1. Product profile
1.1 General description
Low leakage switching diode, encapsulated in a SOD123F small and flat lead
Surface-Mounted Device (SMD) plastic package.
1.2 Features and benefits
Small and flat lead SMD plastic package
Low leakage current
Excellent coplanarity and improved thermal behavior
AEC-Q101 qualified
1.3 Applications
General-purpose switching
1.4 Quick reference data
[1] Pulse test: tp300 s; 0.02.
[2] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
[3] When switched from IF= 10 mA to IR=10mA; R
L= 100 ; measured at IR=1mA.
2. Pinning information
[1] The marking bar indicates the cathode.
BAS116H
Low leakage switching diode
Rev. 3 — 31 May 2011 Product data sheet
Table 1. Quick reference data
Symbol Parameter Conditions Min Typ Max Unit
IFforward current [1][2] --215mA
IRreverse current VR= 75 V - 0.003 5.0 nA
VRreverse voltage - - 75 V
trr reverse recovery time [3] -0.83.0s
Table 2. Pinning
Pin Description Simplified outline Graphic symbol
1 cathode [1]
2 anode
21
sym001
12
© Nexperia B.V. 2017. All rights reserved
BAS116H All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 3 — 31 May 2011 2 of 10
Nexperia BAS116H
Low leakage switching diode
3. Ordering information
4. Marking
5. Limiting values
[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[2] Pulse test: tp300 s; 0.02.
[3] Tj=25C prior to surge.
[4] Reflow soldering is the only recommended soldering method.
[5] Soldering point of cathode tab.
Tabl e 3. Ordering information
Type number Package
Name Description Version
BAS116H - plastic surface-mounted package; 2 leads SOD123F
Table 4. Marking codes
Type number Marking code
BAS116H B1
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
VRRM repetitive peak reverse
voltage -85V
VRreverse voltage - 75 V
IFforward current [1][2] -215mA
IFRM repetitive peak forward
current -500mA
IFSM non-repetitive peak forward
current square wave [3]
tp=1s-4A
tp=1ms - 1 A
tp=1s - 0.5 A
Ptot total power dissipation Tamb 25 C[1][4]
[5] -375mW
Tjjunction temperature - 150 C
Tamb ambient temperature 65 +150 C
Tstg storage temperature 65 +150 C
© Nexperia B.V. 2017. All rights reserved
BAS116H All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 3 — 31 May 2011 3 of 10
Nexperia BAS116H
Low leakage switching diode
6. Thermal characteristics
[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[2] Reflow soldering is the only recommended soldering method.
[3] Soldering point of cathode tab.
7. Characteristics
[1] Pulse test: tp300 s; 0.02.
[2] When switched from IF= 10 mA to IR=10mA; R
L= 100 ; measured at IR=1mA.
Table 6. Thermal characteristics
Symbol Parameter Conditions Min Typ Max Unit
Rth(j-a) thermal resistance from
junction to ambient in free air [1][2] --330K/W
Rth(j-sp) ther mal resistance from
junction to solder point [3] --70K/W
Table 7. Characteristics
Tamb =25
C unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
VFforward voltage [1]
IF= 1 mA - - 0.90 V
IF=10mA - - 1.00 V
IF=50mA - - 1.10 V
IF= 150 mA - - 1.25 V
IRreverse current VR= 75 V - 0.003 5.0 nA
VR=75V; T
j= 150 C- 3 80.0nA
Cddiode capacitance VR=0V; f=1MHz -2-pF
trr reverse recovery time [2] -0.83.0s
© Nexperia B.V. 2017. All rights reserved
BAS116H All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 3 — 31 May 2011 4 of 10
Nexperia BAS116H
Low leakage switching diode
(1) Tamb = 150 C; typical values
(2) Tamb =25C; typical values
(3) Tamb =25C; maximum values
Based on square wave currents
Tj=25C; prior to surge
Fig 1. Forward current as a function of forward
voltage Fig 2. Non-repetitive p eak forward current as a
function of pulse duration; maximum values
VR=75V
(1) Maximum values
(2) Typical values
Tamb =25C; f = 1 MHz
Fig 3. Reverse current as a function of junction
temperature Fig 4. Diode capacitance as a function of reverse
voltage; typical values
mlb752
300
0
100
200
IF
(mA)
0 1.60.8 1.20.4 VF (V)
(1) (2) (3)
mbg704
10
1
102
IFSM
(A)
10−1
tp (μs)
110
4
103
10 102
102
150 200
500
mlb754
100
10
1
10−1
10−2
10−3
IR
(nA)
Tj (°C)
(1)
(2)
mbg526
01020155 VR (V)
2
0
1
Cd
(pF)
© Nexperia B.V. 2017. All rights reserved
BAS116H All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 3 — 31 May 2011 5 of 10
Nexperia BAS116H
Low leakage switching diode
8. Test information
8.1 Quality information
This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is
suitable for use in auto motive applications.
9. Package outline
10. Packing information
[1] For further information and the availability of packing methods, see Section 14.
(1) IR=1mA
Fig 5. Reverse recovery time test cir cuit and waveforms
trr
(1)
+ IFt
output signal
trtpt
10 %
90 %
VR
input signal
V = VR + IF × RS
RS = 50
Ω
IF
D.U.T.
