®
METALLIZED POLYESTER CAPACITORS
230 SERIES
The unique high performance and
long life characteristics of polyester
account for the varied applications of
this miniature capacitor series. A wide
range of sizes and configurations are
available. You can choose from axial-
lead wrap and fill, oval and round
shapes and rectangular epoxy case
with axial and radial leads.
These capacitors feature extended
foil construction and standard tin-
coated copper-clad steel leads. Nickel,
copper, dumet and other special
leads are available.
Protective clear wrap is offered on
all wrap and fill units. Please add
.010” to maximum T and W dimen-
sion for protective clear wrap.
The potting material and endfills
of Electrocube’s capacitors meet or
exceed the flammability requirements
of UL94VO.
Dimensional variations for all
MFD values are available with the
same volume to meet your design
requirements.
SPECIFICATIONS
TYPICAL DIELECTRIC CHARACTERISTIC CURVES
Temperature: -55°C to +85°C at rated voltage; to +125°C
with 50% voltage derating.
Dielectric Strength: Will withstand 150% at rated voltage
and 25°C for a period not to exceed 1 minute; current limited
to 5 mA.
Life Test: Will withstand rated voltage for 250 hrs. at +125°C
with not more than 1 failure in 12 permitted.
Dissipation Factor: Shall not exceed 1.0% at 25°C.
Dielectric Absorption: Shall not exceed 0.5% at 25°C per
MIL-C-19978.
Acceptance Criteria: Measurement frequency for capacitance
and dissipation factor shall be 1000 Hz for values up to 1 mfd
and 120 Hz for values of 1.0 mfd and up.
Insulation Resistance: At rated voltage or 500V, whichever
is less, units shall meet the minimum values below:
NOTES:
For information regarding insulating sleeves, mountings, special terminals,
non-standard leads, circuit connections and other hardware, please
consult factory.
For styles and ratings not shown, or for unusual requirements necessitated
by special circuit applications (including higher IR or lower DF), consult
the factory direct.
% CAPACITANCE CHANGE
% DISSIPATION FACTOR
INSULATION RESISTANCE
(MEGOHMS TIMES MICR OF ARADS)
All Electrocube film capacitors have endfills and tape that
meet or exceed the flammability requirements of UL94V0.
3366 Pomona Blvd. • Pomona, CA 91768 • TEL: (909) 595-4037 • FAX: (909) 595-0186
e-mail: esales@electrocube.com • Internet: www.electrocube.com • (IR: 9/99)
®
®
METALLIZED POLYESTER CAPACITORS
230 SERIES
FLAME RETARDANT
230B WRAP AND FILL, OVAL
FLAME RETARDANT
230C WRAP AND FILL, FLAT
FLAME RETARDANT
230D WRAP AND FILL, ROUND
FLAME RETARDANT
231A EPOXY CASE,
RECTANGULAR
AXIAL LEADS
FLAME RETARDANT
232A EPOXY CASE,
RECTANGULAR
RADIAL LEADS
SERIES NO. DESCRIPTION
3366 Pomona Blvd. • Pomona, CA 91768 • TEL: (909) 595-4037 • FAX: (909) 595-0186
e-mail: esales@electrocube.com • Internet: www.electrocube.com • (IR: 9/99)
®
®
METALLIZED POLYESTER
230B SERIES
.0010 230B1Z102* .09 .18 .40 26 230B1B102* .09 .18 .40 26 230B1C102* .09 .18 .40 26
.0012 230B1Z122* .09 .18 .40 26 230B1B122* .09 .18 .40 26 230B1C122* .09 .18 .40 26
.0015 230B1Z152* .09 .18 .40 26 230B1B152* .09 .18 .40 26 230B1C152* .09 .18 .40 26
.0018 230B1Z182* .09 .18 .40 26 230B1B182* .09 .18 .40 26 230B1C182* .09 .18 .40 26
.0022 230B1Z222* .09 .18 .40 26 230B1B222* .09 .18 .40 26 230B1C222* .09 .18 .40 26
.0027 230B1Z272* .09 .18 .40 26 230B1B272* .09 .18 .40 26 230B1C272* .09 .18 .40 26
.0033 230B1Z332* .09 .18 .40 26 230B1B332* .09 .18 .40 26 230B1C332* .09 .18 .40 26
.0039 230B1Z392* .09 .18 .40 26 230B1B392* .09 .18 .40 26 230B1C392* .09 .18 .40 26
.0047 230B1Z472* .09 .18 .40 26 230B1B472* .09 .18 .40 26 230B1C472* .09 .18 .40 26
.0056 230B1Z562* .09 .18 .40 26 230B1B562* .09 .18 .40 26 230B1C562* .09 .18 .40 26
.0068 230B1Z682* .09 .18 .40 26 230B1B682* .09 .18 .40 26 230B1C682* .09 .18 .40 26
.0082 230B1Z822* .09 .18 .40 26 230B1B822* .09 .18 .40 26 230B1C822* .09 .18 .40 26
.010 230B1Z103* .09 .18 .40 26 230B1B103* .09 .18 .40 26 230B1C103* .09 .18 .40 26
.012 230B1Z123* .09 .18 .40 26 230B1B123* .09 .18 .40 26 230B1C123* .09 .18 .40 26
.015 230B1Z153* .09 .18 .40 26 230B1B153* .09 .18 .40 26 230B1C153* .09 .18 .40 26
.018 230B1Z183* .09 .18 .40 26 230B1B183* .09 .18 .40 26 230B1C183* .10 .20 .40 26
.022 230B1Z223* .09 .18 .40 26 230B1B223* .09 .18 .40 26 230B1C223* .09 .18 .53 26
.027 230B1Z273* .09 .18 .40 26 230B1B273* .09 .18 .40 26 230B1C273* .09 .18 .53 26
.033 230B1Z333* .09 .18 .40 26 230B1B333* .09 .18 .40 26 230B1C333* .09 .18 .53 26
.039 230B1Z393* .09 .18 .40 26 230B1B393* .09 .18 .40 26 230B1C393* .09 .18 .53 26
.047 230B1Z473* .09 .18 .40 26 230B1B473* .09 .18 .40 26 230B1C473* .09 .18 .53 26
.056 230B1Z563* .09 .18 .40 26 230B1B563* .09 .18 .40 26 230B1C563* .11 .20 .53 26
.068 230B1Z683* .09 .18 .40 26 230B1B683* .10 .19 .40 26 230B1C683* .12 .22 .53 24
.082 230B1Z823* .09 .18 .40 26 230B1B823* .11 .20 .40 26 230B1C823* .14 .23 .53 24
.10 230B1Z104* .09 .18 .40 26 230B1B104* .09 .18 .53 26 230B1C104* .16 .25 .53 24
.12 230B1Z124* .09 .18 .40 26 230B1B124* .09 .18 .53 26 230B1C124* .17 .27 .53 24
.15 230B1Z154* .09 .18 .40 26 230B1B154* .09 .18 .53 26 230B1C154* .20 .29 .53 24
.18 230B1Z184* .10 .20 .40 26 230B1B184* .09 .18 .53 26 230B1C184* .22 .32 .53 24
.22 230B1Z224* .11 .22 .40 26 230B1B224* .10 .20 .53 26 230B1C224* .18 .28 .65 24
.27 230B1Z274* .13 .22 .40 26 230B1B274* .12 .22 .53 24 230B1C274* .20 .29 .65 24
.33 230B1Z334* .15 .24 .40 26 230B1B334* .14 .23 .53 24 230B1C334* .24 .33 .65 24
.39 230B1Z394* .16 .25 .40 26 230B1B394* .15 .25 .53 24 230B1C394* .21 .30 .78 24
.47 230B1Z474* .18 .28 .40 26 230B1B474* .17 .27 .53 24 230B1C474* .24 .33 .78 24
.56 230B1Z564* .12 .22 .53 26 230B1B564* .19 .28 .53 24 230B1C564* .26 .36 .78 24
.68 230B1Z684* .13 .23 .53 24 230B1B684* .22 .31 .53 24 230B1C684* .29 .39 .78 24
.82 230B1Z824* .15 .24 .53 24 230B1B824* .18 .27 .65 24 230B1C824* .33 .42 .78 22
1.0 230B1Z105* .17 .26 .53 24 230B1B105* .20 .29 .65 24 230B1C105* .32 .41 .90 22
1.2 230B1Z125* .19 .28 .53 24 230B1B125* .22 .32 .65 24 230B1C125* .25 .42 1.15 22
1.5 230B1Z155* .22 .31 .53 24 230B1B155* .21 .30 .78 24 230B1C155* .29 .45 1.15 22
1.8 230B1Z185* .25 .34 .53 24 230B1B185* .24 .36 .78 24 230B1C185* .32 .49 1.15 22
2.0 230B1Z205* .26 .35 .53 24 230B1B205* .28 .37 .78 24 230B1C205* .38 .52 1.15 20
3.0 230B1Z305* .25 .35 .65 24 230B1B305* .34 .44 .78 22 230B1C305* .44 .61 1.15 20
4.0 230B1Z405* .25 .35 .78 24 230B1B405* .32 .46 .90 22 230B1C405* .46 .63 1.40 20
5.0 230B1Z505* .28 .38 .78 24 230B1B505* .28 .44 1.15 22 230B1C505* .45 .61 1.65 20
6.0 230B1Z605* .31 .42 .78 24 230B1B605* .33 .49 1.15 22 230B1C605* .52 .69 1.65 20
8.0 230B1Z805* .32 .42 .90 22 230B1B805* .35 .51 1.15 20 230B1C805* .53 .70 1.90 20
10.0 230B1Z106* .37 .46 .90 22 230B1B106* .46 .63 1.15 20 230B1C106* .66 .82 1.90 20
12.0 230B1Z126* .30 .48 1.15 22 230B1B126* .51 .68 1.15 20 230B1C126* .78 .95 1.90 20
15.0 230B1Z156* .35 .51 1.15 22 230B1B156* .50 .67 1.40 20 230B1C156* .82 .99 1.90 20
18.0 230B1Z186* .38 .55 1.15 22 230B1B186* .56 .72 1.40 20 230B1C186* .85 1.11 1.90 20
20.0 230B1Z206* .41 .57 1.15 22 230B1B206* .52 .68 1.65 20 230B1C206* 1.00 1.13 1.90 20
30.0 230B1Z306* .52 .69 1.15 20 230B1B306* .59 .75 1.90 20 230B1C306 1.10 1.30 2.15 20
40.0 230B1Z406* .61 .78 1.15 20 230B1B406* .72 .88 1.90 20 230B1C406 1.10 1.30 2.75 20
50.0 230B1Z506* .60 .77 1.40 20 230B1B506* .79 .95 1.90 20 230B1C506 1.25 1.45 2.75 20
75.0 230B1Z756* .67 .84 1.65 20 230B1B756* .96 1.13 1.90 18 230B1C756 1.49 1.79 2.75 18
100.0 230B1Z1006* .65 .83 2.21 18 230B1B1006* 1.10 1.30 1.90 18 230B1C1006 1.70 2.08 2.75 18
DIMENSIONS LEAD DIMENSIONS LEAD DIMENSIONS LEAD
SIZE SIZE SIZE
MFD PART NO. T W L (AWG) PART NO. T W L (AWG) PART NO. T W L (AWG)
35 VOLT DC 100 VOLT DC 200 VOLT DC
*Add tolerance designator to complete part number: F = ±1%, G = ±2%, J = ±5%, K = ±10%, M = ±20%
WRAP AND FILL
OVAL CONFIGURATION
LEAD LENGTH: 2.0” ± .50”
For max. T, W and L dimensions, allow +.050”.
