SEMiX904GB126HDs Absolute Maximum Ratings Symbol Conditions Values Unit IGBT VCES IC Tj = 150 C 1200 V Tc = 25 C 821 A Tc = 80 C 572 A 600 A ICnom ICRM SEMiX(R) 4s Trench IGBT Modules SEMiX904GB126HDs VGES tpsc Tj ICRM = 2xICnom VCC = 600 V VGE 20 V VCES 1200 V 1200 A -20 ... 20 V 10 s -40 ... 150 C Tc = 25 C 752 A Tc = 80 C 516 A 600 A Tj = 125 C Inverse diode IF Tj = 150 C IFnom Features * Homogeneous Si * Trench = Trenchgate technology * VCE(sat) with positive temperature coefficient * High short circuit capability * UL recognised file no. E63532 Typical Applications* * AC inverter drives * UPS * Electronic Welding Remarks * Case temperatur limited to TC=125C max. * Not for new design IFRM IFRM = 2xIFnom 1200 A IFSM tp = 10 ms, sin 180, Tj = 25 C 3600 A -40 ... 150 C Tj Module It(RMS) Tterminal = 80 C Tstg Visol AC sinus 50Hz, t = 1 min 600 A -40 ... 125 C 4000 V Characteristics Symbol IGBT VCE(sat) VCE0 rCE Conditions IC = 600 A VGE = 15 V chiplevel VGE = 15 V min. typ. max. Unit Tj = 25 C 1.7 2.1 V Tj = 125 C 2.0 2.45 V Tj = 25 C 1 1.2 V Tj = 125 C 0.9 1.1 V Tj = 25 C 1.2 1.5 m Tj = 125 C VGE(th) VGE=VCE, IC = 24 mA ICES VGE = 0 V VCE = 1200 V Cies Coes Cres VCE = 25 V VGE = 0 V QG VGE = - 8 V...+ 15 V RGint Tj = 25 C VCC = 600 V IC = 600 A VGE = 15 V RG on = 1.6 RG off = 1.6 td(on) tr Eon td(off) tf Eoff Rth(j-c) Tj = 25 C 5 1.8 2.3 m 5.8 6.5 V 0.12 0.36 mA Tj = 125 C mA f = 1 MHz 43.1 nF f = 1 MHz 2.25 nF f = 1 MHz 1.95 nF 4800 nC 1.25 Tj = 125 C 440 ns Tj = 125 C 85 ns Tj = 125 C 60 mJ Tj = 125 C 710 ns Tj = 125 C 130 ns Tj = 125 C 88 mJ per IGBT 0.05 K/W GB (c) by SEMIKRON Rev. 2 - 23.03.2011 1 SEMiX904GB126HDs Characteristics Symbol Conditions Inverse diode VF = VEC IF = 600 A VGE = 0 V chip VF0 rF SEMiX(R) 4s Trench IGBT Modules SEMiX904GB126HDs IRRM Qrr Err Rth(j-c) * Homogeneous Si * Trench = Trenchgate technology * VCE(sat) with positive temperature coefficient * High short circuit capability * UL recognised file no. E63532 Typical Applications* * AC inverter drives * UPS * Electronic Welding Tj = 25 C Tj = 125 C typ. max. Unit 1.6 1.80 V 1.6 1.8 V Tj = 25 C 0.9 1 1.1 V Tj = 125 C 0.7 0.8 0.9 V Tj = 25 C 0.8 1.0 1.2 m 1.3 1.5 m Tj = 125 C IF = 600 A Tj = 125 C di/dtoff = 8400 A/s T = 125 C j VGE = -15 V T j = 125 C VCC = 600 V per diode 1.2 625 A 165 C 75 mJ 0.081 K/W Module LCE RCC'+EE' Features min. res., terminal-chip Rth(c-s) per module Ms to heat sink (M5) 22 nH TC = 25 C 0.7 m TC = 125 C 1 m 0.03 to terminals (M6) Mt K/W 3 5 2.5 5 Nm Nm Nm w 400 g Temperatur Sensor R100 Tc=100C (R25=5 k) B100/125 R(T)=R100exp[B100/125(1/T-1/T100)]; T[K]; 493 5% 3550 2% K Remarks * Case temperatur limited to TC=125C max. * Not for new design GB 2 Rev. 2 - 23.03.2011 (c) by SEMIKRON SEMiX904GB126HDs Fig. 1: Typ. output characteristic, inclusive RCC'+ EE' Fig. 2: Rated current vs. temperature IC = f (TC) Fig. 3: Typ. turn-on /-off energy = f (IC) Fig. 4: Typ. turn-on /-off energy = f (RG) Fig. 5: Typ. transfer characteristic Fig. 6: Typ. gate charge characteristic (c) by SEMIKRON Rev. 2 - 23.03.2011 3 SEMiX904GB126HDs Fig. 7: Typ. switching times vs. IC Fig. 8: Typ. switching times vs. gate resistor RG Fig. 9: Typ. transient thermal impedance Fig. 10: Typ. CAL diode forward charact., incl. RCC'+EE' Fig. 11: Typ. CAL diode peak reverse recovery current Fig. 12: Typ. CAL diode recovery charge 4 Rev. 2 - 23.03.2011 (c) by SEMIKRON SEMiX904GB126HDs SEMiX 4s spring configuration This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX * The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our staff. (c) by SEMIKRON Rev. 2 - 23.03.2011 5