SPECIFICATION
(Reference sheet)
Suppli e r : Sams ung e lectr o- m e c ha nics Samsung P /N :
Product : Multi- layer Ce ramic Ca pa c itor Description : CAP, 9.1㎊, 25V, ±0.1㎊, C0G, 0201
CL 03 C9R1 B A 3 G N N C
① ②③ ④ ⑤⑥ ⑦ ⑧⑨⑩⑪
①Series Samsung Multi-layer Ceramic Capacitor
②Size 0201 (inch code) L:
0
.60 ± 0.03 mm W: ± 0.03 mm
③Dielectric C0G ⑧Inner e lectr ode
④Capacitance 9.1 ㎊Termination
⑤Capacitance ±0.1 ㎊Plating (Pb Free)
tolerance ⑨Product Normal
⑥Rated Voltage 25 V ⑩Special Reserved for future use
⑦Thickness 0.30 ± 0.03 mm ⑪Packaging Cardboard Type, 7" reel
B. Structure a nd dimensi on
BW
CL03C9R1BA3GNNC 0.60±0.03 0.30±0.03 0.30±0.03 0.15±0.05
CL03C9R1BA3GNNC
A. Sam s ung P a rt Number
Samsung P/N
(Lead Free)
Dimension(㎜)
LWT
Sn 100%
Cu
Cu
0.30
C. Sam s ung Re liability Test and Judgeme nt c ondition
Capacitance Within specified tolerance 1㎒±10% 0.5~5Vrms
Q582 min
Insulation 10,000Mohm or 500Mohm㎌Rated Voltage 60~120 sec.
Resistance Whichever is smaller
Appearance No abnormal exterior appearance Microscope (10)
Withstanding No dielectric breakdown or of the rated voltage
Voltage mechanical breakdown
Temperature C0G
Characteristics (From -55℃ to 125℃, Capacitance change should be within ±30PPM/℃)
Adhesive Strength No peeling shall be occur on the 200gF, for 10±1 sec.
of Termination terminal electrode
Bending St rength Capacitance change : Bending to the limit (1mm)
within ±5% or ±0.5㎊ whichever is larger with 1.0mm/sec.
Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder
is to be soldered newly 245±5℃, 3±0.3sec.
(preheating : 80~120℃ for 10~30sec.)
Resistance to Capacitance change : Solder pot : 270±5℃, 10±1sec.
Soldering heat within ±2.5% or ±0.25㎊ whichever is larger
Tan δ, IR : initial spec.
Vibr a t ion Test Capacitance change : Amplitude : 1.5mm
within ±2.5% or ±0.25㎊ whichever is larger From 10㎐ to 55㎐ (return : 1min.)
Tan δ, IR : initial spec. 2hours 3 direction (x, y, z)
Moisture Capacitance change : With rated voltage
Resistance within ±7.5% or ±0.75㎊ whichever is larger 40±2℃, 90~95%RH, 500+12/-0hrs
Q : 130.33 min
IR : 500Mohm or 25Mohm ㎌
Whichever is smaller
High Tempe rature Capacitance change : With of the rated voltage
Resistance within ±3% or ±0.3㎊ whichever is larger Max. operating temperature
Q : 291 min 1000+48/-0hrs
IR : 1,000Mohm or 50Mohm ㎌
Whichever is smaller
Temperature Capacitance change : 1 cycle condition
Cycling within ±2.5% or ±0.25㎊ whichever is larger Min. operating temperature →25℃
Tan δ, IR : initial spec. →Max. operating temperature →25℃
5 cycle test
※ The reliability test condition can be replaced by the corresponding accelerated test condition.
D. Recom m e nde d S olderi ng m e t hod :
Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max )
Product specifications included in the specifications are effective as of March 1, 2013.
Please be advised that they are standard product specifications for reference only.
We may change, modify or discontinue the product specifications without notice at any time.
So, you need to approve the product specifications before placing an order.
Should you have any question regarding the product specifications,
please contact our sales personnel or application engineers.
Perf ormance Test condition
300%
200%
- Disclaimer & Limitation of Use and Application -
The products listed in this Specification sheet are NOT designed and manufactured for any use
and applications set forth below.
Please note that any misuse of the products deviating from products specifications or information
provided in this Spec sheet may cause serious property damages or personal injury.
We will NOT be liable for any damages resulting from any misuse of the products, specifically
including using the products for high reliability applications as listed below.
If you have any questions regarding this 'Limitation of Use and Application', you should first contact
our sales personnel or application engineers.
①
Aerospace/Aviation equipment
②
Automotive or Transportation equipment (vehicles
,
trains
,
ships
,
etc)
③
Medical equipment
④
Military equipment
⑤
Disaster prevention/crime prevention equipment
⑥
Any other applications with the same as or similar complexity or reliability to the applications
set forth above.
● Disclaimer & Limitation of Use and Application
The products listed in this Specification sheet are NOT designed and manufactured for any use
and applications set forth below.
Please note that any misuse of the products deviating from products specifications or information
provided in this Spec sheet may cause serious property damages or personal injury.
We will NOT be liable for any damages resulting from any misuse of the products, specifically
including using the products for high reliability applications as listed below.
If you have any questions regarding this 'Limitation of Use and Application', you should first contact
our sales personnel or application engineers.
①
Aerospace/Aviation equipment
②
Automotive or Transportation equipment (vehicles, trains, ships, etc)
③
Medical equipment
④
Military equipment
⑤
Disaster prevention/crime prevention equipment
⑥
Power plant control equipment
⑦
Atomic energy-related equipment
⑧
Undersea equipment
⑨
Traffic signal equipment
⑩
Data-processing equipment
⑪
Electric heating apparatus, burning equipment
⑫
Safety equipment
⑬
Any other applications with the same as or similar complexity or reliability to the applications