3366 Pomona Blvd. • Pomona, CA 91768 • TEL: (909) 595-4037 • FAX: (909) 595-0186
e-mail: esales@electrocube.com • Internet: www.electrocube.com • (A: 04/01)
®
®
METALLIZED POLYESTER
230B SERIES
WRAP AND FILL
OVAL CONFIGURATION
.0010 230B1E102* .09 .18 .40 26 230B1F102* .09 .18 .40 26 230B1G102* - - - -
.0012 230B1E122* .09 .18 .40 26 230B1F122* .09 .18 .40 26 230B1G122* - - - -
.0015 230B1E152* .09 .18 .40 26 230B1F152* .09 .18 .40 26 230B1G152* - - - -
.0018 230B1E182* .09 .18 .40 26 230B1F182* .09 .18 .40 26 230B1G182* - - - -
.0022 230B1E222* .09 .18 .40 26 230B1F222* .09 .18 .40 26 230B1G222* - - - -
.0027 230B1E272* .09 .18 .40 26 230B1F272* .10 .19 .40 26 230B1G272* - - - -
.0033 230B1E332* .09 .18 .40 26 230B1F332* .09 .18 .53 26 230B1G332* - - - -
.0039 230B1E392* .09 .18 .40 26 230B1F392* .09 .18 .53 26 230B1G392* - - - -
.0047 230B1E472* .09 .18 .40 26 230B1F472* .09 .18 .53 26 230B1G472* - - - -
.0056 230B1E562* .10 .20 .40 26 230B1F562* .09 .18 .53 26 230B1G562* - - - -
.0068 230B1E682* .11 .21 .40 26 230B1F682* .11 .20 .53 26 230B1G682* - - - -
.0082 230B1E822* .09 .18 .53 26 230B1F822* .12 .22 .53 24 230B1G822* - - - -
.010 230B1E103* .09 .18 .53 26 230B1F103* .14 .23 .53 24 230B1G103* - - - -
.012 230B1E123* .09 .18 .53 26 230B1F123* .15 .25 .53 24 230B1G123* - - - -
.015 230B1E153* .09 .18 .53 26 230B1F153* .18 .27 .53 24 230B1G153* - - - -
.018 230B1E183* .11 .20 .53 26 230B1F183* .20 .29 .53 24 230B1G183* - - - -
.022 230B1E223* .12 .22 .53 24 230B1F223* .22 .32 .53 24 230B1G223* - - - -
.027 230B1E273* .14 .23 .53 24 230B1F273* .20 .29 .68 24 230B1G273* - - - -
.033 230B1E333* .16 .25 .53 24 230B1F333* .22 .31 .68 24 230B1G333* - - - -
.039 230B1E393* .17 .27 .53 24 230B1F393* .20 .30 .78 24 230B1G393* - - - -
.047 230B1E473* .19 .29 .53 24 230B1F473* .25 .32 .78 24 230B1G473* - - - -
.056 230B1E563* .22 .31 .53 24 230B1F563* .25 .34 .78 24 230B1G563* - - - -
.068 230B1E683* .18 .27 .65 24 230B1F683* .28 .37 .78 24 230B1G683* - - - -
.082 230B1E823* .20 .29 .65 24 230B1F823* .31 .41 .78 22 230B1G823* - - - -
.10 230B1E104* .22 .32 .65 24 230B1F104* .31 .40 .95 22 230B1G104* - - - -
.12 230B1E124* .20 .30 .78 24 230B1F124* .24 .41 1.21 22 230B1G124* - - - -
.15 230B1E154* .23 .33 .78 24 230B1F154* .28 .44 1.21 22 230B1G154* - - - -
.18 230B1E184* .26 .34 .78 24 230B1F184* .31 .48 1.21 22 230B1G184* - - - -
.22 230B1E224* .29 .39 .78 24 230B1F224* .35 .52 1.21 20 230B1G224* - - - -
.27 230B1E274* .33 .42 .78 22 230B1F274* .40 .57 1.21 20 230B1G274* - - - -
.33 230B1E334* .32 .41 .90 22 230B1F334* .45 .61 1.21 20 230B1G334* - - - -
.39 230B1E394* .25 .42 1.15 22 230B1F394* .43 .59 1.45 20 230B1G394* - - - -
.47 230B1E474* .28 .45 1.15 22 230B1F474* .48 .65 1.45 20 230B1G474* - - - -
.56 230B1E564* .31 .48 1.15 22 230B1F564* .47 .63 1.70 20 230B1G564* - - - -
.68 230B1E684* .35 .52 1.15 20 230B1F684* .47 .64 1.90 20 230B1G684* - - - -
.82 230B1E824* .39 .56 1.15 20 230B1F824* .53 .70 1.90 20 230B1G824* - - - -
1.0 230B1E105* .44 .61 1.15 20 230B1F105* .59 .76 1.90 20 230B1G105* - - - -
1.2 230B1E125* .42 .59 1.40 20 230B1F125* .66 .82 1.90 20 230B1G125* - - - -
1.5 230B1E155* .48 .65 1.40 20 230B1F155* .75 .91 1.90 20 230B1G155* - - - -
1.8 230B1E185* .47 .64 1.65 20 230B1F185* .79 .96 1.90 20 230B1G185* - - - -
2.0 230B1E205* .45 .62 1.90 20 230B1F205* .88 1.05 1.90 20 230B1G205* - - - -
3.0 230B1E305* .57 .74 1.90 20 230B1F305* .99 1.15 2.21 20 230B1G305* - - - -
4.0 230B1E405* .68 .84 1.90 20 230B1F405* 1.15 1.32 2.21 20 230B1G405* - - - -
5.0 230B1E505* .77 .93 1.90 20 230B1F505* 1.25 1.43 2.21 20 230B1G505* - - - -
6.0 230B1E605* .83 .99 1.90 20 230B1F605* 1.42 1.60 2.21 20 230B1G605* - - - -
8.0 230B1E805* 1.02 1.19 1.90 20 230B1F805* 1.64 1.80 2.21 20 230B1G805* - - - -
10.0 230B1E106* 1.09 1.26 1.90 20 230B1F106* 1.74 2.13 2.21 20 230B1G106* - - - -
12.0 230B1E126* 1.20 1.37 1.90 20 230B1F126* - - - - 230B1G126* - - - -
15.0 230B1E156* 1.21 1.40 2.21 20 230B1F156* - - - - 230B1G156* - - - -
18.0 230B1E186* 1.38 1.54 2.21 20 230B1F186* - - - - 230B1G186* - - - -
20.0 230B1E206* 1.45 1.65 2.21 20 230B1F206* - - - - 230B1G206* - - - -
30.0 230B1E306* - - - - 230B1F306* - - - - 230B1G306* - - - -
40.0 230B1E406* - - - - 230B1F406* - - - - 230B1G406* - - - -
50.0 230B1E506* - - - - 230B1F506* - - - - 230B1G506* - - - -
75.0 230B1E756* - - - - 230B1F756* - - - - 230B1G756* - - - -
100.0 230B1E1006* - - - - 230B1F1006* - - - - 230B1G1006* - - - -
DIMENSIONS LEAD DIMENSIONS LEAD DIMENSIONS LEAD
SIZE SIZE SIZE
MFD PART NO. T W L (AWG) PART NO. T W L (AWG) PART NO. T W L (AWG)
400 VOLT DC 600 VOLT DC 1000 VOLT DC
*Add tolerance designator to complete part number: F = ±1%, G = ±2%, J = ±5%, K = ±10%, M = ±20%
LEAD LENGTH: 2.0” ± .50”
For max. T, W and L dimensions, allow +.050”.
