Data Sheet Programmable DC Power Supplies XLN Series New Family of High Density System Power Supplies The B&K Precision XLN series are programmable, single-output DC power supplies, that provide clean power up to 1560 watts in a compact 1U rackmountable package. Comparable supplies from other manufacturers primarily address the ATE market only, while the XLN series is designed for both benchtop users and system integrators. Standard USB, RS485, and optional GPIB and LAN interfaces combined with fast average command processing times of less than 50 ms make the XLN series ideal for ATE applications. Free application software and a complete set of LabVIEWTM drivers are available to provide remote control capabilities, reduce programming time, and increase productivity. For benchtop applications, these power supplies offer built-in voltage and current meters displaying setting and output values concurrently, as well as an intuitive user interface with full keypad and rotary knob. Features When greater output power is required, up to four XLN models can be connected in series (high current models only) or parallel and synchronized with the RS485 interface. Alternatively, the RS485 interface can be used to daisy chain up to 30 units and to remotely control them from one master PC via USB, GPIB, or LAN interface. High Current High Voltage XLN Models XLN Models Auxiliary Output 5V/1A Master/Slave Oper. Parallel/Series Parallel Only Display resolution 1 mV/1 mA 10 mV/1 mA Analog programming Analog monitoring - These power supplies are perfectly suited for ATE systems integration, product design and development, product QC and burn-in testing, and other applications requiring excellent regulation, high power, low noise, and a wide range of voltage and current ratings. - Features & Benefits Compact, high density, 1U package USB interface (standard), GPIB and LAN (optional) External analog programming interface List mode: execute test sequences with up to 150 steps from instrument memory Average command processing time <50 ms Programmable voltage and current slew rate allow for "soft starting" of loads Internal memory stores up to 10 instrument settings Control up to 30 power supplies from one PC via the RS485 interface Remote sense Timer-controlled output (1 s to 100 hr) Front to rear airflow allows for efficient cooling in high rack density environments Application software and LabVIEWTM drivers available SCPI-compliant command set Extensive protection features: OVP, OCP, OPP, OTP, foldback protection mode, and key-lock function Easy to configure master/slave mode for series or parallel connection of up to four units High Current High Voltage Specifi cati ons XLN3 640 XLN6 024 XLN8 018 XLN1 00 14 XLN1 50 10 XLN3 00 52 XLN6 00 26 GPIB & LAN version XLN3640-GL XLN6024-GL XLN8018-GL XLN10014-GL XLN15010-GL XLN30052-GL XLN60026-GL Output Voltage 0-36 V 0-60 V 0-80 V 0-100 V 5 -150 V 5 - 300 V 5 - 600 V Output Current 0-40 A 0-24 A 0-18 A 0-14.4 A 0.04-10.4 A 0.02-5.2 A 0.01-2.6 A Output Power 1440 W 1440 W 1440 W 1440 W 1560 W 1560 W 1560 W Technical data subject to change (c) B&K Precision Corp. 2018 www.bkprecision.com Programmable DC Power Supplies XLN Series Interfaces Front panel operation High current models Bright and easy-to-read display Front to back airflow Numeric keypad Rotary encoder High voltage models The numeric keys and rotary knob provide a convenient interface for setting output levels quickly and precisely. Both measured output values and setting values are concurrently displayed on the screen. Additionally, the power supplies provide internal memory for storage of up to 10 different instrument settings that can be set and recalled via both the front panel and remote interfaces. Rear panel configuration High current models Output terminal -GL version includes GPIB & LAN interface Remote sense terminal RS485 interface External analog control input AC