Ordering number : ENN7490 50A02SP PNP Epitaxial Planar Silicon Transistor 50A02SP Low-Frequency General-Purpose Amplifier Applications Applications * Package Dimensions Low-frequency Amplifier, high-speed switching, small motor drive, muting circuit. unit : mm 2033A [50A02SP] Features 0.4 0.5 15.0 0.6 * Large current capacitance. Low collector-to-emitter saturation voltage (resistance). RCE(sat) typ=210m [IC=0.5A, IB=50mA]. Small ON-resistance (Ron). 3.0 * 1.8 * 2.2 4.0 0.4 0.4 3 0.7 Specifications Symbol 1 : Emitter 2 : Collector 3 : Base 3.0 3.8nom Absolute Maximum Ratings at Ta=25C Parameter 1.3 0.7 1 2 1.3 SANYO : SPA Conditions Ratings Unit Collector-to-Base Voltage VCBO --50 V Collector-to-Emitter Voltage VCEO --50 V Emitter-to-Base Voltage VEBO --5 Collector Current Collector Current (Pulse) Collector Dissipation V IC --500 ICP PC --1.0 A 400 mW Junction Temperature Tj Storage Temperature Tstg mA 150 C --55 to +150 C Electrical Characteristics at Ta=25C Parameter Collector Cutoff Current Symbol ICBO IEBO Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product hFE fT Conditions VCB=--40V, IE=0 VEB=--4V, IC=0 VCE=--2V, IC=--10mA Ratings min typ max 200 VCE=--10V, IC=--50mA --100 nA --100 nA 500 690 Marking : XN Unit MHz Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN O3103 TS IM TA-100639 No.7490-1/4 50A02SP Continued from preceding page. Parameter Symbol Output Capacitance Cob Collector-to-Emitter Saturation Voltage VCE(sat) Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage VBE(sat) V(BR)CBO Collector-to-Emitter Breakdown Voltage V(BR)CEO Emitter-to-Base Breakdown Voltage V(BR)EBO Turn-ON Time Fall Time min typ Unit max VCB=--10V, f=1MHz 3.8 IC=--100mA, IB=--10mA IC=--100mA, IB=--10mA --60 --120 mV --0.9 --1.2 V IC=--10A, IE=0 IC=--1mA, RBE= pF --50 V --50 V --5 V IE=--10A, IC=0 See specified Test Circuit. ton tstg tf Storage Time Ratings Conditions 30 ns See specified Test Circuit. 170 ns See specified Test Circuit. 30 ns Switching Time Test Circuit IB1 PW=20s D.C.1% INPUT OUTPUT IB2 RB VR 50 RL + + 220F 470F VBE=5V VCC= --25V IC=20IB1= --20IB2= --200mA IC -- VCE 10mA -- --5mA --300 --250 --2mA --200 --1mA --150 --500A --100 --500 --400 --300 Ta=75 C 25C --25C --350 VCE= --2V A --15m A --400 IC -- VBE --600 --50m Collector Current, IC -- mA --450 --40 m A A A mA 0m 25m --20 -- 3 -- Collector Current, IC -- mA --500 --200 --200A --100 --50 0 0 IB=0 0 --100 --200 --300 --400 --500 --600 --700 --800 --900 --1000 Collector-to-Emitter Voltage, VCE -- mV Ta=75C 25C --25C DC Current Gain, hFE 3 100 7 5 2 3 5 7 --10 --1.0 --1.2 IT05119 2 --100 2 3 --1.0 --0.8 IC / IB=10 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 7 --0.6 VCE(sat) -- IC 3 VCE= --2V 5 --0.4 Base-to-Emitter Voltage, VBE -- V hFE -- IC 1000 --0.2 0 IT05118 2 3 5 7 --100 Collector Current, IC -- mA 2 3 5 7--1000 IT05120 7 C 75 5 = Ta C 25 3 5 --2 2 --10 --1.0 2 3 5 7 --10 2 3 C 5 7 --100 Collector Current, IC -- mA 2 3 5 7 IT05410 No.7490-2/4 50A02SP VCE(sat) -- IC --1000 5 IC / IB=50 2 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 7 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV VCE(sat) -- IC 3 IC / IB=20 --1000 3 2 --100 7 C 75 Ta= 5C --2 5 3 25C 2 --10 7 --1.0 2 3 5 7 --10 2 3 5 7 --100 2 3 Collector Current, IC -- mA 5 3 2 75C Ta= C --25 --100 7 5 25C 3 2 --10 --1.0 5 7--1000 IT05123 2 3 5 7 --10 2 3 5 7 --100 2 3 Cob -- VCB 10 Ta= --25C 7 75C 25C 5 3 2 --1.0 2 3 5 7 --10 2 3 5 7 --100 2 3 Collector Current, IC -- mA 5 3 2 2 3 5 7 100 7 5 VCE= --10V 7 3 2 5 3 7 --100 IT05122 Ron -- IB 1k f=1MHz OUT IN 1k 3 5 2 --10 Collector-to-Base Voltage, VCB -- V ON Resistance, Ron -- Gain-Bandwidth Product, f T -- MHz 7 1.0 --1.0 5 7--1000 IT05125 f T -- IC 1000 2 IB 10 7 5 3 2 1.0 7 5 3 2 100 --1.0 2 3 5 7 --10 2 3 5 7 --100 2 Collector Current, IC -- mA 3 5 7--1000 IT05121 PC -- Ta 500 Collector Dissipation, PC -- mW f=1MHz Output Capacitance, Cob -- pF Base-to-Emitter Saturation Voltage, VBE(sat) -- V IC / IB=20 --1.0 5 7--1000 IT05124 Collector Current, IC -- mA VBE(sat) -- IC 2 7 0.1 --0.1 2 3 5 7 --1.0 2 Base Current, IB -- mA 3 5 7 --10 IT06093 400 300 200 100 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 IT05048 No.7490-3/4 50A02SP Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of October, 2003. Specifications and information herein are subject to change without notice. PS No.7490-4/4