EXPOSED POWER OVER ETHERNET (PoE) Circuit Conditioning SM51625EL 1CT:1CT 1.2 A Line 1.2 A 0.6 A 0.6 A 0.6 A 0.6 A Product Design Kit SM51625EL TEL-NOTEKIT-2 SM51625EL Tx Rx 1CT:1CT 1.2 A 1.2 A 0.6 A 0.6 A 0.6 A 0.6 A Tx Rx 1CT:1CT 1.2 A Introduction of a high current PoE transformer, enabling higher power applications for outdoor PoE applications 1.2 A 0.6 A 0.6 A 0.6 A 0.6 A Objective Rx Tx 1CT:1CT 1.2 A 0.6 A Solution 1.2 A 0.6 A Rx Tx 0.6 A PSE: Power Sourcing Equipment 0.6 A PD: Powered Device *The Bourns(R) model SM51625EL transformer is built to meet IEEE 802.3 specification, by fitting in the specified limits defined in the Clause 40.8.3 for Medium Dependent Interface (MDI) of the IEEE 802.3-2012, thus helps ensure an application's compliance to IEEE 802.3-2012. High current transformer: * SM51625EL Compliance* IEEE802.3 Features & Benefits This solution enables high power delivery over Ethernet cables without impacting signal integrity The schematic shown here illustrates the conditioning of the application and does not constitute the complete circuit design. Customers should verify actual device performance in their specific applications. For more information, go to: Americas: Tel +1-951 781-5500 Fax +1-951 781-5700 Asia-Pacific: or email: protection@bourns.com EMEA: Tel +36 88 520 390 Fax +36 88 520 211 COPYRIGHT(c) 2016 * BOURNS, INC. * 01/16 * PSG * XX/IC1546 "Bourns" is a registered trademarks of Bourns, Inc. in the U.S. and other countries. www.bourns.com Tel +886-2 256 241 17 Fax +886-2 256 241 16