PLEASE CONSULT FACTORY
3366 Pomona Blvd. • Pomona, CA 91768 • TEL: (909) 595-4037 • FAX: (909) 595-0186
e-mail: esales@electrocube.com • Internet: www.electrocube.com • (A: 07/03)
®
.0010 230C1Z102* - - - - 230C1B102* - - - - 230C1C102* - - - -
.0012 230C1Z122* - - - - 230C1B122* - - - - 230C1C122* - - - -
.0015 230C1Z152* - - - - 230C1B152* - - - - 230C1C152* - - - -
.0018 230C1Z182* - - - - 230C1B182* - - - - 230C1C182* - - - -
.0022 230C1Z222* - - - - 230C1B222* - - - - 230C1C222* - - - -
.0027 230C1Z272* - - - - 230C1B272* - - - - 230C1C272* - - - -
.0033 230C1Z332* - - - - 230C1B332* - - - - 230C1C332* - - - -
.0039 230C1Z392* - - - - 230C1B392* - - - - 230C1C392* - - - -
.0047 230C1Z472* - - - - 230C1B472* - - - - 230C1C472* - - - -
.0056 230C1Z562* - - - - 230C1B562* - - - - 230C1C562* - - - -
.0068 230C1Z682* - - - - 230C1B682* - - - - 230C1C682* - - - -
.0082 230C1Z822* - - - - 230C1B822* - - - - 230C1C822* - - - -
.010 230C1Z103* - - - - 230C1B103* - - - - 230C1C103* - - - -
.012 230C1Z123* - - - - 230C1B123* - - - - 230C1C123* - - - -
.015 230C1Z153* - - - - 230C1B153* - - - - 230C1C153* - - - -
.018 230C1Z183* - - - - 230C1B183* - - - - 230C1C183* - - - -
.022 230C1Z223* - - - - 230C1B223* - - - - 230C1C223* - - - -
.027 230C1Z273* - - - - 230C1B273* - - - - 230C1C273* - - - -
.033 230C1Z333* - - - - 230C1B333* - - - - 230C1C333* - - - -
.039 230C1Z393* - - - - 230C1B393* - - - - 230C1C393* - - - -
.047 230C1Z473* - - - - 230C1B473* - - - - 230C1C473* - - - -
.056 230C1Z563* - - - - 230C1B563* - - - - 230C1C563* - - - -
.068 230C1Z683* - - - - 230C1B683* - - - - 230C1C683* .12 .20 .53 26
.082 230C1Z823* - - - - 230C1B823* - - - - 230C1C823* .09 .26 .53 26
.10 230C1Z104* - - - - 230C1B104* .12 .32 .40 26 230C1C104* .09 .36 .53 26
.12 230C1Z124* - - - - 230C1B124* .13 .33 .40 26 230C1C124* .09 .38 .53 26
.15 230C1Z154* - - - - 230C1B154* .09 .25 .53 26 230C1C154* .11 .39 .53 26
.18 230C1Z184* - - - - 230C1B184* .10 .26 .53 26 230C1C184* .11 .40 .65 26
.22 230C1Z224* - - - - 230C1B224* .10 .27 .53 26 230C1C224* .13 .42 .65 26
.27 230C1Z274* - - - - 230C1B274* .12 .28 .53 26 230C1C274* .12 .42 .78 26
.33 230C1Z334* - - - - 230C1B334* .12 .33 .53 26 230C1C334* .15 .45 .78 24
.39 230C1Z394* - - - - 230C1B394* .13 .36 .53 26 230C1C394* .18 .47 .78 24
.47 230C1Z474* - - - - 230C1B474* .13 .42 .53 24 230C1C474* .18 .57 .78 24
.56 230C1Z564* - - - - 230C1B564* .13 .42 .65 24 230C1C564* .15 .54 .78 24
.68 230C1Z684* - - - - 230C1B684* .14 .43 .65 24 230C1C684* .17 .56 .78 24
.82 230C1Z824* - - - - 230C1B824* .15 .44 .65 24 230C1C824* .20 .59 .78 22
1.0 230C1Z105* - - - - 230C1B105* .13 .43 .78 24 230C1C105* .23 .62 .78 22
1.2 230C1Z125* - - - - 230C1B125* .15 .45 .78 24 230C1C125* .26 .66 .78 22
1.5 230C1Z155* - - - - 230C1B155* .17 .46 .78 22 230C1C155* .28 .58 .90 22
1.8 230C1Z185* - - - - 230C1B185* .18 .47 .78 22 230C1C185* .38 .68 .90 22
2.0 230C1Z205* - - - - 230C1B205* .15 .45 .90 22 230C1C205* .28 .58 1.15 22
2.5 230C1Z255* - - - - 230C1B255* .18 .47 .90 22 230C1C255* .34 .73 1.15 22
3.0 230C1Z305* - - - - 230C1B305* .15 .46 1.15 22 230C1C305* .34 .74 1.15 22
3.5 230C1Z355* - - - - 230C1B355* .20 .50 1.15 22 230C1C355* .35 .84 1.15 22
4.0 230C1Z405* - - - - 230C1B405* .19 .49 1.15 22 230C1C405* .40 .90 1.15 22
4.5 230C1Z455* - - - - 230C1B455* .20 .49 1.40 22 230C1C455* .45 .95 1.15 20
5.0 230C1Z505* - - - - 230C1B505* .16 .55 1.40 22 230C1C505* .40 .90 1.40 20
6.0 230C1Z605* - - - - 230C1B605* .18 .57 1.40 22 230C1C605* .46 .76 1.65 20
8.0 230C1Z805* - - - - 230C1B805* .23 .61 1.40 22 230C1C805* .47 1.08 1.65 20
10.0 230C1Z106* - - - - 230C1B106* .27 .66 1.40 22 230C1C106* .52 1.20 1.65 20
12.0 230C1Z126* - - - - 230C1B126* .24 .73 1.90 22 230C1C126* - - - -
15.0 230C1Z156* - - - - 230C1B156* .26 .75 1.90 20 230C1C156* - - - -
18.0 230C1Z186* - - - - 230C1B186* .28 .76 1.90 20 230C1C186* - - - -
20.0 230C1Z206* - - - - 230C1B206* .30 .80 1.90 20 230C1C206* - - - -
30.0 230C1Z306* - - - - 230C1B306* .35 1.14 1.90 20 230C1C306* - - - -
40.0 230C1Z406* - - - - 230C1B406* .40 1.20 1.90 20 230C1C406* - - - -
50.0 230C1Z506* - - - - 230C1B506* .50 1.25 1.90 20 230C1C506* - - - -
®
METALLIZED POLYESTER
230C SERIES
DIMENSIONS LEAD DIMENSIONS LEAD DIMENSIONS LEAD
SIZE SIZE SIZE
MFD PART NO. T W L (AWG) PART NO. T W L (AWG) PART NO. T W L (AWG)
35 VOLT DC 100 VOLT DC 200 VOLT DC
*Add tolerance designator to complete part number: F = ±1%, G = ±2%, J = ±5%, K = ±10%, M = ±20%
WRAP AND FILL
FLAT CONFIGURATION
For max. T, W and L dimensions, allow +.050”. LEAD LENGTH: 2.0” ± .50”
PLEASE CONSULT FACTORY
3366 Pomona Blvd. • Pomona, CA 91768 • TEL: (909) 595-4037 • FAX: (909) 595-0186
e-mail: esales@electrocube.com • Internet: www.electrocube.com • (B: 07/03)
®
®
METALLIZED POLYESTER
230C SERIES
.0010 230C1E102* .09 .18 .56 26 230C1F102* .09 .18 .56 26 230C1G102* - - - -
.0012 230C1E122* .09 .18 .56 26 230C1F122* .09 .18 .56 26 230C1G122* - - - -
.0015 230C1E152* .09 .18 .56 26 230C1F152* .09 .18 .56 26 230C1G152* - - - -
.0018 230C1E182* .09 .18 .56 26 230C1F182* .09 .18 .56 26 230C1G182* - - - -
.0022 230C1E222* .09 .18 .56 26 230C1F222* .09 .18 .56 26 230C1G222* - - - -
.0027 230C1E272* .09 .18 .56 26 230C1F272* .09 .18 .56 26 230C1G272* - - - -
.0033 230C1E332* .09 .18 .56 26 230C1F332* .09 .18 .56 26 230C1G332* - - - -
.0039 230C1E392* .09 .18 .56 26 230C1F392* .09 .18 .56 26 230C1G392* - - - -
.0047 230C1E472* .09 .18 .56 26 230C1F472* .09 .18 .56 26 230C1G472* - - - -
.0056 230C1E562* .09 .18 .56 26 230C1F562* .09 .18 .56 26 230C1G562* - - - -
.0068 230C1E682* .09 .25 .56 26 230C1F682* .09 .25 .56 26 230C1G682* - - - -
.0082 230C1E822* .09 .27 .56 26 230C1F822* .09 .27 .56 26 230C1G822* - - - -
.010 230C1E103* .09 .27 .56 26 230C1F103* .09 .27 .56 26 230C1G103* - - - -
.012 230C1E123* .09 .28 .56 26 230C1F123* .09 .28 .56 26 230C1G123* - - - -
.015 230C1E153* .09 .35 .56 26 230C1F153* .09 .35 .56 26 230C1G153* - - - -
.018 230C1E183* .09 .21 .53 26 230C1F183* .10 .38 .56 26 230C1G183* - - - -
.022 230C1E223* .09 .26 .53 26 230C1F223* .11 .31 .69 26 230C1G223* - - - -
.027 230C1E273* .09 .27 .53 26 230C1F273* .12 .32 .69 26 230C1G273* - - - -
.033 230C1E333* .09 .28 .53 26 230C1F333* .12 .40 .69 26 230C1G333* - - - -
