© Semiconductor Components Industries, LLC, 2007
August, 2020 − Rev. 2
1Publication Order Number:
ES1J/D
Fast Rectifiers
ES1F-ES1J
Features
•For Surface Mount Applications
•Glass Passivated Junction
•Low Profile Package
•Easy Pick and Place
•Built-in Strain Relief
•Superfast Recovery Times for High Efficiency
ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Symbol Parameter
Value
Unit
ES1F ES1G ES1H ES1J
VRRM Maximum Repetitive
Reverse Voltage
300 400 500 600 V
IF(AV) Average Rectified
Forward Current
1.0 A
IFSM Non-repetitive Peak
Forward Surge Current
8.3 ms Single
Half-Sine-Wave
(JEDEC method)
30 A
TJOperating Junction
Temperature Range
−55 to 150 °C
TSTG Storage Temperature
Range
−55 to 150 °C
PDPower Dissipation 1.47 W
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS
Symbol Characteristics Value Unit
RθJA Thermal Resistance, Junction−to−Ambient (Note 1) 85 °C/W
RθJC Thermal Resistance, Junction−to−Case (Note 1) 61 °C/W
RθJL Thermal Resistance, Junction−to−Lead (Note 1) 35 °C/W
1. P. C. B mounted on 0.2″ × 0.2″ (5 × 5 mm) copper Pad Area.
ELECTRICAL CHARACTERISTICS (TC = 25°C, unless otherwise noted)
Symbol Characteristics
Value
Unit
ES1F ES1G ES1H ES1J
VFMaximum Forward Voltage @ IF = 1.0 A 1.3 1.7 V
Trr Maximum Reverse Recovery Time,
IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A
35 ns
IRMaximum Reverse Current @ rated VR
TA = 25_C
TA = 100_C
5.0
100
mA
CjTypical Junction Capacitance, VR = 4.0 V, f = 1.0 MHz 10.0 8.0 pF
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
SMA (DO−214AC)
Color Band Denotes Cathode
CASE 403AE
www.onsemi.com
Device Package Shipping†
ORDERING INFORMATION
ES1F SMA
(Pb−Free)
7500 /
Tape & Reel
ES1G SMA
(Pb−Free)
7500 /
Tape & Reel
ES1H SMA
(Pb−Free)
7500 /
Tape & Reel
ES1J SMA
(Pb−Free)
7500 /
Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
1
CATHODE
2
ANODE
ES1F−ES1J
www.onsemi.com
2
TYPICAL PERFORMANCE CHARACTERISTICS
0
10
100
1000
1
0.1
0.01
Figure 1. Maximum Forward Current Derating
Curve
Figure 2. Maximum Non-repetitive Peak Forward
Surge Current
Figure 3. Forward Current vs. Forward Voltage Figure 4. Typical Reverse Characteristics
Figure 5. Typical Junction Capacitance
110
0
0.2
0.6
0.8
1.2
1.0
0.4
RESISTIVEOR
INDUCTIVELOAD
0.2 x 0.2″ (5.0 x 5.0 mm)
COPPERPADAREAS
80 90 100 120 130 140 150
Lead Temperature (5C)
Average Forward Current (A)
1 10 100
30
20
10
5
25
15
1
Number of Cycles at 60 Hz
Peak Forward Surge Current (A)
8.3 ms Single Half Sine Wave
(JEDEC Method) at TL = 120°C
0
0.5
1
1.5
2
2.5
0.01 0.1 1 10
IF − Forward Current (A)
VF − Forward Voltage (V)
TA = −55°CT
A = −40°CT
A = 25°C
TA = 85°CT
A = 125°CT
A = 150°C
20 40 60 80 100 140120
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Reverse Current (mA)
TJ = 125°C
TJ = 85°C
TJ = 25°C
1
0
0
10 100
14
10
6.0
4.0
2.0
12
8.0
Tj = 25°C
f = 1.0 MHz
Vsig = 50 mVp−p
Reverse Voltage (V)
Junction Capacitance (pF)
ES1F−G
ES1H−J
SMA
CASE 403AE
ISSUE O
DATE 31 AUG 2016
2.65
4.30
1.75
2.50 MAX
2.20
1.90
0.30
0.05
B0.203
0.050
2.05
1.95
A
C
B1.65
1.20
2.95
2.50
B5.60
4.80
B4.75
4.00
A
B
0.41
0.15
1.52
0.75
R0.15 4X
8
0
0.45
8
0
DETAIL A
SCALE 20 : 1
GAGE PLANE
NOTES:
A. EXCEPT WHERE NOTED, CONFORMS
TO JEDEC DO214 VARIATION AC.
BDOES NOT COMPLY JEDEC STANDARD
VALUE.
C. ALL DIMENSIONS ARE IN MILLIMETERS.
D. DIMENSIONS ARE EXCLUSIVE OF
BURRS, MOLD FLASH AND TIE BAR
PROTRUSIONS.
E. DIMENSIONS AND TOLERANCE AS
PER ASME Y14.5−2009.
E. LAND PATTERN STD. DIOM5025X231M
LAND PATTERN RECOMMENDATION
TOP VIEW
SIDE VIEW
0.13 MCBA
0.13 MCBA
°
°
°
°
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
98AON13440G
DOCUMENT NUMBER:
DESCRIPTION:
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
SMA
© Semiconductor Components Industries, LLC, 2019 www.onsemi.com
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative
◊
