CZ FAMILY SERIES/CZCZWCZHCZHWTZTZW 1.5mm pitch/Disconnectable Insulation displacement connectors CZ connector * Distortion resistant construction * Compact and low profile CZW connector * Low insertion force * Locking construction CZH connector * Housing lance * Intarchangeability TZ/TZW connector * The TZ connector is applicable to single-row connection, while the TZW connector is for dual-row connection. * Applicable to wide range of panel thickness * The design of the panel lock part does not allow the wires to be caught there before mounting on the panel. CZ connector: Side entry type header CZ connector: Top entry type TZ connector RPZ connector: Receptacle TZW connector RPZ connector: Plug CZW connector: Receptacle holder Standards ---------------------- CZW connector: Header 0 CZ connector: Receptacle 1 Certified LR20812 Recognized E60389 Specifications ------------------- Item Series Current rating Voltage rating Temperature rise Contact resistance Insulation resistance Withstanding voltage CZ connector used for the harness shown in the abovementioned figure can be replaced to CZH connector. Initial value / 10mmax. After environmental testing / 20mmax. Initial value / 20mmax. After environmental testing / 40mmax. 500Mmin 500VAC/minute UL10272 (Contact JST for other UL style wires.) AWG#28, #26 Conductor / 7-strands, tincoated annealed copper Insulation O.D. / 0.7 to 0.83mm Applicable wire Based upon the 1.5mm pitch CZ connectors, the CZ family connectors have been expanded to meet the requirements of high density packaging. The CZW connector holder allows dualrow wire-to-board connection using the CZ receptacles, while the TZ (single-row) or TZW (dual-row) allows wire-to-wire connection, also using the CZ receptacles. CZCZW connector CZHCZHW connector TZTZW connector 2A AC, DCAWG #26 100V AC, DC -25 to +85(including temperature rise) Applicable PC board thickness Applicable panel thickness AWG#28 to #26 -- -- 0.5 to 2.0mm 1.6mm -- * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. PC board layout (viewed from component side) and Assembly layout <CZ connector through-hole type> Top entry type with CZ receptacles Side entry type with CZH receptacles 0.05 1.5 A 0.1 A 0.80.1 0 0.05 with CZ receptacles with CZH receptacles 0.1 0 9.2 9.8 4.4 4.4 3.4 3.4 Circuit No.1 Connector outline 2.0 0.05 Connector outline 7.3 Circuit No.1 3.4 1.5 0.05 6.7 3.0 0.7 0.70.1 0 0.05 1.5 1.5 3.4 0.7 0.05 2.0 0.05 0.8 4.4 0.05 0.05 1.5 0.1 0 4.4 0.1 Note:1. Tolerances are non-cumulative: 0.05mm for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. 