http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
1
o This data sheet is applied for Lead EMIFILr Inductor Type used for General Electronics equipment for your design.
2011.1.13
Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Inductor type)
ø3.6±0.15
20 min. 5.0±0.3 20 min.
45 min.
ø0.65
(in mm)
∗Coating extending on leads : 1.5 max.
∗∗
(in mm)
5.0±0.3
6.0±1.0
L2L1
l L1
-
L2 l V1.5
0 max.
0.8 max.
ø0.60
ø3.6±0.15
5±0.51.2 max.
3.2 min.
26+1.5
-
0
(in mm)
5.0±0.3
6.0±1.0
L2L1
l L1
-
L2 lV1.5
0 max.
0.8 max.
ø0.60
ø3.6±0.15
5±0.51.2 max.
3.2 min.
52+2
-
1
ø0.65
10±1.0
3.7±1.0
ø3.6±0.15
5.0±0.3
(in mm)
∗Coating extending on leads : 1.5 max.
∗∗
(in mm)
7.5 max. ø3.4±0.2
5.0±0.8 ø0.65
7.5 max.10.0±1.0
15.0 min.
∗There is excess bond stick on the wire.
∗
∗
(in mm)
3.4±0.2
12.7±0.2
ø0.60
H
18.0±0.5
7.5 max.
12.7
7.5 max.
5.0+0.8
-
0.2
11+0
-
1.0
Part Number
BL02RN1R2N1A
BL02RN1R2P1A
BL02RN1R2Q1A
H
16.5±0.5
18.5±0.5
20.0±0.5
Leaded EMIFILr (Inductor type)
BL01/BL02/BL03 Series
■ Dimensions
BL01RN1A1D2B
■ Dimensions
BL01RN1A1E1A
■ Dimensions
BL01RN1A1F1J
■ Dimensions
BL01RN1A2A2B
■ Dimensions
BL02RN1R2M2B
■ Dimensions
BL02RN1R2N1A/BL02RN1R2P1A/BL02RN1R2Q1A
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2
o This data sheet is applied for Lead EMIFILr Inductor Type used for General Electronics equipment for your design.
2011.1.13
12.0 max.
15.0 min.
5.0±1.0
5.0±0.8
∗There is excess bond stick on the wire.
∗
8.0 max. ø3.4±0.2
ø0.65
(in mm)
∗
(in mm)
3.4±0.2
12.7±0.2
ø0.60
∗
∗There is an excess bond stick on the wire.
16.5±0.5
18.0±0.5
8.0 max.12.7
12.0 max.
5.0+0.8
-
0.2
11.0+0
-
1.0
(in mm)
9.0 max. ø3.4±0.2
5.0±0.8 ø0.65
7.5 max.10.0±1.0
15.0 min.
(in mm)
3.4±0.2
12.7±0.2
ø0.60
H
18.0±0.5
9.0 max.
12.7
7.5 max.
5.0+0.8
-
0.2
9.0+0
-
0.5
Part Number
BL02RN2R1N1A
BL02RN2R1P1A
BL02RN2R1Q1A
H
16.5±0.5
18.5±0.5
20.0±0.5
ø0.65
(in mm)
12.0 max.
15.0 min.
5.0±1.0
5.0±0.8
9.0 max. ø3.4±0.2
(in mm)
3.4±0.2
12.7±0.2
ø0.60
16.5±0.5
18.0±0.5
9.0max.12.7
12.0max.
5.0+0.8
-
0.2
11.0+0
-
1.0
Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Inductor type)
■ Dimensions
BL02RN1R3J2B
■ Dimensions
BL02RN1R3N1A
■ Dimensions
BL02RN2R1M2B
■ Dimensions
BL02RN2R1N1A/BL02RN2R1P1A/BL02RN2R1Q1A
■ Dimensions
BL02RN2R3J2B
■ Dimensions
BL02RN2R3N1A
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
3
o This data sheet is applied for Lead EMIFILr Inductor Type used for General Electronics equipment for your design.
2011.1.13
(in mm)
8.3 max. ø2.3 max.
5.0±0.8 ø0.60
6.5 max.10.0±1.0
15.0 min.
(in mm)
2.3 max.
12.7±0.2
ø0.60
H
18.0±0.5
8.3 max.
12.7
6.5 max.
5.0+0.8
-
0.2
9.0+0
-
0.15
Part Number
BL03RN2R1N1A
BL03RN2R1P1A
BL03RN2R1Q1A
H
16.5±0.5
18.5±0.5
20.0±0.5
R
X
Z
160
140
120
100
80
60
40
20
00.5 1 2 5 10 20 50 100 200 500 1000
Impedance (Ω)
Frequency (MHz)
X
R
Z
160
140
120
100
80
60
40
20
00.5 1 2 5 10 20 50 100 200 500 1000
Impedance (Ω)
Frequency (MHz)
X
RZ
160
140
120
100
80
60
40
20
00.5 1 2 5 10 20 50 100 200 500 1000
Impedance (Ω)
Frequency (MHz)
160
140
120
100
80
60
40
20
00.5 1 2 5 10 20 50 100 200 500 1000
X
R
Z
Impedance (Ω)
Frequency (MHz)
Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Inductor type)
■ Dimensions
BL03RN2R1M1B
■ Dimensions
BL03RN2R1N1A/BL03RN2R1P1A/BL03RN2R1Q1A
■ Impedance-Frequency Characteristics
BL01RN1A
■ Impedance-Frequency Characteristics
BL02RN1R
■ Impedance-Frequency Characteristics
BL02RN2R
■ Impedance-Frequency Characteristics
BL03RN2R
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
4
o This data sheet is applied for Lead EMIFILr Inductor Type used for General Electronics equipment for your design.
2011.1.13
(Resistance element becomes dominant
at high frequencies.)
A
B
J
Ammo Pack
Bulk
Paper Reel (ø320mm)
Code Packaging
･Appricable packaging type depends on lead structure.
Please contact us for details.
Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Inductor type)
■ Equivalent Circuit
BL01RN1A/BL02RN1R/BL02RN2R/BL03RN2R
■ Packaging
■ Rated Value (The 12th digit of the Part Number is Packaging Code.)
Part Number Rated Current Operating Temperature Range
BL01RN1A1D2B 7A -40 to +85°C
BL01RN1A1E1A 6A -40 to +85°C
BL01RN1A1F1J 6A -40 to +85°C
BL01RN1A2A2B 7A -40 to +85°C
BL02RN1R2M2B 7A -40 to +85°C
BL02RN1R2N1A 6A -40 to +85°C
BL02RN1R2P1A 6A -40 to +85°C
BL02RN1R2Q1A 6A -40 to +85°C
BL02RN1R3J2B 7A -40 to +85°C
BL02RN1R3N1A 6A -40 to +85°C
BL02RN2R1M2B 7A -40 to +85°C
BL02RN2R1N1A 6A -40 to +85°C
BL02RN2R1P1A 6A -40 to +85°C
BL02RN2R1Q1A 6A -40 to +85°C
BL02RN2R3J2B 7A -40 to +85°C
BL02RN2R3N1A 6A -40 to +85°C
BL03RN2R1M1B 6A -40 to +85°C
BL03RN2R1N1A 6A -40 to +85°C
BL03RN2R1P1A 6A -40 to +85°C
BL03RN2R1Q1A 6A -40 to +85°C
Do not use products beyond the rated current as
this may create excessive heat and deteriorate
the insulation resistance.
■ !Caution (Rating)