.039 230C1E393* .10 .29 .53 26 230C1F393* .13 .42 .69 26 230C1G393* - - - -
.047 230C1E473* .11 .31 .53 26 230C1F473* .16 .45 .69 24 230C1G473* - - - -
.056 230C1E563* .12 .42 .53 26 230C1F563* .15 .47 .81 24 230C1G563* - - - -
.068 230C1E683* .10 .30 .65 26 230C1F683* .17 .46 .81 24 230C1G683* - - - -
.082 230C1E823* .13 .32 .65 26 230C1F823* .19 .49 .81 24 230C1G823* - - - -
.10 230C1E104* .14 .43 .65 26 230C1F104* .19 .58 .81 24 230C1G104* - - - -
.12 230C1E124* .16 .45 .65 24 230C1F124* .22 .61 .81 22 230C1G124* - - - -
.15 230C1E154* .19 .48 .65 24 230C1F154* .18 .67 .95 22 230C1G154* - - - -
.18 230C1E184* .15 .44 .78 24 230C1F184* .20 .69 .95 22 230C1G184* - - - -
.22 230C1E224* .17 .47 .78 24 230C1F224* .24 .73 .95 22 230C1G224* - - - -
.27 230C1E274* .18 .56 .78 24 230C1F274* .23 .74 1.21 22 230C1G274* - - - -
.33 230C1E334* .16 .55 .90 24 230C1F334* .28 .77 1.21 22 230C1G334* - - - -
.39 230C1E394* .17 .57 .90 24 230C1F394* .25 .74 1.45 22 230C1G394* - - - -
.47 230C1E474* .23 .61 .90 22 230C1F474* .26 .84 1.45 22 230C1G474* - - - -
.56 230C1E564* .24 .63 .90 22 230C1F564* .26 .75 1.96 22 230C1G564* - - - -
.68 230C1E684* .27 .67 .90 22 230C1F684* .27 .85 1.96 22 230C1G684* - - - -
.82 230C1E824* .24 .72 1.15 22 230C1F824* .31 .90 1.96 20 230C1G824* - - - -
1.0 230C1E105* .27 .76 1.15 22 230C1F105* .36 .95 1.96 20 230C1G105* - - - -
1.2 230C1E125* .31 .90 1.15 22 230C1F125* .43 1.04 1.96 20 230C1G125* - - - -
1.5 230C1E155* .30 .79 1.40 22 230C1F155* - - - - 230C1G155* - - - -
1.8 230C1E185* .33 .82 1.40 22 230C1F185* - - - - 230C1G185* - - - -
2.0 230C1E205* .33 .81 1.65 20 230C1F205* - - - - 230C1G205* - - - -
2.5 230C1E255* .36 1.10 1.65 20 230C1F255* - - - - 230C1G255* - - - -
3.0 230C1E305* - - - - 230C1F305* - - - - 230C1G305* - - - -
3.5 230C1E355* - - - - 230C1F355* - - - - 230C1G355* - - - -
4.0 230C1E405* - - - - 230C1F405* - - - - 230C1G405* - - - -
4.5 230C1Z455* - - - - 230C1F455* - - - - 230C1G455* - - - -
5.0 230C1E505* - - - - 230C1F505* - - - - 230C1G505* - - - -
6.0 230C1E605* - - - - 230C1F605* - - - - 230C1G605* - - - -
8.0 230C1E805* - - - - 230C1F805* - - - - 230C1G805* - - - -
10.0 230C1E106* - - - - 230C1F106* - - - - 230C1G106* - - - -
12.0 230C1E126* - - - - 230C1F126* - - - - 230C1G126* - - - -
15.0 230C1E156* - - - - 230C1F156* - - - - 230C1G156* - - - -
18.0 230C1E186* - - - - 230C1F186* - - - - 230C1G186* - - - -
20.0 230C1E206* - - - - 230C1F206* - - - - 230C1G206* - - - -
30.0 230C1E306* - - - - 230C1F306* - - - - 230C1G306* - - - -
40.0 230C1E406* - - - - 230C1F406* - - - - 230C1G406* - - - -
50.0 230C1E506* - - - - 230C1F506* - - - - 230C1G506* - - - -
DIMENSIONS LEAD DIMENSIONS LEAD DIMENSIONS LEAD
SIZE SIZE SIZE
MFD PART NO. T W L (AWG) PART NO. T W L (AWG) PART NO. T W L (AWG)
400 VOLT DC 600 VOLT DC 1000 VOLT DC
*Add tolerance designator to complete part number: F = ±1%, G = ±2%, J = ±5%, K = ±10%, M = ±20%
WRAP AND FILL
FLAT CONFIGURATION
For max. T, W and L dimensions, allow +.050”. LEAD LENGTH: 2.0” ± .50”
PLEASE CONSULT FACTORY
3366 Pomona Blvd. • Pomona, CA 91768 • TEL: (909) 595-4037 • FAX: (909) 595-0186
e-mail: esales@electrocube.com • Internet: www.electrocube.com • (B: 04/01)
®
®
METALLIZED POLYESTER
230D SERIES
.0010 230D1Z102* - - - 230D1B102* .15 .40 24 230D1C102* .15 .40 24
.0012 230D1Z122* - - - 230D1B122* .15 .40 24 230D1C122* .15 .40 24
.0015 230D1Z152* - - - 230D1B152* .15 .40 24 230D1C152* .15 .40 24
.0018 230D1Z182* - - - 230D1B182* .15 .40 24 230D1C182* .15 .40 24
.0022 230D1Z222* - - - 230D1B222* .15 .40 24 230D1C222* .15 .40 24
.0027 230D1Z272* - - - 230D1B272* .15 .40 24 230D1C272* .15 .40 24
.0033 230D1Z332* - - - 230D1B332* .15 .40 24 230D1C332* .15 .40 24
.0039 230D1Z392* - - - 230D1B392* .15 .40 24 230D1C392* .15 .40 24
.0047 230D1Z472* - - - 230D1B472* .15 .40 24 230D1C472* .15 .40 24
.0056 230D1Z562* - - - 230D1B562* .15 .40 24 230D1C562* .15 .40 24
.0068 230D1Z682* - - - 230D1B682* .15 .40 24 230D1C682* .15 .40 24
.0082 230D1Z822* - - - 230D1B822* .15 .40 24 230D1C822* .15 .40 24
.010 230D1Z103* - - - 230D1B103* .15 .40 24 230D1C103* .15 .40 24
.012 230D1Z123* - - - 230D1B123* .15 .40 24 230D1C123* .15 .40 24
.015 230D1Z153* - - - 230D1B153* .15 .40 24 230D1C153* .15 .40 24
.018 230D1Z183* - - - 230D1B183* .15 .40 24 230D1C183* .16 .40 24
.022 230D1Z223* - - - 230D1B223* .15 .40 24 230D1C223* .15 .53 24
.027 230D1Z273* - - - 230D1B273* .15 .40 24 230D1C273* .15 .53 24
.033 230D1Z333* - - - 230D1B333* .15 .40 24 230D1C333* .15 .53 24
.039 230D1Z393* - - - 230D1B393* .15 .40 24 230D1C393* .15 .53 24
.047 230D1Z473* - - - 230D1B473* .15 .40 24 230D1C473* .15 .53 24
.056 230D1Z563* - - - 230D1B563* .15 .40 24 230D1C563* .17 .53 24
.068 230D1Z683* - - - 230D1B683* .16 .40 24 230D1C683* .18 .53 24
.082 230D1Z823* - - - 230D1B823* .17 .40 24 230D1C823* .20 .53 24
.10 230D1Z104* - - - 230D1B104* .15 .53 24 230D1C104* .22 .53 24
.12 230D1Z124* - - - 230D1B124* .15 .53 24 230D1C124* .23 .53 24
.15 230D1Z154* - - - 230D1B154* .15 .53 24 230D1C154* .26 .53 24
.18 230D1Z184* - - - 230D1B184* .15 .53 24 230D1C184* .28 .53 24
.22 230D1Z224* - - - 230D1B224* .16 .53 24 230D1C224* .24 .65 24
.27 230D1Z274* - - - 230D1B274* .18 .53 24 230D1C274* .26 .65 24
.33 230D1Z334* - - - 230D1B334* .20 .53 24 230D1C334* .30 .65 24
.39 230D1Z394* - - - 230D1B394* .21 .53 24 230D1C394* .27 .78 24
.47 230D1Z474* - - - 230D1B474* .23 .53 24 230D1C474* .30 .78 24
.56 230D1Z564* - - - 230D1B564* .25 .53 24 230D1C564* .32 .78 24
.68 230D1Z684* - - - 230D1B684* .28 .53 24 230D1C684* .35 .78 22
.82 230D1Z824* - - - 230D1B824* .24 .65 24 230D1C824* .39 .78 22
1.0 230D1Z105* - - - 230D1B105* .26 .65 24 230D1C105* .38 .90 22
1.2 230D1Z125* - - - 230D1B125* .28 .65 24 230D1C125* .36 1.15 22
1.5 230D1Z155* - - - 230D1B155* .27 .78 24 230D1C155* .39 1.15 22
1.8 230D1Z185* - - - 230D1B185* .29 .78 24 230D1C185* .43 1.15 22
2.0 230D1Z205* - - - 230D1B205* .34 .78 24 230D1C205* .45 1.15 22
3.0 230D1Z305* - - - 230D1B305* .41 .78 22 230D1C305* .55 1.15 20
4.0 230D1Z405* - - - 230D1B405* .38 .90 22 230D1C405* .55 1.40 20
5.0 230D1Z505* - - - 230D1B505* .36 1.15 22 230D1C505* .55 1.65 20
6.0 230D1Z605* - - - 230D1B605* .39 1.15 22 230D1C605* .59 1.65 20