1 CZ FAMILY SERIESCZCZWCZHCZHWTZTZW <CZ connector SMT type> Top entry type Side entry type with CZH receptacles 0.1 4.9 4.9 MIN 0.9 0.8 Connector outline A 1.35 0.1 0.05 0.1 1.2 1.5 1.25 with CZ receptacles 0.1 0 MIN 0.1 0.1 7.8 4.9 4.15 2.75 3.7 7.2 2.7 MIN 7.2 4.35 2.55 0.2 7.8 0.1 0.1 2.7 MIN 0.9 0.1 Connector outline 0.8 <CZW connector through-hole type> Top entry type 0.1 0 0.05 1.35 Side entry type with CZW,CZHW receptacles 3.3 8.3 0.05 14.3 3.4 Line A / Circuit No.1 Connector outline Line B / Circuit No.1 (when Line B is of odd numbers) with CZW,CZHW receptacles 0.05 1.5 9.0 2.50.05 2.50.05 2.50.05 Line B / Circuit No.1 (when Line B is of even numbers) 0.1 0 0.7 0.1 A 1.00.05 1.50.05 1.20.1 0 0.05 0.05 2.00.05 Connector outline 0.70.1 0 0.8 0.05 2.0 A0.1 10.6 0.05 1.5 3.4 1.25 0.05 0.1 0.1 1.2 5.8 0.05 8.3 0.05 3.0 10.8 0.1 3.7 with CZH receptacles 2.2 A 0.05 4.9 with CZ receptacles 0.1 2.8 <CZW connector SMT type> MIN with CZHW receptacles 8.6 2 0.05 10.0 0.1 0.8 0.05 A 0.1 2.7 1.2 0.1 0 8.1 1.5 0.05 0.9 MIN Connector outline Note: 1. Tolerances are non-cumulative: 0.05mm for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. <TZW connector> 5.9 0.05 5.4 <TZ connector> 0.1 0 3.9 14.5 0.1 0 0.1 0 D 0.1 5.4 0.05 E 4.0 E0.1 11.8 with CZ receptacles 5.2 0.05 11.0 D 4.95 16.7 3.9 15.0 with CZ, CZH receptacles with CZH receptacles D,E dimensions: Refer to TZ connector (Until for wire-to-wire connection). D,E dimensions: Refer to TZ connector (Dual-row until for wire-to-wire connection). 2 CZ FAMILY SERIESCZCZWCZHCZHWTZTZW CZ connector receptacle 3 4 5 6 7 8 9 B A 4.4 10 11 12 2.7 4.1 HJST 13 14 15 16 4.1 Yellow 02CZ-6Y 03CZ-6Y 04CZ-6Y 05CZ-6Y 06CZ-6Y 07CZ-6Y 08CZ-6Y 09CZ-6Y 10CZ-6Y 11CZ-6Y 12CZ-6Y 13CZ-6Y 14CZ-6Y 15CZ-6Y 16CZ-6Y 17CZ-6Y 18CZ-6Y 19CZ-6Y 20CZ-6Y Gray 02CZ-6H 03CZ-6H 04CZ-6H 05CZ-6H 06CZ-6H 07CZ-6H 08CZ-6H 09CZ-6H 10CZ-6H 11CZ-6H 12CZ-6H 13CZ-6H 14CZ-6H 15CZ-6H 16CZ-6H 17CZ-6H 18CZ-6H 19CZ-6H 20CZ-6H 2 Circuit No.1(Triangle-mark indicates.) Dimensions (mm) Model No. Circuits 17 18 19 20 Q'ty / box A B 1.5 4.5 2,000 3.0 6.0 2,000 4.5 7.5 2,000 6.0 9.0 2,000 7.5 10.5 2,000 9.0 12.0 2,000 10.5 13.5 2,000 12.0 15.0 1,000 13.5 16.5 1,000 15.0 18.0 1,000 16.5 19.5 1,000 18.0 21.0 1,000 19.5 22.5 1,000 21.0 24.0 1,000 22.5 25.5 1,000 24.0 27.0 1,000 25.5 28.5 1,000 27.0 30.0 1,000 28.5 31.5 1,000 Material and Finish Contact: Phosphor bronze, tin-plated (reflow treatment) Housing: Glass-filled PA 66, UL94V-0 RoHS compliance <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. 