Data sheet
Creation date July 16, 2019 6:47:49 AM CEST
Catalogue status 07.06.2019 / We reserve the right to make technical changes. 1
SAK Series
SAKG 54/35 II
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Product image
General ordering data
Type SAKG 54/35 II
Order No. 0638120000
Version SAK Series, Feed-through terminal, Rated cross-
section: 240 mm², Screw connection, medium
yellow, Direct mounting
GTIN (EAN) 4008190068646
Qty. 5 pc(s).
Klippon® Connect with clamping yoke Technology
The high reliability and variety of designs of the terminal
blocks with clamping yoke connections make planning
easer and optimises operational safety. Klippon®
Connect provides a proven response to a range of
different requirements.
Data sheet
SAK Series
SAKG 54/35 II
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date July 16, 2019 6:47:49 AM CEST
Catalogue status 07.06.2019 / We reserve the right to make technical changes. 2
Dimensions and weights
Width 54 mm Width (inches) 2.126 inch
Height 122 mm Height (inches) 4.803 inch
Depth 60.5 mm Depth (inches) 2.382 inch
Net weight 587.6 g
Temperatures
Storage temperature, max. 40 °C Storage temperature, min. 10 °C
Storage temperature 10 °C...40 °C Continuous operating temp., min. -60 °C
Continuous operating temp., max. 130 °C
Environmental Product Compliance
REACH SVHC Lead 7439-92-1
Material data
Material KrG Colour medium yellow
UL 94 flammability rating V-0, 5VA
System specifications
Version
Stud terminal
Tightening torque (clamping screw for
copper conductors) 25...60 Nm
End cover plate required Yes Number of levels 1
No. of clamping points per level 2 Number of potentials per tier 1
Levels cross-connected internally No PE connection No
Rail TS 35
Additional technical data
Explosion-tested version No Installation advice Direct mounting
Number of similar terminals 1 Open sides Open
Type of mounting Snap-on
CSA rating data
Certificate No. (CSA) 12400-199 Current size C (CSA) 600 A
Voltage size C (CSA) 600 V Wire cross section max. (CSA) 500 kcmil
Wire cross section min. (CSA) 300 kcmil
Conductors for clamping (rated connection)
Clamping range, max. 240 mm² Clamping range, min. 10 mm²
Clamping screw M 16 Connection direction on side
Number of connections 1 Tightening torque, max. 60 Nm
Tightening torque, min. 25 Nm Type of connection Screw connection
Wire connection cross section AWG,
max. kcmil 500
Wire connection cross section AWG,
min. kcmil 300
Data sheet
SAK Series
SAKG 54/35 II
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date July 16, 2019 6:47:49 AM CEST
Catalogue status 07.06.2019 / We reserve the right to make technical changes. 3
Rating data
Rated cross-section 240 mm² Rated voltage 1,000 V
Rated current 415 A Current at maximum wires 415 A
Standards
IEC 60947-7-1
Volume resistance according to IEC
60947-7-x 0.08 mΩ
Rated impulse withstand voltage 8 kV Pollution severity 3
UL rating data
Certificate No. (UR) E60693 Conductor size Factory wiring max. (UR) 500 kcmil
Conductor size Factory wiring min. (UR) 300 kcmil Conductor size Field wiring max. (UR) 500 kcmil
Conductor size Field wiring min. (UR) 300 kcmil Current size C (UR) 380 A
Voltage size C (UR) 600 V
Classifications
ETIM 3.0 EC000897 ETIM 4.0 EC000897
ETIM 5.0 EC000897 ETIM 6.0 EC000897
UNSPSC 30-21-18-11 eClass 5.1 27-14-11-31
eClass 6.2 27-14-11-20 eClass 7.1 27-14-11-20
eClass 8.1 27-14-11-20 eClass 9.0 27-14-11-20
eClass 9.1 27-14-11-20
Approvals
Approvals
ROHS Conform
Downloads
Approval/Certificate/Document of
Conformity DE_PT1314_20160418_531_ISSUE01.pdf
Engineering Data EPLAN, WSCAD
Engineering Data STEP
User Documentation StorageConditionsTerminalBlocks
Safety note
Safety notice Safety Information