8.0 230D1Z805* - - - 230D1B805* .45 1.15 22 230D1C805* .64 1.90 20
10.0 230D1Z106* - - - 230D1B106* .57 1.15 20 230D1C106* .81 1.90 20
12.0 230D1Z126* - - - 230D1B126* .62 1.15 20 230D1C126* .89 1.90 20
15.0 230D1Z156* - - - 230D1B156* .61 1.40 20 230D1C156* .98 1.90 20
18.0 230D1Z186* - - - 230D1B186* .66 1.40 20 230D1C186* 1.06 1.90 20
20.0 230D1Z206* - - - 230D1B206* .63 1.65 20 230D1C206* 1.12 1.90 20
30.0 230D1Z306* - - - 230D1B306* .70 1.90 20 230D1C306* - - -
40.0 230D1Z406* - - - 230D1B406* .83 1.90 20 230D1C406* - - -
50.0 230D1Z506* - - - 230D1B506* .90 1.90 20 230D1C506* - - -
DIMENSIONS LEAD DIMENSIONS LEAD DIMENSIONS LEAD
SIZE SIZE SIZE
MFD PART NO. D L (AWG) PART NO. D L (AWG) PART NO. D L (AWG)
35 VOLT DC 100 VOLT DC 200 VOLT DC
*Add tolerance designator to complete part number: F = ±1%, G = ±2%, J = ±5%, K = ±10%, M = ±20%
WRAP AND FILL
ROUND CONFIGURATION
For max. D and L dimensions, allow +.050”. LEAD LENGTH: 2.0” ± .50”
PLEASE CONSULT FACTORY
3366 Pomona Blvd. • Pomona, CA 91768 • TEL: (909) 595-4037 • FAX: (909) 595-0186
e-mail: esales@electrocube.com • Internet: www.electrocube.com • (IR: 9/99)
®
®
METALLIZED POLYESTER
230D SERIES
.0010 230D1E102* .15 .40 24 230D1F102* .15 .40 24 230D1G102* .15 .40 24
.0012 230D1E122* .15 .40 24 230D1F122* .15 .40 24 230D1G122* .15 .40 24
.0015 230D1E152* .15 .40 24 230D1F152* .15 .40 24 230D1G152* .15 .40 24
.0018 230D1E182* .15 .40 24 230D1F182* .15 .40 24 230D1G182* .15 .40 24
.0022 230D1E222* .15 .40 24 230D1F222* .15 .40 24 230D1G222* .15 .40 24
.0027 230D1E272* .15 .40 24 230D1F272* .16 .40 24 230D1G272* .15 .40 24
.0033 230D1E332* .15 .40 24 230D1F332* .15 .56 24 230D1G332* .15 .40 24
.0039 230D1E392* .15 .40 24 230D1F392* .15 .56 24 230D1G392* .15 .40 24
.0047 230D1E472* .15 .40 24 230D1F472* .15 .56 24 230D1G472* .15 .40 24
.0056 230D1E562* .16 .40 24 230D1F562* .15 .56 24 230D1G562* .15 .40 24
.0068 230D1E682* .17 .40 24 230D1F682* .17 .56 24 230D1G682* .15 .40 24
.0082 230D1E822* .15 .53 24 230D1F822* .18 .56 24 230D1G822* .15 .40 24
.010 230D1E103* .15 .53 24 230D1F103* .20 .56 24 230D1G103* .26 .95 24
.012 230D1E123* .15 .53 24 230D1F123* .21 .56 24 230D1G123* .27 .95 24
.015 230D1E153* .15 .53 24 230D1F153* .24 .56 24 230D1G153* .31 .95 24
.018 230D1E183* .17 .53 24 230D1F183* .26 .56 24 230D1G183* .34 .95 22
.022 230D1E223* .18 .53 24 230D1F223* .28 .56 24 230D1G223* .33 1.21 22
.027 230D1E273* .20 .53 24 230D1F273* .26 .68 24 230D1G273* .36 1.21 22
.033 230D1E333* .22 .53 24 230D1F333* .28 .68 24 230D1G333* .41 1.21 22
.039 230D1E393* .23 .53 24 230D1F393* .26 .78 24 230D1G393* .42 1.21 22
.047 230D1E473* .25 .53 24 230D1F473* .28 .78 24 230D1G473* .43 1.21 22
.056 230D1E563* .28 .53 24 230D1F563* .31 .78 24 230D1G563* .47 1.21 22
.068 230D1E683* .24 .65 24 230D1F683* .34 .78 24 230D1G683* .51 1.21 22
.082 230D1E823* .26 .65 24 230D1F823* .37 .78 22 230D1G823* .56 1.21 22
.10 230D1E104* .28 .65 24 230D1F104* .37 .95 22 230D1G104* .62 1.21 22
.12 230D1E124* .26 .78 24 230D1F124* .35 1.17 22 230D1G124* .67 1.21 22
.15 230D1E154* .29 .78 24 230D1F154* .38 1.17 22 230D1G154* .68 1.46 20
.18 230D1E184* .32 .78 24 230D1F184* .42 1.17 22 230D1G184* .74 1.46 20
.22 230D1E224* .35 .78 22 230D1F224* .46 1.17 22 230D1G224* .84 1.46 20
.27 230D1E274* .39 .78 22 230D1F274* .51 1.17 20 230D1G274* .90 1.46 20
.33 230D1E334* .38 .90 22 230D1F334* .55 1.17 20 230D1G334* .91 1.72 20
.39 230D1E394* .36 1.15 22 230D1F394* .53 1.45 20 230D1G394* .92 1.96 20
.47 230D1E474* .39 1.15 22 230D1F474* .59 1.45 20 230D1G474* .91 2.25 20
.56 230D1E564* .42 1.15 22 230D1F564* .57 1.70 20 230D1G564* - - -
.68 230D1E684* .46 1.15 22 230D1F684* .58 1.90 20 230D1G684* - - -
.82 230D1E824* .50 1.15 20 230D1F824* .64 1.90 20 230D1G824* - - -
1.0 230D1E105* .55 1.15 20 230D1F105* .70 1.90 20 230D1G105* - - -
1.2 230D1E125* .53 1.40 20 230D1F125* .76 1.90 20 230D1G125* - - -
1.5 230D1E155* .59 1.40 20 230D1F155* .85 1.90 20 230D1G155* - - -
1.8 230D1E185* .58 1.65 20 230D1F185* .93 1.90 20 230D1G185* - - -
2.0 230D1E205* .56 1.90 20 230D1F205* .99 1.90 20 230D1G205* - - -
3.0 230D1E305* .68 1.90 20 230D1F305* 1.06 2.21 20 230D1G305* - - -
4.0 230D1E405* .78 1.90 20 230D1F405* 1.20 2.21 20 230D1G405* - - -
5.0 230D1E505* .87 1.90 20 230D1F505* 1.35 2.21 18 230D1G505* - - -
6.0 230D1E605* .91 1.90 20 230D1F605* - - - 230D1G605* - - -
8.0 230D1E805* 1.05 1.90 20 230D1F805* - - - 230D1G805* - - -
10.0 230D1E106* 1.12 2.21 20 230D1F106* - - - 230D1G106* - - -
12.0 230D1E126* - - - 230D1F126* - - - 230D1G126* - - -
15.0 230D1E156* - - - 230D1F156* - - - 230D1G156* - - -
18.0 230D1E186* - - - 230D1F186* - - - 230D1G186* - - -
20.0 230D1E206* - - - 230D1F206* - - - 230D1G206* - - -
30.0 230D1E306* - - - 230D1F306* - - - 230D1G306* - - -
40.0 230D1E406* - - - 230D1F406* - - - 230D1G406* - - -
50.0 230D1E506* - - - 230D1F506* - - - 230D1G506* - - -
DIMENSIONS LEAD DIMENSIONS LEAD DIMENSIONS LEAD
SIZE SIZE SIZE
MFD PART NO. D L (AWG) PART NO. D L (AWG) PART NO. D L (AWG)
400 VOLT DC 600 VOLT DC 1000 VOLT DC
*Add tolerance designator to complete part number: F = ±1%, G = ±2%, J = ±5%, K = ±10%, M = ±20%
WRAP AND FILL
ROUND CONFIGURATION
For D and L dimensions, allow +.050”. LEAD LENGTH: 2.0” ± .50”
3366 Pomona Blvd. • Pomona, CA 91768 • TEL: (909) 595-4037 • FAX: (909) 595-0186
e-mail: esales@electrocube.com • Internet: www.electrocube.com • (A:05/03)
®
®
METALLIZED POLYESTER
231A SERIES
.0010 231A1Z102* .17 .29 .42 26 231A1B102* .17 .29 .42 26 231A1C102* .17 .29 .42 26
.0015 231A1Z152* .17 .29 .42 26 231A1B152* .17 .29 .42 26 231A1C152* .17 .29 .42 26
.0018 231A1Z182* .17 .29 .42 26 231A1B182* .17 .29 .42 26 231A1C182* .17 .29 .42 26
.0022 231A1Z222* .17 .29 .42 26 231A1B222* .17 .29 .42 26 231A1C222* .17 .29 .42 26
.0027 231A1Z272* .17 .29 .42 26 231A1B272* .17 .29 .42 26 231A1C272* .17 .29 .42 26
.0033 231A1Z332* .17 .29 .42 26 231A1B332* .17 .29 .42 26 231A1C332* .17 .29 .42 26
.0039 231A1Z392* .17 .29 .42 26 231A1B392* .17 .29 .42 26 231A1C392* .17 .29 .42 26
.0047 231A1Z472* .17 .29 .42 26 231A1B472* .17 .29 .42 26 231A1C472* .17 .29 .42 26
.0056 231A1Z562* .17 .29 .42 26 231A1B562* .17 .29 .42 26 231A1C562* .17 .29 .42 26
.0068 231A1Z682* .17 .29 .42 26 231A1B682* .17 .29 .42 26 231A1C682* .17 .29 .42 26
