Phoenix Contact on DIN rails together with the integrated TRABTECH-select software module for planning comprehensive surge protection concepts. Software - CLIP-PROJECT PROFESSIONAL - 5146053 Multi-lingual software for terminal strip project planning. A marking module allows professional labeling of markers and labels for marking terminal blocks, conductors, cables and devices. The additionally integrated software module TRABTECH-select for planning comprehensive surge protection concepts. Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip Terminal marking 31.10.2013 Page 17 / 21 https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Accessories Group marker label for terminal marking - GBS 5-25X12 - 0810588 Group marker label, snaps onto terminal center for screw, spring-cage and quick connection terminal blocks, labeled with a 25 x 12 mm label or manually with the B-STIFT, in the foot part with ZB 5 Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 5.1 x 10.5 mm Marker for terminal blocks - UC-TM 5 - 0818108 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm Marker for terminal blocks - UCT-TM 5 - 0828734 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 4.6 x 10.5 mm Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642 Zack Marker strip, flat, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat marker groove, For terminal block width: 5 mm, Lettering field: 5.1 x 5.2 mm 31.10.2013 Page 18 / 21 https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Accessories Marker for terminal blocks - UC-TMF 5 - 0818153 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.6 x 5.1 mm Marker for terminal blocks - UCT-TMF 5 - 0828744 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 4.4 x 4.7 mm Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, Color: silver Test adapter - PAI-4-FIX-5/6 BU - 3035975 Test adapter, for 4 mm O safety test plugs, latches into the bridge shaft; color: Blue Test adapter - PAI-4-FIX-5/6 OG - 3035974 Test adapter, for 4 mm O safety test plugs, latches into the bridge shaft; color: Orange 31.10.2013 Page 19 / 21 https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Accessories Test adapter - PAI-4-FIX-5/6 YE - 3035977 Test adapter, for 4 mm O safety test plugs, latches into the bridge shaft; color: Yellow Test adapter - PAI-4-FIX-5/6 RD - 3035976 Test adapter, for 4 mm O safety test plugs, latches into the bridge shaft; color: Red Test adapter - PAI-4-FIX-5/6 GN - 3035978 Test adapter, for 4 mm O safety test plugs, latches into the bridge shaft; color: Green Test adapter - PAI-4-FIX-5/6 BK - 3035980 Test adapter, for 4 mm O safety test plugs, latches into the bridge shaft; color: Black Test adapter - PAI-4-FIX-5/6 GY - 3035982 Test adapter, for 4 mm O safety test plugs, latches into the bridge shaft; color: Gray 31.10.2013 Page 20 / 21 https://www.phoenixcontact.com/us/products/3211799 Feed-through terminal block - PTS 2,5 - 3211799 Accessories Test adapter - PAI-4-FIX-5/6 VT - 3035979 Test adapter, for 4 mm O safety test plugs, latches into the bridge shaft; color: Violet Test adapter - PAI-4-FIX-5/6 BN - 3035981 Test adapter, for 4 mm O safety test plugs, latches into the bridge shaft; color: Brown Test adapter - PS-5 - 3030983 Test adapter, Color: red Test plugs - PS-5/2,3MM RD - 3038723 Test plugs, Color: red Drawings Circuit diagram (c) Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 31.10.2013 Page 21 / 21