line input USB interface Auxiliary 5V/1A output High voltage models -GL version includes GPIB & LAN interface USB interface 2 RS485 interface External analog control interface Output and remote sense terminal AC line input www.bkprecision.com Programmable DC Power Supplies XLN Series Flexible configuration Master/Slave operation Extensive device protection To protect your DUT, the XLN series provides more safety features than any other system power supply in this category: overvoltage (OVP), overcurrent (OCP), overpower (OPP), and overtemperature (OTP) protection. When a fault occurs, the power supply will turn off the output, sound an alarm, and display an error message. Similarly, with constant voltage-to-constant current (CV-to-CC) or constant current-to-constant voltage (CC-to-CV) foldback protection mode activated, the supply will shut down if load changes force the supply to transition between the two operating modes. The power supply is also able to detect abnormally low AC input power and turn the output off when this condition occurs. Power Line RJ-45 + RJ-45 RJ-45 Parallel Configuration Power Line RJ-45 + Current flow timer for breaker or fuse testing The XLN series can be used to accurately measure the time for a fuse or circuit breaker to open. After the voltage and current levels are set, the On/Off button turns on the output and the time when the fuse/breaker opens is measured to the nearest 100 s. The maximum counting period is one hour. RJ-45 RJ-45 Power Line Remote sense Series Configuration (high current models only) The remote sense feature can compensate for voltage drop in the load wiring. Up to four models with the same rating can be connected in parallel or series (high current models only) and operate in master/slave mode. The RS485 interface is used for communication between the master and slave(s). Once configured, the master will automatically search for and detect slave units, and display the voltage and current of the complete system. Convenient front panel guided calibration Using a 5 1/2 digit multimeter and a current shunt, voltage and current parameters can be conveniently calibrated from the front panel via the calibration menu. Fixed 5V/1A output (high current models only) The high current XLN models offer an additional output with a constant output voltage of 5 V and a maximum output current of 1 A for powering another device. Rackmount kit (All models) Ears and Handles Output terminal block connectors (High current models only) Solder Type Terminal Block Screw Type Terminal Block AC input power cord High Current Models High Voltage Models High current models include the XLN3640, XLN6024, XLN8018, and XLN10014. High voltage models include the XLN15010, XLN30052, and XLN60026. 3 www.bkprecision.com Programmable DC Power Supplies XLN Series Remote access and programming System integration Multi-unit control Application software PC software is provided for creating and executing test sequences in list mode via the USB or GPIB interface. These power supplies offer standard USB along with optional GPIB and LAN interfaces to facilitate test system development and integration. The XLN series supports SCPI IEEE488.2 and come with LabVIEWTM drivers. Web server interface XLN series models with GPIB and LAN interfaces provide a built-in web server that allows users to configure, control, or monitor the basic settings of the power supply from a remote computer using a web browser. In multi-unit control mode, up to 30 units can be daisy chained via RS485 and controlled from one master unit through the USB, GPIB, or LAN interface. External analog programming interface Interface for controlling voltage, current, and output state. In addition to front panel or remote interface control, voltage and current values can also be programmed with an analog control signal. The power supplies can be externally controlled from zero to full scale