.0082 231A1Z822* .17 .29 .42 26 231A1B822* .17 .29 .42 26 231A1C822* .17 .29 .42 26
.010 231A1Z103* .17 .29 .42 26 231A1B103* .17 .29 .42 26 231A1C103* .17 .29 .42 26
.012 231A1Z123* .17 .29 .42 26 231A1B123* .17 .29 .42 26 231A1C123* .17 .29 .42 26
.015 231A1Z153* .17 .29 .42 26 231A1B153* .17 .29 .42 26 231A1C153* .17 .29 .42 26
.018 231A1Z183* .17 .29 .42 26 231A1B183* .17 .29 .42 26 231A1C183* .17 .29 .42 26
.022 231A1Z223* .17 .29 .42 26 231A1B223* .17 .29 .42 26 231A1C223* .17 .29 .55 26
.027 231A1Z273* .17 .29 .42 26 231A1B273* .17 .29 .42 26 231A1C273* .17 .29 .55 26
.033 231A1Z333* .17 .29 .42 26 231A1B333* .17 .29 .42 26 231A1C333* .17 .29 .55 26
.039 231A1Z393* .17 .29 .42 26 231A1B393* .17 .29 .42 26 231A1C393* .17 .29 .55 26
.047 231A1Z473* .17 .29 .42 26 231A1B473* .17 .29 .42 26 231A1C473* .17 .29 .55 26
.056 231A1Z563* .17 .29 .42 26 231A1B563* .17 .29 .42 26 231A1C563* .17 .29 .55 26
.068 231A1Z683* .17 .29 .42 26 231A1B683* .17 .29 .42 26 231A1C683* .23 .36 .55 26
.082 231A1Z823* .17 .29 .42 26 231A1B823* .17 .29 .42 26 231A1C823* .23 .36 .55 26
.10 231A1Z104* .17 .29 .42 26 231A1B104* .17 .29 .55 26 231A1C104* .23 .36 .55 26
.12 231A1Z124* .17 .29 .42 26 231A1B124* .17 .29 .55 26 231A1C124* .23 .36 .55 26
.15 231A1Z154* .17 .29 .42 26 231A1B154* .17 .29 .55 26 231A1C154* .29 .42 .55 24
.18 231A1Z184* .17 .29 .42 26 231A1B184* .17 .29 .55 26 231A1C184* .29 .42 .55 24
.22 231A1Z224* .17 .29 .42 26 231A1B224* .17 .29 .55 26 231A1C224* .29 .42 .67 24
.27 231A1Z274* .23 .36 .42 26 231A1B274* .23 .36 .55 26 231A1C274* .29 .42 .67 24
.33 231A1Z334* .23 .36 .42 26 231A1B334* .23 .36 .55 26 231A1C334* .29 .42 .67 24
.39 231A1Z394* .23 .36 .42 26 231A1B394* .23 .36 .55 26 231A1C394* .29 .42 .82 24
.47 231A1Z474* .23 .36 .42 26 231A1B474* .23 .36 .55 26 231A1C474* .39 .54 .82 22
.56 231A1Z564* .17 .29 .55 26 231A1B564* .29 .42 .55 24 231A1C564* .39 .54 .82 22
.68 231A1Z684* .23 .36 .55 24 231A1B684* .29 .42 .55 24 231A1C684* .39 .54 .82 22
.82 231A1Z824* .23 .36 .55 24 231A1B824* .29 .42 .67 24 231A1C824* .39 .54 .82 22
1.0 231A1Z105* .23 .36 .55 24 231A1B105* .29 .42 .67 24 231A1C105* .39 .54 1.04 22
1.2 231A1Z125* .29 .42 .55 24 231A1B125* .29 .42 .67 24 231A1C125* .39 .54 1.24 22
1.5 231A1Z155* .29 .42 .55 24 231A1B155* .29 .42 .82 24 231A1C155* .39 .54 1.24 22
1.8 231A1Z185* .29 .42 .55 24 231A1B185* .29 .42 .82 24 231A1C185* .39 .54 1.24 22
2.0 231A1Z205* .29 .42 .67 24 231A1B205* .39 .54 .82 22 231A1C205* .56 .72 1.24 20
3.0 231A1Z305* .29 .42 .67 24 231A1B305* .39 .54 .82 22 231A1C305* .56 .72 1.24 20
4.0 231A1Z405* .39 .54 .82 24 231A1B405* .39 .54 1.04 22 231A1C405* .56 .72 1.50 20
5.0 231A1Z505* .39 .54 .82 24 231A1B505* .39 .54 1.24 22 231A1C505* .56 .72 1.75 20
6.0 231A1Z605* .39 .54 .82 24 231A1B605* .39 .54 1.24 22 231A1C605* .76 .96 2.10 20
8.0 231A1Z805* .50 .68 1.04 22 231A1B805* .56 .72 1.24 20 231A1C805* .76 .96 2.10 20
10.0 231A1Z106* .50 .68 1.04 22 231A1B106* .56 .72 1.24 20 231A1C106* - - - -
15.0 231A1Z156* .50 .68 1.24 22 231A1B156* .56 .72 1.50 20 231A1C156* - - - -
18.0 231A1Z186* .50 .68 1.24 22 231A1B186* - - - - 231A1C186* - - - -
20.0 231A1Z206* .50 .68 1.24 22 231A1B206* - - - - 231A1C206* - - - -
30.0 231A1Z306* .58 .79 1.24 20 231A1B306* - - - - 231A1C306* - - - -
40.0 231A1Z406* .76 .96 1.24 20 231A1B406* - - - - 231A1C406* - - - -
50.0 231A1Z506* .76 .96 1.40 20 231A1B506* - - - - 231A1C506* - - - -
75.0 231A1Z756* .76 .96 1.65 20 231A1B756* - - - - 231A1C756* - - - -
100.0 231A1Z1006* .76 .96 2.10 18 231A1B1006* - - - - 231A1C1006* - - - -
DIMENSIONS LEAD DIMENSIONS LEAD DIMENSIONS LEAD
SIZE SIZE SIZE
MFD PART NO. T W L (AWG) PART NO. T W L (AWG) PART NO. T W L (AWG)
35 VOLT DC 100 VOLT DC 200 VOLT DC
*Add tolerance designator to complete part number: F = ±1%, G = ±2%, J = ±5%, K = ±10%, M = ±20%
EPOXY CASE
RECTANGULAR
CONFIGURATION
For max. T and W dimensions, allow + .010”.
For max. L dimension, allow + .030”. LEAD LENGTH: 2.0” ± .50”
3366 Pomona Blvd. • Pomona, CA 91768 • TEL: (909) 595-4037 • FAX: (909) 595-0186
e-mail: esales@electrocube.com • Internet: www.electrocube.com • (IR: 9/99)
®
®
METALLIZED POLYESTER
231A SERIES
.0010 231A1Z102* .17 .29 .42 26 231A1B102* .17 .29 .42 26 231A1C102* .17 .29 .42 26
.0015 231A1Z152* .17 .29 .42 26 231A1B152* .17 .29 .42 26 231A1C152* .17 .29 .42 26
.0018 231A1Z182* .17 .29 .42 26 231A1B182* .17 .29 .42 26 231A1C182* .17 .29 .42 26
.0022 231A1Z222* .17 .29 .42 26 231A1B222* .17 .29 .42 26 231A1C222* .17 .29 .42 26
.0027 231A1Z272* .17 .29 .42 26 231A1B272* .17 .29 .42 26 231A1C272* .17 .29 .42 26
.0033 231A1Z332* .17 .29 .42 26 231A1B332* .17 .29 .42 26 231A1C332* .17 .29 .42 26
.0039 231A1Z392* .17 .29 .42 26 231A1B392* .17 .29 .42 26 231A1C392* .17 .29 .42 26
.0047 231A1Z472* .17 .29 .42 26 231A1B472* .17 .29 .42 26 231A1C472* .17 .29 .42 26
.0056 231A1Z562* .17 .29 .42 26 231A1B562* .17 .29 .42 26 231A1C562* .17 .29 .42 26
.0068 231A1Z682* .17 .29 .42 26 231A1B682* .17 .29 .42 26 231A1C682* .17 .29 .42 26
.0082 231A1Z822* .17 .29 .42 26 231A1B822* .17 .29 .42 26 231A1C822* .17 .29 .42 26
.010 231A1Z103* .17 .29 .42 26 231A1B103* .17 .29 .42 26 231A1C103* .17 .29 .42 26
.012 231A1Z123* .17 .29 .42 26 231A1B123* .17 .29 .42 26 231A1C123* .17 .29 .42 26
.015 231A1Z153* .17 .29 .42 26 231A1B153* .17 .29 .42 26 231A1C153* .17 .29 .42 26
.018 231A1Z183* .17 .29 .42 26 231A1B183* .17 .29 .42 26 231A1C183* .17 .29 .42 26
.022 231A1Z223* .17 .29 .42 26 231A1B223* .17 .29 .42 26 231A1C223* .17 .29 .55 26
.027 231A1Z273* .17 .29 .42 26 231A1B273* .17 .29 .42 26 231A1C273* .17 .29 .55 26
.033 231A1Z333* .17 .29 .42 26 231A1B333* .17 .29 .42 26 231A1C333* .17 .29 .55 26
.039 231A1Z393* .17 .29 .42 26 231A1B393* .17 .29 .42 26 231A1C393* .17 .29 .55 26
.047 231A1Z473* .17 .29 .42 26 231A1B473* .17 .29 .42 26 231A1C473* .17 .29 .55 26
.056 231A1Z563* .17 .29 .42 26 231A1B563* .17 .29 .42 26 231A1C563* .17 .29 .55 26
.068 231A1Z683* .17 .29 .42 26 231A1B683* .17 .29 .42 26 231A1C683* .23 .36 .55 26
.082 231A1Z823* .17 .29 .42 26 231A1B823* .17 .29 .42 26 231A1C823* .23 .36 .55 26
.10 231A1Z104* .17 .29 .42 26 231A1B104* .17 .29 .55 26 231A1C104* .23 .36 .55 26
.12 231A1Z124* .17 .29 .42 26 231A1B124* .17 .29 .55 26 231A1C124* .23 .36 .55 26