Ri = 50
Ω
SAMPLING
OSCILLOSCOPE
mga881
Fig 6. Package outline SOD123F
04-11-29Dimensions in mm
1.2
1.0
0.25
0.10
3.6
3.4 2.7
2.5
0.55
0.35
0.70
0.55
1.7
1.5
1
2
Table 8. Packing methods
The -xxx numbers are the last three digits of the 12NC ordering code.[1]
Type number Package Description Packing quantity
3000 10000
BAS116H SOD123F 4 mm pitch, 8 mm tape and reel -115 -135
© Nexperia B.V. 2017. All rights reserved
BAS116H All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 3 — 31 May 2011 6 of 10
Nexperia BAS116H
Low leakage switching diode
11. Soldering
Reflow soldering is the only recommended soldering method.
Fig 7. Reflow soldering foot print SOD123F
Footprint information for reflow soldering of plastic surface-mounted, 2 leads package SOD123F
sod123f_fr
occupied area
solder land
solder resist
solder land plus solder paste
solder paste deposit
2.9
2.8
4.4
1.62.1 1.2
(2×)
1.1
(2×)
1.1
(2×)
1.2
(2×)
Dimensions in mm
© Nexperia B.V. 2017. All rights reserved
BAS116H All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 3 — 31 May 2011 7 of 10
Nexperia BAS116H
Low leakage switching diode
12. Revision history
Table 9. Revision history
Document ID Release date Data sheet status Change notice Supersedes
BAS116H v.3 20110531 Product data sheet - BAS116H v.2
Modifications: •Section 1 “Product profile”: updated.
•Table 5 and 6: updated.
•Table 7: VF values changed from mV to V.
•Figure 2: updated.
•Section 8.1 “Quality information”: added.
•Figure 7: updated.
•Section 13 “Legal information”: updated.
BAS116H v.2 20091214 Product data sheet - BAS116H v.1
BAS116H v.1 20050411 Product data sheet - -
© Nexperia B.V. 2017. All rights reserved
BAS116H All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 3 — 31 May 2011 8 of 10
Nexperia BAS116H
Low leakage switching diode
13. Legal information
13.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device (s) descr ibed in th is document m ay have cha nged since thi s document w as publish ed and may di ffe r in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nexperia.com.
13.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liab ility for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and tit le. A short data sh eet is intended
for quick reference only and shou ld not b e relied u pon to cont ain det ailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, th e
full data sheet shall pre va il.
Product specificat io n — The information and data provided in a Product
data sheet shall define the specification of the product as agr eed between
Nexperia and its customer, unless Nexperia and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the Nexperia product is
deemed to off er functions and qualities beyond those described in the
Product data sheet.
13.3 Disclaimers
Limited warr a nty and liability — Information in this document is believed to
be accurate and reliable. However, Nexperia does not give any
representations or warrant ies, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall Nexperia be liable for any indirect, incidental,
punitive, special or consequ ential damages (including - wit hout limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of Nexperia.
Right to make changes — Nexperia reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all informa tion supplied prior
to the publication hereof .
Suitability for use — Nexperia products are not designed,
authorized or warranted to be suit able for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of a Nexperia product can reasonably be expected
to result in perso nal injury, d eath or severe property or environmental
damage. Nexperia accepts no liability for inclusion and/or use of
Nexperia products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and ope ration of their applications
and products using Nexperia products, and Nexperia
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the Nexperia
product is suitable and fit for the customer’s applications and
products planned, as well as fo r the planned application and use of
customer’s third party customer(s). Custo mers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
Nexperia does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party custo mer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using Nexperia
products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). Nexperia does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Nexperia
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nexperia.com/profile/terms, unless otherwise
agreed in a valid written individua l agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. Nexperia hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of Nexperia products by customer.
No offer to sell or license — Nothing i n this document may be interpreted or
construed as an of fer t o sell product s that is open for accept ance or the gr ant,
conveyance or implication of any license under any copyrights, patents or
other industrial or inte llectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contain s data from the objective specification for product development.
Preliminary [short] dat a sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.
© Nexperia B.V. 2017. All rights reserved
BAS116H All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 3 — 31 May 2011 9 of 10
Nexperia BAS116H
Low leakage switching diode
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
13.4 Trademarks
Notice: All referenced b rands, produc t names, service names and trademarks
are the property of their respective ow ners.
14. Contact information
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Nexperia BAS116H
Low leakage switching diode
15. Contents
1 Product profile. . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features and benefits. . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 Quick reference data . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 1
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2
4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
6 Thermal characteristics . . . . . . . . . . . . . . . . . . 3
7 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 3
8 Test information. . . . . . . . . . . . . . . . . . . . . . . . . 5
8.1 Quality information . . . . . . . . . . . . . . . . . . . . . . 5
9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 5
10 Packing information . . . . . . . . . . . . . . . . . . . . . 5
11 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
12 Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 7
13 Legal information. . . . . . . . . . . . . . . . . . . . . . . . 8
13.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 8
13.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
13.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
13.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
14 Contact information. . . . . . . . . . . . . . . . . . . . . . 9
15 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
© Nexperia B.V. 2017. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release:
31 May 2011
