SENSITRON K KBU400-G- KBU410-G SEMICONDUCTOR Green Products KBU410-G KBU400-G THRU RECTIFIERS SILICON BR IDGE Data Sheet 1409, Rev. A Reverse Voltage - 50 to 1000 Volts RS-6 0.935(23.7) 0.895(22.7) FEATURES The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 Ideal for printed circuit boards Low reverse leakage High forward surge current capability High temperature soldering guaranteed: 260 C/10 seconds,0.375 " (9.5mm) lead length, 5 lbs. (2.3kg) tension $ %&'223064 Green Products in Compliance with the RoHS Directive 0.15 x0.23L (3 .8 x5.7L) H OLE THRU 0.300 (7.5) 0.7 00(17.8) 0.6 00(16.8) Forward Current - 4.0 Amperes 0.780(1 9.8 ) 0.740(1 8.8 ) AC 1 .0 25.4 MIN. MECHAN ICAL DATA Case: Molded plastic body Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Polarity: Polarity symbols marked on case hole for #6 serew,5in.-lbs. torque max. Moun ting:Thru Weig h t:0.27 ounce, 7.59 grams 0.0 52(1.3 ) DIA. 0.0 48(1.2 ) 0.2 20(5.6 ) 0.1 80(4.6 ) 0.140 (3.5) 0.280(7 .1) 0.268(6 .8) Dimension is in inch and mm MAXIMUM RATINGS AND ELECTRICAL CHARAC TERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. SYMBOLS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward TA=100 C(Note 2) output rectified current at TA=40 C(Note 2) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Rating for Fusing(t<8.3ms) Maximum instantaneous forward voltage drop per birdge element at 6.0A Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating junction temperature range storage temperature range VRR M V RMS VDC KBU 400 KBU 401 KBU 402 KBU 404 KBU 406 KBU 408 KBU 410 UNITS 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 VOLTS VOLTS VOLTS I(AV) 4.0 Amps IFSM 200.0 Amps It 260 As VF 1.1 Volts 2 IR CJ RqJA TJ TST G 10 1.0 200 3.3 -55 to +125 -55 to +150 2 A mA pF C/W C C NOTES: 1.Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts. 2.Unit mounted on 2.6 " x 1.4" x0.06" thick(6.3x3.5x0.15cm)Al.plate. 3.Unit mounted on P.C. board with 0.5" x 0.5" (12x12mm) copper pads. * 221 West Industry Court 3 Deer Park, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 * * World Wide Web Site - http://www.sensitron.com * E-Mail Address - sales@sensitron.com * SENSITRON KBU400-G-KBU410-G SEMICONDUCTOR Green Products Data Sheet 1409, Rev. A RATINGS AND CHARACTERISTIC CURVES KBU400-G THRU KBU410-G Non-Repetitive Peak Forward Surge Current Amps Amps Forward Current Derating Curve Ambient Temperature (C) Number of Cycles @ 60 HZ Typical Reverse Characteristics TJ = 25C Amps Amps Typical Instantaneous Forward Characteristics Volts Percent of Rated Peak Voltage Typical Junction Capacitance Electrical Description pF AC In DC Out Reverse Voltage (Volts) * 221 West Industry Court 3 Deer Park, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 * * World Wide Web Site - http://www.sensitron.com * E-Mail Address - sales@sensitron.com * SENSITRON SEMICONDUCTOR 1409, A KBU410-G K KBU400-GGreen Products DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior not ice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. * * * * * * ! ! !!"#$* * % & '(&)*+,,---. & ./0*12&%# %3 & ./0*