.15 231A1Z154* .17 .29 .42 26 231A1B154* .17 .29 .55 26 231A1C154* .29 .42 .55 24
.18 231A1Z184* .17 .29 .42 26 231A1B184* .17 .29 .55 26 231A1C184* .29 .42 .55 24
.22 231A1Z224* .17 .29 .42 26 231A1B224* .17 .29 .55 26 231A1C224* .29 .42 .67 24
.27 231A1Z274* .23 .36 .42 26 231A1B274* .23 .36 .55 26 231A1C274* .29 .42 .67 24
.33 231A1Z334* .23 .36 .42 26 231A1B334* .23 .36 .55 26 231A1C334* .29 .42 .67 24
.39 231A1Z394* .23 .36 .42 26 231A1B394* .23 .36 .55 26 231A1C394* .29 .42 .82 24
.47 231A1Z474* .23 .36 .42 26 231A1B474* .23 .36 .55 26 231A1C474* .39 .54 .82 22
.56 231A1Z564* .17 .29 .55 26 231A1B564* .29 .42 .55 24 231A1C564* .39 .54 .82 22
.68 231A1Z684* .23 .36 .55 24 231A1B684* .29 .42 .55 24 231A1C684* .39 .54 .82 22
.82 231A1Z824* .23 .36 .55 24 231A1B824* .29 .42 .67 24 231A1C824* .39 .54 .82 22
1.0 231A1Z105* .23 .36 .55 24 231A1B105* .29 .42 .67 24 231A1C105* .39 .54 1.04 22
1.2 231A1Z125* .29 .42 .55 24 231A1B125* .29 .42 .67 24 231A1C125* .39 .54 1.24 22
1.5 231A1Z155* .29 .42 .55 24 231A1B155* .29 .42 .82 24 231A1C155* .39 .54 1.24 22
1.8 231A1Z185* .29 .42 .55 24 231A1B185* .29 .42 .82 24 231A1C185* .39 .54 1.24 22
2.0 231A1Z205* .29 .42 .67 24 231A1B205* .39 .54 .82 22 231A1C205* .56 .72 1.24 20
3.0 231A1Z305* .29 .42 .67 24 231A1B305* .39 .54 .82 22 231A1C305* .56 .72 1.24 20
4.0 231A1Z405* .39 .54 .82 24 231A1B405* .39 .54 1.04 22 231A1C405* .56 .72 1.50 20
5.0 231A1Z505* .39 .54 .82 24 231A1B505* .39 .54 1.24 22 231A1C505* .56 .72 1.75 20
6.0 231A1Z605* .39 .54 .82 24 231A1B605* .39 .54 1.24 22 231A1C605* .76 .96 2.10 20
8.0 231A1Z805* .50 .68 1.04 22 231A1B805* .56 .72 1.24 20 231A1C805* .76 .96 2.10 20
10.0 231A1Z106* .50 .68 1.04 22 231A1B106* .56 .72 1.24 20 231A1C106* - - - -
15.0 231A1Z156* .50 .68 1.24 22 231A1B156* .56 .72 1.50 20 231A1C156* - - - -
18.0 231A1Z186* .50 .68 1.24 22 231A1B186* - - - - 231A1C186* - - - -
20.0 231A1Z206* .50 .68 1.24 22 231A1B206* - - - - 231A1C206* - - - -
30.0 231A1Z306* .58 .79 1.24 20 231A1B306* - - - - 231A1C306* - - - -
40.0 231A1Z406* .76 .96 1.24 20 231A1B406* - - - - 231A1C406* - - - -
50.0 231A1Z506* .76 .96 1.40 20 231A1B506* - - - - 231A1C506* - - - -
75.0 231A1Z756* .76 .96 1.65 20 231A1B756* - - - - 231A1C756* - - - -
100.0 231A1Z1006* .76 .96 2.10 18 231A1B1006* - - - - 231A1C1006* - - - -
DIMENSIONS LEAD DIMENSIONS LEAD DIMENSIONS LEAD
SIZE SIZE SIZE
MFD PART NO. T W L (AWG) PART NO. T W L (AWG) PART NO. T W L (AWG)
35 VOLT DC 100 VOLT DC 200 VOLT DC
*Add tolerance designator to complete part number: F = ±1%, G = ±2%, J = ±5%, K = ±10%, M = ±20%
EPOXY CASE
RECTANGULAR
CONFIGURATION
For max. T and W dimensions, allow + .010”.
For max. L dimension, allow + .030”. LEAD LENGTH: 2.0” ± .50”
3366 Pomona Blvd. • Pomona, CA 91768 • TEL: (909) 595-4037 • FAX: (909) 595-0186
e-mail: esales@electrocube.com • Internet: www.electrocube.com • (IR: 9/99)
®
®
METALLIZED POLYESTER
232A SERIES
.0010 232A1Z102* .18 .30 .42 .300 22 232A1B102* .18 .30 .42 .300 22 232A1C102* .18 .30 .42 .300 22
.0015 232A1Z152* .18 .30 .42 .300 22 232A1B152* .18 .30 .42 .300 22 232A1C152* .18 .30 .42 .300 22
.0018 232A1Z182* .18 .30 .42 .300 22 232A1B182* .18 .30 .42 .300 22 232A1C182* .18 .30 .42 .300 22
.0022 232A1Z222* .18 .30 .42 .300 22 232A1B222* .18 .30 .42 .300 22 232A1C222* .18 .30 .42 .300 22
.0027 232A1Z272* .18 .30 .42 .300 22 232A1B272* .18 .30 .42 .300 22 232A1C272* .18 .30 .42 .300 22
.0033 232A1Z332* .18 .30 .42 .300 22 232A1B332* .18 .30 .42 .300 22 232A1C332* .18 .30 .42 .300 22
.0039 232A1Z392* .18 .30 .42 .300 22 232A1B392* .18 .30 .42 .300 22 232A1C392* .18 .30 .42 .300 22
.0047 232A1Z472* .18 .30 .42 .300 22 232A1B472* .18 .30 .42 .300 22 232A1C472* .18 .30 .42 .300 22
.0056 232A1Z562* .18 .30 .42 .300 22 232A1B562* .18 .30 .42 .300 22 232A1C562* .18 .30 .42 .300 22
.0068 232A1Z682* .18 .30 .42 .300 22 232A1B682* .18 .30 .42 .300 22 232A1C682* .18 .30 .42 .300 22
.0082 232A1Z822* .18 .30 .42 .300 22 232A1B822* .18 .30 .42 .300 22 232A1C822* .18 .30 .42 .300 22
.010 232A1Z103* .18 .30 .42 .300 22 232A1B103* .18 .30 .42 .300 22 232A1C103* .18 .30 .42 .300 22
.012 232A1Z123* .18 .30 .42 .300 22 232A1B123* .18 .30 .42 .300 22 232A1C123* .18 .30 .42 .300 22
.015 232A1Z153* .18 .30 .42 .300 22 232A1B153* .18 .30 .42 .300 22 232A1C153* .18 .30 .42 .300 22
.018 232A1Z183* .18 .30 .42 .300 22 232A1B183* .18 .30 .42 .300 22 232A1C183* .18 .30 .42 .300 22
.022 232A1Z223* .18 .30 .42 .300 22 232A1B223* .18 .30 .42 .300 22 232A1C223* .18 .30 .55 .400 22
.027 232A1Z273* .18 .30 .42 .300 22 232A1B273* .18 .30 .42 .300 22 232A1C273* .18 .30 .55 .400 22
.033 232A1Z333* .18 .30 .42 .300 22 232A1B333* .18 .30 .42 .300 22 232A1C333* .18 .30 .55 .400 22
.039 232A1Z393* .18 .30 .42 .300 22 232A1B393* .18 .30 .42 .300 22 232A1C393* .18 .30 .55 .400 22
.047 232A1Z473* .18 .30 .42 .300 22 232A1B473* .18 .30 .42 .300 22 232A1C473* .18 .30 .55 .400 22
.056 232A1Z563* .18 .30 .42 .300 22 232A1B563* .18 .30 .42 .300 22 232A1C563* .18 .30 .55 .400 22
.068 232A1Z683* .18 .30 .42 .300 22 232A1B683* .18 .30 .42 .300 22 232A1C683* .18 .30 .55 .400 22
.082 232A1Z823* .18 .30 .42 .300 22 232A1B823* .18 .30 .42 .300 22 232A1C823* .24 .37 .55 .400 22
.10 232A1Z104* .18 .30 .42 .300 22 232A1B104* .18 .30 .55 .400 22 232A1C104* .24 .37 .55 .400 22
.12 232A1Z124* .18 .30 .42 .300 22 232A1B124* .18 .30 .55 .400 22 232A1C124* .24 .37 .55 .400 22
.15 232A1Z154* .18 .30 .42 .300 22 232A1B154* .18 .30 .55 .400 22 232A1C154* .30 .43 .55 .400 22
.18 232A1Z184* .18 .30 .42 .300 22 232A1B184* .18 .30 .55 .400 22 232A1C184* .30 .43 .55 .400 22
.22 232A1Z224* .18 .30 .42 .300 22 232A1B224* .18 .30 .55 .400 22 232A1C224* .30 .43 .67 .500 22
.27 232A1Z274* .18 .30 .42 .300 22 232A1B274* .18 .30 .55 .400 22 232A1C274* .30 .43 .67 .500 22
.33 232A1Z334* .18 .30 .42 .300 22 232A1B334* .24 .37 .55 .400 22 232A1C334* .30 .43 .67 .500 22
.39 232A1Z394* .18 .30 .55 .400 22 232A1B394* .24 .37 .55 .400 22 232A1C394* .30 .43 .82 .600 22
.47 232A1Z474* .18 .30 .55 .400 22 232A1B474* .24 .37 .55 .400 22 232A1C474* .30 .43 .82 .600 22
.56 232A1Z564* .18 .30 .55 .400 22 232A1B564* .30 .43 .55 .400 22 232A1C564* .40 .55 .82 .600 20
.68 232A1Z684* .24 .30 .55 .400 22 232A1B684* .30 .43 .55 .400 22 232A1C684* .40 .55 .82 .600 20
