ERDP-025-06.00-TEU-TTR-1-L F-217 (Rev 05DEC16) (0.80 mm) .0315" ERDP-013-06.00-TTR-STR-2-D ERDP SERIES EDGE RATE TWINAX CABLE ASSEMBLIES (R) Broadside wiping contacts reduce unwanted crosstalk Mates with: ERF8, ERM8 SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?ERDP Cable: 30 AWG twinax ribbon cable Signal Routing: 100 W Differential Plating: Au over 50 " (1.27 m) Ni Operating Temp Range: -25 C to +125 C RoHS Compliant: Yes (0.80 mm) .0315" pitch PROTOCOLS * SAS * SATA * Fibre Channel * Ethernet * PCIe(R) * InfiniBandTM HIGH-SPEED CHANNEL PERFORMANCE ERDP Rating based on Samtec reference channel. For full SI performance data visit Samtec.com or contact SIG@samtec.com ERDP 16 END TO END B DV to DV (23.47) .924 WIRE LENGTH NO. POSITIONS PER ROW DV to Edge Mount (-TEX) (26.69) 1.051 = Wire Length in Inches (43. 7 mm) 01.72" minimum -013 (25.86) 1.018 -025 (34.67) 1.365 -049 (53.85) 2.120 Design your High-Speed Cable with Samtec's High-Speed Cable Solutionator(R) at www.samtec.com/hdr -TTR = Terminal, Top Right 02 01 01 -TBL = Pin 1 to Pin N = Terminal, Bottom Left -SBR = Socket, Bottom Right -SBL = Socket, Bottom Left (13.76) .542 -TEU = Terminal, Edge Mount Up -TED = Terminal, Edge Mount Down END NO.1 (-STL SHOWN) -2 = Pin 1 to Pin N -1 -STL (10.19) .401 (7.72) .304 = Pin 1 to Pin 1 -TBR = Socket, Top Left (18.75) .738 -1 = Pin 1 to Pin 2 = Terminal, Top Left -STR A WIRING OPTION -TTL = Socket, Top Right A Notes: Cable lengths longer than 40.00" (1 meter) are not supported with S.I. test data. END NO. 2 = Terminal, Bottom Right (29.92) 1.178 POSITIONS PER ROW Some lengths, styles and options are non-standard, non-returnable. END NO. 1 -"XX.XX" OAL = Wire Length + B 02 Standard latch G b p s -013 = 8 Pair, -025 = 16 Pair, -049 = 32 Pair Edge Mount (-TEX) 30 AWG twinax ribbon cable END NO.2 (-TTR SHOWN) WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. LATCH Specify LATCH from chart (Required callout) -3 -4 LATCH -L -R -D -N * -B -F -S * -C * -G * -T ASSEMBLY End No. 1 Standard Latch, End No. 2 Squeeze Latch End No. 1 Squeeze Latch, End No. 2 Standard Latch Both Ends Standard Latch No Housing Both Ends Standard Latch Both Ends Squeeze Latch End No. 1 Screw Option, End No. 2 Friction Latch End No. 1 Friction Latch, End No. 2 Screw Option Both Ends Screw Option End No. 1 Screw Option, End No. 2 Squeeze Latch End No. 1 Squeeze Latch, End No. 2 Screw Option -B, -C, -G & -T option only available -TEX on both ends. * with -L & -S option only available with -TEX on second end. & -F option only available with -R -TEX on first end.