02CZ-6HY...yellow H...natural (grayish color) CZH connector contact Applicable wire AWG # mm2 Model No. 4.05 2.2 SCZH-002T-P0.5 1.1 0.080.13 Insulation O.D. (mm) Q'ty / reel 0.81.1 13,000 2826 Material and Finish Phosphor bronze, tin-plated (reflow treatment) 1.5 RoHS compliance Contact Applicator Dies Crimping machine Crimp applicator 1.1 MKS-L SCZH-002T-P0.5 AP-K2N Crimp applicator with dies MK/SCZH-002-05 APLMK SCZH002-05 -- - - CZH connector housing B A 3.7 Circuits Model No. 2 CZHR-02V-S CZHR-03V-S CZHR-04V-S CZHR-05V-S CZHR-06V-S CZHR-07V-S CZHR-08V-S CZHR-09V-S CZHR-10V-S CZHR-11V-S CZHR-12V-S CZHR-13V-S CZHR-14V-S CZHR-15V-S CZHR-16V-S CZHR-17V-S CZHR-19V-S CZHR-20V-S 3 4 1.5 5 6 1 2 3 4 5.0 7 8 9 10 11 C 2.7 12 13 14 15 RoHS compliance 16 <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. 17 ex. 3 CZHR-02V-SS...natural (white) K...black H...gray Y...yellow 19 20 Dimensions(mm) A B C Q'ty / box 1.5 4.5 3.5 1,000 3.0 6.0 5.0 1,000 4.5 7.5 6.5 1,000 6.0 9.0 8.0 1,000 7.5 10.5 9.5 1,000 9.0 12.0 11.0 1,000 10.5 13.5 12.5 1,000 12.0 15.0 14.0 1,000 13.5 16.5 15.5 1,000 15.0 18.0 17.0 1,000 16.5 19.5 18.5 1,000 18.0 21.0 20.0 1,000 19.5 22.5 21.5 1,000 21.0 24.0 23.0 1,000 22.5 25.5 24.5 1,000 24.0 27.0 26.0 1,000 27.0 30.0 29.0 1,000 28.5 31.5 30.5 1,000 Material PBT, UL94V-0, natural (white) CZ FAMILY SERIESCZCZWCZHCZHWTZTZW CZW connector holder 0.8 0.8 A B Dimensions (mm) Circuits Model No. 16 CZWH-16-S CZWH-18-S CZWH-20-S CZWH-22-S CZWH-24-S CZWH-26-S CZWH-28-S CZWH-30-S CZWH-32-S CZWH-34-S CZWH-36-S CZWH-38-S CZWH-40-S 18 Line A / Circuit No.1 20 22 24 26 H JST 28 Line B / Circuit No.1 30 32 8.1 34 36 38 5.7 40 A B Q'ty / box 14.9 13.5 1,000 16.4 15.0 1,000 17.9 16.5 1,000 19.4 18.0 1,000 20.9 19.5 1,000 22.4 21.0 1,000 23.9 22.5 1,000 25.4 24.0 1,000 26.9 25.5 1,000 28.4 27.0 1,000 29.9 28.5 1,000 31.4 30.0 1,000 32.9 31.5 1,000 Material PBT, UL94V-0, natural (white) RoHS compliance CZ connector through-hole type shrouded header Top entry type 4.2 B A Circuits 2 3 6.6 4 5 6 3.4 7 1.5 1.5 9 2.0 Circuit No.1 Circuit No.1 8 10 11 12 Side entry type B A 13 4.2 14 15 1.5 16 JST 3.0 18 19 20 2.0 9.1 H 17 Side entry type S02B-CZHK-B-1 S03B-CZHK-B-1 S04B-CZHK-B-1 S05B-CZHK-B-1 S06B-CZHK-B-1 S07B-CZHK-B-1 S08B-CZHK-B-1 S09B-CZHK-B-1 S10B-CZHK-B-1 S11B-CZHK-B-1 S12B-CZHK-B-1 S13B-CZHK-B-1 S14B-CZHK-B-1 S15B-CZHK-B-1 S16B-CZHK-B-1 S17B-CZHK-B-1 S18B-CZHK-B-1 S19B-CZHK-B-1 S20B-CZHK-B-1 Dimensions (mm) Q'ty / box A B 1.5 6.0 2,072 1,480 3.0 7.5 1,624 1,160 4.5 9.0 1,344 960 6.0 10.5 1,176 840 7.5 12.0 1,008 720 9.0 13.5 896 640 10.5 15.0 784 560 12.0 16.5 728 520 13.5 18.0 672 480 15.0 19.5 616 440 16.5 21.0 560 400 18.0 22.5 504 360 19.5 24.0 504 360 21.0 25.5 448 320 22.5 27.0 448 320 24.0 28.5 392 280 25.5 30.0 392 280 27.0 31.5 392 280 28.5 33.0 336 240 Top entry type Side entry type Material and Finish Circuit No.1 3.4 Circuit No.1 <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. Model No. Top entry type B02B-CZHK-B-1 B03B-CZHK-B-1 B04B-CZHK-B-1 B05B-CZHK-B-1 B06B-CZHK-B-1 B07B-CZHK-B-1 B08B-CZHK-B-1 B09B-CZHK-B-1 B10B-CZHK-B-1 B11B-CZHK-B-1 B12B-CZHK-B-1 B13B-CZHK-B-1 