.82 232A1Z824* .24 .37 .55 .400 22 232A1B824* .30 .43 .67 .500 22 232A1C824* .40 .55 .82 .600 20
1.0 232A1Z105* .24 .37 .55 .400 22 232A1B105* .30 .43 .67 .500 22 232A1C105* .40 .55 1.04 .800 20
1.2 232A1Z125* .24 .37 .55 .400 22 232A1B125* .30 .43 .67 .500 22 232A1C125* .40 .55 1.24 1.100 20
1.5 232A1Z155* .30 .43 .55 .400 22 232A1B155* .30 .43 .82 .600 22 232A1C155* .40 .55 1.24 1.100 20
1.8 232A1Z185* .30 .43 .55 .400 22 232A1B185* .30 .43 .82 .600 22 232A1C185* .40 .55 1.24 1.100 20
2.0 232A1Z205* .30 .43 .55 .400 22 232A1B205* .40 .55 .82 .600 20 232A1C205* .57 .73 1.24 1.100 20
3.0 232A1Z305* .30 .43 .67 .500 22 232A1B305* .40 .55 .82 .600 20 232A1C305* .57 .73 1.24 1.100 20
4.0 232A1Z405* .30 .43 .82 .600 22 232A1B405* .40 .55 1.04 .800 20 232A1C405* .57 .73 1.75 1.600 20
5.0 232A1Z505* .40 .55 .82 .600 22 232A1B505* .40 .55 1.24 1.100 20 232A1C505* .57 .73 1.75 1.600 20
6.0 232A1Z605* .40 .55 .82 .600 20 232A1B605* .40 .55 1.24 1.100 20 232A1C605* .75 .90 1.75 1.600 20
8.0 232A1Z805* .40 .55 1.04 .800 20 232A1B805* .57 .73 1.24 1.100 20 232A1C805* .75 .90 1.95 1.800 20
10.0 232A1Z106* .40 .59 1.04 .800 20 232A1B106* .57 .73 1.24 1.100 20 232A1C106* .75 .90 1.95 1.800 20
15.0 232A1Z156* .57 .73 1.24 1.100 20 232A1B156* .57 .73 1.75 1.600 20 232A1C156* - - - - -
18.0 232A1Z186* .57 .73 1.24 1.100 20 232A1B186* .57 .73 1.75 1.600 20 232A1C186* - - - - -
20.0 232A1Z206* .57 .78 1.24 1.100 20 232A1B206* .57 .73 1.75 1.600 20 232A1C206* - - - - -
DIMENSIONS LEAD DIMENSIONS LEAD DIMENSIONS LEAD
SIZE SIZE SIZE
MFD PART NO. T H L S (AWG) PART NO. T H L S (AWG) PART NO. T H L S (AWG)
35 VOLT DC 100 VOLT DC 200 VOLT DC
*Add tolerance designator to complete part number: F = ±1%, G = ±2%, J = ±5%, K = ±10%, M = ±20%
EPOXY CASE
RECTANGULAR
CONFIGURATION
For max. T, H and L dimensions, allow +.010”.
For max. S dimensions, allow +.015”.
3366 Pomona Blvd.• Pomona, CA 91768 • TEL: (909) 595-4037 • FAX: (909) 595-0186
e-mail: esales@electrocube.com • Internet: www.electrocube.com • (B: 11/06)
®
®
METALLIZED POLYESTER
232A SERIES
.0010 232A1E102* .18 .30 .42 .300 22 232A1F102* .18 .30 .42 .300 22 232A1G102*
.0015 232A1E152* .18 .30 .42 .300 22 232A1F152* .18 .30 .42 .300 22 232A1G152*
.0018 232A1E182* .18 .30 .42 .300 22 232A1F182* .18 .30 .42 .300 22 232A1G182*
.0022 232A1E222* .18 .30 .42 .300 22 232A1F222* .18 .30 .42 .300 22 232A1G222*
.0027 232A1E272* .18 .30 .42 .300 22 232A1F272* .18 .30 .42 .300 22 232A1G272*
.0033 232A1E332* .18 .30 .42 .300 22 232A1F332* .18 .30 .55 .400 22 232A1G332*
.0039 232A1E392* .18 .30 .42 .300 22 232A1F392* .18 .30 .55 .400 22 232A1G392*
.0047 232A1E472* .18 .30 .42 .300 22 232A1F472* .18 .30 .55 .400 22 232A1G472*
.0056 232A1E562* .18 .30 .42 .300 22 232A1F562* .18 .30 .55 .400 22 232A1G562*
.0068 232A1E682* .18 .30 .42 .300 22 232A1F682* .18 .30 .55 .400 22 232A1G682*
.0082 232A1E822* .18 .30 .55 .400 22 232A1F822* .18 .30 .55 .400 22 232A1G822*
.010 232A1E103* .18 .30 .55 .400 22 232A1F103* .24 .37 .55 .400 22 232A1G103*
.012 232A1E123* .18 .30 .55 .400 22 232A1F123* .24 .37 .55 .400 22 232A1G123*
.015 232A1E153* .18 .30 .55 .400 22 232A1F153* .24 .37 .55 .400 22 232A1G153*
.018 232A1E183* .18 .30 .55 .400 22 232A1F183* .30 .43 .55 .400 22 232A1G183*
.022 232A1E223* .18 .30 .55 .400 22 232A1F223* .30 .43 .55 .400 22 232A1G223*
.027 232A1E273* .24 .37 .55 .400 22 232A1F273* .30 .43 .67 .500 22 232A1G273*
.033 232A1E333* .24 .37 .55 .400 22 232A1F333* .30 .43 .67 .500 22 232A1G333*
.039 232A1E393* .24 .37 .55 .400 22 232A1F393* .30 .43 .82 .600 22 232A1G393*
.047 232A1E473* .30 .43 .55 .400 22 232A1F473* .30 .43 .82 .600 22 232A1G473*
.056 232A1E563* .30 .43 .55 .400 22 232A1F563* .40 .55 .82 .600 20 232A1G563*
.068 232A1E683* .30 .43 .67 .500 22 232A1F683* .40 .55 .82 .600 20 232A1G683*
.082 232A1E823* .30 .43 .67 .500 22 232A1F823* .40 .55 .82 .600 20 232A1G823*
.10 232A1E104* .30 .43 .67 .500 22 232A1F104* .40 .55 1.04 .800 20 232A1G104*
.12 232A1E124* .30 .43 .82 .600 22 232A1F124* .40 .55 1.24 1.100 20 232A1G124*
.15 232A1E154* .30 .43 .82 .600 22 232A1F154* .40 .55 1.24 1.100 20 232A1G154*
.18 232A1E184* .40 .55 .82 .600 20 232A1F184* .40 .55 1.24 1.100 20 232A1G184*
.22 232A1E224* .40 .55 .82 .600 20 232A1F224* .57 .73 1.24 1.100 20 232A1G224*
.27 232A1E274* .40 .55 .82 .600 20 232A1F274* .57 .73 1.24 1.100 20 232A1G274*
.33 232A1E334* .40 .55 1.04 .800 20 232A1F334* .57 .73 1.24 1.100 20 232A1G334*
.39 232A1E394* .40 .55 1.24 1.100 20 232A1F394* .57 .73 1.75 1.600 20 232A1G394*
.47 232A1E474* .40 .55 1.24 1.100 20 232A1F474* .57 .73 1.75 1.600 20 232A1G474*
.56 232A1E564* .40 .55 1.24 1.100 20 232A1F564* .57 .73 1.75 1.600 20 232A1G564*
.68 232A1E684* .57 .73 1.24 1.100 20 232A1F684* - - - - - 232A1G684*
.82 232A1E824* .57 .73 1.24 1.100 20 232A1F824* - - - - - 232A1G824*
1.0 232A1E105* .57 .73 1.24 1.100 20 232A1F105* - - - - - 232A1G105*
1.2 232A1E125* .57 .73 1.75 1.600 20 232A1F125* - - - - - 232A1G125*
1.5 232A1E155* .57 .73 1.75 1.600 20 232A1F155* - - - - - 232A1G155*
1.8 232A1E185* .57 .73 1.75 1.600 20 232A1F185* - - - - - 232A1G185*
2.0 232A1E205* - - - - - 232A1F205* - - - - - 232A1G205*
3.0 232A1E305* - - - - - 232A1F305* - - - - - 232A1G305*
4.0 232A1E405* - - - - - 232A1F405* - - - - - 232A1G405*
5.0 232A1E505* - - - - - 232A1F505* - - - - - 232A1G505*
6.0 232A1E605* - - - - - 232A1F605* - - - - - 232A1G605*
8.0 232A1E805* - - - - - 232A1F805* - - - - - 232A1G805*
10.0 232A1E106* - - - - - 232A1F106* - - - - - 232A1G106*
15.0 232A1E156* - - - - - 232A1F156* - - - - - 232A1G156*
18.0 232A1E186* - - - - - 232A1F186* - - - - - 232A1G186*
20.0 232A1E206* - - - - - 232A1F206* - - - - - 232A1G206*
DIMENSIONS LEAD DIMENSIONS LEAD DIMENSIONS LEAD
SIZE SIZE SIZE
MFD PART NO. T H L S (AWG) PART NO. T H L S (AWG) PART NO. T H L S (AWG)
400 VOLT DC 600 VOLT DC 1000 VOLT DC
*Add tolerance designator to complete part number: F = ±1%, G = ±2%, J = ±5%, K = ±10%, M = ±20%
EPOXY CASE
RECTANGULAR
CONFIGURATION
For max. T, H and L dimensions, allow +.010”.
For max. S dimensions, allow +.015”.
PLEASE CONSULT FACTORY
3366 Pomona Blvd. • Pomona, CA 91768 • TEL: (909) 595-4037 • FAX: (909) 595-0186
e-mail: esales@electrocube.com • Internet: www.electrocube.com • (IR: 9/99)
®