by either an analog voltage source (0-5 V/0-10 V selectable) or resistance (0-5 k, 0-5 k/0-10 k selectable for high voltage models). High voltage models also provide additional functions to the analog programming interface such as the ability to monitor the output voltage and current, check regulation mode (CC or CV), and indicate whether a fault has occurred. Generate, save, and load program lists. View output characteristic curves and export data to a file. Pass/Fail test monitors maximum and minimum voltage and current values over a specified period of time. Telnet interface The power supply can be controlled with SCPI commands via a Telnet connection over the Ethernet interface. Any computer with a Telnet client can be used to control the power supply. 4 Test sequence execution in list mode The list mode feature allows users to download a list of commands to the power supply's internal memory and execute them. Up to 10 sets of programs can be stored with a total of 150 steps allocated among the memory locations. The test sequence can be programmed remotely via the USB, GPIB, or LAN interfaces using SCPI commands or the included application software. Each step's voltage, current, and duration parameters can be set, with sequences configured for single or repeated execution. www.bkprecision.com Programmable DC Power Supplies XLN Series Model XLN3640 XLN6024 XLN8018 XLN10014 XLN15010 XLN30052 XLN60026 Output Rating Output Voltage 0-36 V 0-60 V 0-80 V 0-100 V 5-150 V 5-300 V 5-600 V Output Current 0-40 A 0-24 A 0-18 A 0-14.4 A 0.04-10.4 A 0.02-5.2 A 0.01-2.6 A OVP Adjustment Range 2-38 V 3-64 V 4-85 V 5-105 V 5-158 V 5-315 V 5-630 V OVP Accuracy 200 mV 300 mV 400 mV 500 mV 750 mV 1.5 V 3V Voltage 4 mV 6 mV 8 mV 10 mV 17 mV 32 mV 62 mV Current 4 mA 4 mA 4 mA 4 mA 20.8 mA 10.4 mA 5.2 mA Output Protection Line Regulation Load Regulation Voltage 8 mV 8 mV 10 mV 12 mV 17 mV 32 mV 62 mV Current 8 mA 7 mA 6.5 mA 6 mA 40.4 mA 20.8 mA 10.4 mA Normal Mode Voltage (Load 0.5 % of max load) 5 mVrms / 60 mVpp 6 mVrms / 70 mVpp 7 mVrms / 80 mVpp 8 mVrms / 80 mVpp 10 mVrms / 100 mVpp 25 mVrms / 150 mVpp 50 mVrms / 300 mVpp Normal Mode Current 90 mA 70 mA 50 mA 40 mA 15 mA 10 mA 5 mA 1 mV / 1 mA 1.5 mV / 1 mA 2 mV / 1 mA 2.5 mV / 1 mA Ripple and Noise (20 Hz-20 MHz) Programming Resolution Programming & Readback 10 mV / 1 mA Programming and Readback Accuracy (% output+offset) Voltage 0.05 %+10 mV 0.05 %+15 mV 0.05 %+20 mV 0.05 %+25 mV 0.05 %+75 mV 0.05 %+150 mV 0.05 %+300 mV Current 0.05 %+10 mA 0.05 %+18 mA 0.05 %+7 mA 0.05 %+6 mA 0.1 %+30 mA 0.1 %+15.6 mA 0.1 %+7.8 mA General 50 ms Average Command Response Time Power Factor Correction (PFC) 0.99 (Full load) Efficiency 80 % (Full load) Remote Sense Compensation 2V 5V Rise Time at Full Load 15 ms 20 ms 25 ms 30 ms 100 ms Rise Time at No Load 15 ms 20 ms 25 ms 30 ms 100 ms Fall Time at Full Load 15 ms 20 ms 25 ms 30 ms 100 ms Fall Time at No Load 1000 ms Transient Response Time 1 ms 1000 ms 2000 ms AC Line Rated Input Voltage/Hz 100-240 VAC / 47 Hz-63 Hz Tolerance/Variation in Voltage -15 % to +10 % (10 % power de-rating mode when voltage under 95 VAC) Maximum Rated Input Power Temperature Ratings 1700 VA 1950 VA Operation (0 C - 40 C) / Storage (-10 C - 70 C) Standard Interface USB, RS485, analog interface Optional Interface LAN, GPIB Electromagnetic Compatibility EMC DIRECTIVE 2004/108/EC, EN61326-1 : 2006, CISPR11, Class B, EN 61000-3-2 : 2006, EN 61000-3-3 : 1995 + A1 : 2001 + A2 : 2005, EN 61000-4-2/-3/-4/-5/-6/-11 Safety EN61010-1:2001, EU Low Voltage Directive 2006/95/EC Dimensions (W x H x D) Weight 3000 ms 2 ms 16.5" x 1.72" x 17" (420 x 43.6 x 432 mm) 16.5" x 1.74" x 18.1" (420 x 44.2 x 460 mm) 19.8 lbs. (9 kg) Three-Year Warranty Included Accessories 5 v082218 Power cord, rackmount kit, test report & certificate of calibration, terminal blocks for output connectors (high current models only) www.bkprecision.com