B14B-CZHK-B-1 B15B-CZHK-B-1 B16B-CZHK-B-1 B17B-CZHK-B-1 B18B-CZHK-B-1 B19B-CZHK-B-1 B20B-CZHK-B-1 B02B-CZHK-B-1 H...natural (grayish color) Y...yellow K...black Pin: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PA 66, UL94V-0, natural (grayish color) Note: Models B( )B-CZHK-B are the headers without the boss. Note: Models S( )B-CZHK-B are the headers without the boss. RoHS compliance This product displays (LF)(SN) on a label. CZ connector SMT type shrouded header Top entry type Circuits B 4.7 1.0 2 A 4 5 JST 5 6 7.1 H 8 10 13 14 1.5 1.5 15 1.35 16 17 Side entry type 20 B 4.7 Dimensions( mm) Q'ty / box A B 1.5 6.0 800 1,250 4.5 9.0 800 1,250 6.0 10.5 800 1,250 7.5 12.0 800 10.5 15.0 800 - - 13.5 18.0 800 1,250 18.0 22.5 800 1,250 19.5 24.0 800 21.0 25.5 800 - - 22.5 27.0 800 1,250 24.0 28.5 800 28.5 33.0 800 - - Top entry type Side entry type Pin: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: PA, UL94V-0, natural (ivory) Solder tab: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Note: Models BM( )B-CZSS-TF are the headers without the boss. Note: Models SM( )B-CZSS-TF are the headers without the boss. 5 7.1 JST Side entry type SM02B-CZSS-1-TB SM04B-CZSS-1-TB SM05B-CZSS-1-TB - - SM10B-CZSS-1-TB SM13B-CZSS-1-TB - - SM16B-CZSS-1-TB - - Material and Finish A H Model No. Top entry type BM02B-CZSS-1-TF BM04B-CZSS-1-TF BM05B-CZSS-1-TF BM06B-CZSS-1-TF BM08B-CZSS-1-TF BM10B-CZSS-1-TF BM13B-CZSS-1-TF BM14B-CZSS-1-TF BM15B-CZSS-1-TF BM16B-CZSS-1-TF BM17B-CZSS-1-TF BM20B-CZSS-1-TF RoHS compliance This product displays (LF)(SN) on a label. 1.5 1.5 1.35 <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. B02B-CZSS-1-TF- S...natural (ivory) H...gray 4 CZ FAMILY SERIESCZCZWCZHCZHWTZTZW CZW connector through-hole type shrouded header Top entry type Circuits 16 B A Line A / Circuit No.1 18 20 22 24 B1 HJST A1 26 28 30 Line B / Circuit No.1 32 1.5 34 9.0 36 38 8.3 40 Model No. Top entry type B16B-CZWHK-B-1 B18B-CZWHK-B-1 B20B-CZWHK-B-1 B22B-CZWHK-B-1 B24B-CZWHK-B-1 B26B-CZWHK-B-1 B28B-CZWHK-B-1 B30B-CZWHK-B-1 B32B-CZWHK-B-1 B34B-CZWHK-B-1 B36B-CZWHK-B-1 B38B-CZWHK-B-1 B40B-CZWHK-B-1 Side entry type - - S20B-CZWHS-B-1 - - S26B-CZWHS-B-1 - - - - - - S40B-CZWHS-B-1 Dimensions (mm) Q'ty / box A B 10.5 18.0 420 12.0 19.5 385 - 13.5 21.0 350 280 15.0 22.5 315 16.5 24.0 315 - - 18.0 25.5 280 224 19.5 27.0 280 21.0 28.5 245 22.5 30.0 245 24.0 31.5 245 25.5 33.0 210 27.0 34.5 210 - - - - - - 28.5 36.0 210 168 Top entry type Side entry type - 1.5 Material and Finish 3.4 Pin: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PA 66, UL94V-0, natural (grayish color) Note: Models B( )B-CZWHK-B are the headers without the boss. RoHS compliance This product displays (LF)(SN) on a label. Side entry type <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. B16B-CZWHK-B-1H...natural (grayish color) Y...yellow B 14.3 A Line A / Circuit No.1 1.5 Circuit No. HJST 3.5 3.4 10.5 A1 B1 Line B / Circuit No.1 0.8 3.0 3.3 2.5 CZW connector SMT type shrouded header Top entry type 36 BM36B-CZWSS-1-TF BM40B-CZWSS-1-TF Q'ty / box A B 25.5 33.0 300 28.5 36.0 300 Press pin: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: PA, UL94V-0, natural (ivory) Note: Models BM( )B-CZWSS-TF are the headers without the boss. 0.5 A1 36 RoHS compliance This product displays (LF)(SN) on a label. JST B1 Line B / Circuit No.1 1.5 8.0 10.0 2.0 Dimensions (mm) Material and Finish Line A / Circuit No.1 A 5 Model No. 40 B 1.5 Circuits 3.5 CZ FAMILY SERIESCZCZWCZHCZHWTZTZW TZ connector (Unit for wire-to-wire connection) Circuits 2 3 4 5 C A 3.8 1.9 5.4 6 7 8 3.9 9 10 10.6 H JST 7 14.5 11 12 13 14 15 16 17 B 3.2 18 5.0 19 20 Model No. BU02P-TZ-S BU03P-TZ-S BU04P-TZ-S BU05P-TZ-S BU06P-TZ-S BU07P-TZ-S BU08P-TZ-S BU09P-TZ-S BU10P-TZ-S BU11P-TZ-S BU12P-TZ-S BU13P-TZ-S BU14P-TZ-S BU15P-TZ-S BU16P-TZ-S BU17P-TZ-S BU18P-TZ-S BU19P-TZ-S BU20P-TZ-S Dimensions (mm) Q'ty / box A B C D E 1.5 5.9 3.5 6.3 9.9 500 3.0 7.4 5.0 7.8 11.4 500 4.5 8.9 6.5 9.3 12.9 500 6.0 10.4 8.0 10.8 14.4 500 7.5 11.9 9.5 12.3 15.9 250 9.0 13.4 11.0 13.8 17.4 250 10.5 14.9 12.5 15.3 18.9 250 12.0 16.4 14.0 16.8 20.4 250 13.5 17.9 15.5 18.3 21.9 250 15.0 19.4 17.0 19.8 23.4 250 16.5 20.9 18.5 21.3 24.9 250 18.0 22.4 20.0 22.8 26.4 250 19.5 23.9 21.5 24.3 27.9 250 21.0 25.4 23.0 25.8 29.4 250 22.5 26.9 24.5 27.3 30.9 250 24.0 28.4 26.0 28.8 32.4 250 25.5 29.9 27.5 30.3 33.9 150 27.0 31.4 29.0 31.8 35.4 150 28.5 32.9 30.5 33.3 36.9 100 Material and Finish Pin: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Housing: PA 66, UL94V-0, natural (white) RoHS compliance This product displays (LF)(SN) on a label. TZW connector (Dual-row unit for wire-to-wire connection) Circuits Model No. 16 BU16P-TZW-S BU18P-TZW-S BU20P-TZW-S BU22P-TZW-S BU24P-TZW-S BU26P-TZW-S BU28P-TZW-S BU30P-TZW-S BU32P-TZW-S BU34P-TZW-S BU36P-TZW-S BU38P-TZW-S BU40P-TZW-S 18 B A 20 10.8 22 3.25 24 28 30 14.8 11.75 4.95 26 32 34 36 38 40 C 3.2 Dimensions (mm) Q'ty / box A B C D E 10.5 15.0 19.0 19.4 23.0 160 12.0 16.5 20.5 20.9 24.5 140 13.5 18.0 22.0 22.4 26.0 140 15.0 19.5 23.5 23.9 27.5 140 16.5 21.0 25.0 25.4 29.0 120 18.0 22.5 26.5 26.9 30.5 120 19.5 24.0 28.0 28.4 32.0 120 21.0 25.5 29.5 29.9 33.5 100 22.5 27.0 31.0 31.4 35.0 100 24.0 28.5 32.5 32.9 36.5 100 25.5 30.0 34.0 34.4 38.0 100 27.0 31.5 35.5 35.9 39.5 100 28.5 33.0 37.0 37.4 41.0 80 Material and Finish Pin: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Housing: PA 66, UL94V-0, natural (white) RoHS compliance This product displays (LF)(SN) on a label. 6