Data sheet SAK Series SAKG 54/35 II Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Product image Klippon(R) Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon(R) Connect provides a proven response to a range of different requirements. General ordering data Type Order No. Version GTIN (EAN) Qty. SAKG 54/35 II 0638120000 SAK Series, Feed-through terminal, Rated crosssection: 240 mm, Screw connection, medium yellow, Direct mounting 4008190068646 5 pc(s). Creation date July 16, 2019 6:47:49 AM CEST Catalogue status 07.06.2019 / We reserve the right to make technical changes. 1 Data sheet SAK Series SAKG 54/35 II Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Width Height Depth Net weight 54 mm 122 mm 60.5 mm 587.6 g Width (inches) Height (inches) Depth (inches) 2.126 inch 4.803 inch 2.382 inch 40 C 10 C...40 C 130 C Storage temperature, min. Continuous operating temp., min. 10 C -60 C Colour medium yellow Tightening torque (clamping screw for copper conductors) Number of levels Number of potentials per tier PE connection 25...60 Nm 1 1 No No 1 Snap-on Installation advice Open sides Direct mounting Open 12400-199 600 V 300 kcmil Current size C (CSA) Wire cross section max. (CSA) 600 A 500 kcmil Clamping range, min. Connection direction Tightening torque, max. Type of connection Wire connection cross section AWG, min. 10 mm on side 60 Nm Screw connection Temperatures Storage temperature, max. Storage temperature Continuous operating temp., max. Environmental Product Compliance REACH SVHC Lead 7439-92-1 Material data Material UL 94 flammability rating KrG V-0, 5VA System specifications Version End cover plate required No. of clamping points per level Levels cross-connected internally Rail Stud terminal Yes 2 No TS 35 Additional technical data Explosion-tested version Number of similar terminals Type of mounting CSA rating data Certificate No. (CSA) Voltage size C (CSA) Wire cross section min. (CSA) Conductors for clamping (rated connection) Clamping range, max. Clamping screw Number of connections Tightening torque, min. Wire connection cross section AWG, max. 240 mm M 16 1 25 Nm kcmil 500 kcmil 300 Creation date July 16, 2019 6:47:49 AM CEST Catalogue status 07.06.2019 / We reserve the right to make technical changes. 2 Data sheet SAK Series SAKG 54/35 II Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Rating data Rated cross-section Rated current Standards Rated impulse withstand voltage 240 mm 415 A IEC 60947-7-1 8 kV Rated voltage Current at maximum wires Volume resistance according to IEC 60947-7-x Pollution severity 1,000 V 415 A 0.08 m 3 UL rating data Certificate No. (UR) Conductor size Factory wiring min. (UR) Conductor size Field wiring min. (UR) Voltage size C (UR) E60693 300 kcmil 300 kcmil 600 V Conductor size Factory wiring max. (UR) 500 kcmil Conductor size Field wiring max. (UR) 500 kcmil Current size C (UR) 380 A EC000897 EC000897 30-21-18-11 27-14-11-20 27-14-11-20 27-14-11-20 ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0 Classifications ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1 EC000897 EC000897 27-14-11-31 27-14-11-20 27-14-11-20 Approvals Approvals ROHS Conform Downloads Approval/Certificate/Document of Conformity Engineering Data Engineering Data User Documentation DE_PT1314_20160418_531_ISSUE01.pdf EPLAN, WSCAD STEP StorageConditionsTerminalBlocks Safety note Safety notice Safety Information Creation date July 16, 2019 6:47:49 AM CEST Catalogue status 07.06.2019 / We reserve the right to make technical changes. 3