CTS2.5U-N FEED-THROUGH 35 or 32mm DIN Rail Altech "U" Series Universal Rail Mounting Standard Screw Clamp Feed through terminals are the most versatile terminals for wire-to-wire connection in control, automation, instrumentation and power distribution applications. A special design feature on the flexible foot enables easy mounting and dismounting from the DIN Rail with the help of a screwdriver. The terminals with AEx eII EEx eII can be used in a potentially explosive atmosphere which may occur in chemical and petrochemical industry. These terminals can be used in Class 1, Zone 0, 1 & 2 hazardous locations. These terminal blocks comply to En 500019. COLOR BLOCKS CTS4U-N AEx eII EEx eII AEx eII EEx eII Terminal Width 5 mm 6 mm Height x Length 45 x 43 mm 45 x 43 mm Stripping Length 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw clamps & 1 tapped hole for cross connection 2screwclamps&1tappedholeforcrossconnection C Approvals C US Wire Range 22-12 AWG Voltage Rating US E220514 0.5-2.5 sq.mm 22-14 AWG 600V 750V 600V Current Rating 25 A 24 A 20 A Torque 7 lb-in 0.4 Nm 7 lb-in Terminal Block Cat. No. CTS2.5U-N End Plate C C US 22-10 AWG US E220514 0.5-4 sq.mm 22-10 AWG 600 V 750 V 600 V 35/40 A* 32 A 35/40A* 7 lb-in 0.5 Nm 7 lb-in Std. Pk. 100 Cat. No. CTS4U-N Std. Pk. 100 EP2.5/4UN 50 EP2.5/4UN 50 Isolation Partition PP2.5/4UN 50 PP2.5/4UN 50 Separator Plate SP2.5/4UN 100 SP2.5/4UN 100 CA702 CA802 50 50 CA702 CA802 50 50 (other than grey standard) DIN Rail When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB for ordering information refer to page 62 End Stop for ordering information refer to page 63 Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA721/2 CA721/3 CA721/4 CA721/10 CA721/100 100 50 50 10 10 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 50 50 10 10 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA741/2 CA741/3 CA741/4 CA741/10 CA741/100 100 50 50 10 10 CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 100 50 50 10 10 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole CA703/01 CA704/01 CA705/01 CA731/10 -- CA731/100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA 707/S/Q/01 100 CA707/S/Q/01 100 CA717/2 CA717/3 CA717/4 CA717/10 100 100 100 25 CA713/2 CA713/3 CA713/4 CA713/10 100 100 50 25 MT5 100 MT6 100 Current Bars Warning labels available. See page 67. * 35A with one No. 10 AWG and 40A with two No. 12 AWG wires. 12 Shorting Sleeve & Screw External Jumper Marking Tags 2 pole 3 pole 4 pole 10 pole Warning Label Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com CTS6U CTS10U AEx eII EEx eII CTS16U AEx eII EEx eII CTS25U AEx eII EEx eII AEx eII EEx eII 8 mm 10 mm 12 mm 12 mm 47 x 43 mm 47 x 43 mm 47 x 43 mm 56 x 49.5 mm 12 mm 12 mm 16 mm 18 mm Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 2 screw clamps & 1 tapped hole for cross connection 2 screw clamps & 1 tapped hole for cross connection 2 screw clamps & 1 tapped hole for cross connection 2 screw clamps & 1 tapped hole for cross connection C C US 22-8 AWG US E220514 1.5-6 sq.mm 22-8 AWG 600 V 750 V 600 V 50 A 41 A 50 A 0.8 Nm 14 lb-in 9 lb-in C C US 22-6 AWG US E220514 1.5-10 sq.mm 16-6 AWG 600 V 750 V 600 V 65 A 57 A 65 A 1.2 Nm 14 lb-in 14 lb-in C C US 22-6 AWG US E220514 2.5-16 sq.mm 20-4 AWG 600 V 800 V 600 V 70 A 76 A 85 A 1.2 Nm 14 lb-in 14 lb-in Cat. No. CTS16U Std. Pk. 50 C C US 12-2 AWG US E220514 6-25 sq.mm 14-2 AWG 600 V 750 V 600 V 115 A 101 A 115 A 2.0 Nm 25 lb-in 25 lb-in Cat. No. CTS6U Std. Pk. 100 Cat. No. CTS10U Std. Pk. 100 EP6/10U 50 EP6/10U 50 EP25U 50 PP6/10U 50 PP6/10U 50 PP25U 50 SP6/10U 100 SP6/10U 100 SP6/10U 100 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA723/2 CA723/3 CA723/4 CA723/10 100 50 50 10 CA724/2 CA724/3 CA724/4 CA724/10 100 50 50 10 CA751/2 CA751/3 CA751/4 CA751/10 50 50 50 10 CA725/2 CA725/3 CA725/4 CA725/10 50 25 25 10 CA743/2 CA743/3 CA743/4 CA743/10 100 50 50 10 CA744/2 CA744/3 CA744/4 CA744/10 100 50 50 10 CA761/2 CA761/3 CA761/4 CA761/10 50 50 50 10 CA745/2 CA745/3 CA745/4 CA745/10 50 25 25 10 CA703/2 CA704/2 CA705/2 CA733/10 100 100 100 100 CA703/3 CA704/3 CA705/3 CA734/10 100 100 100 100 CA703/8 CA704/8 CA705/8 CA739/10 100 100 100 100 CA703/4 CA704/4 CA705/4 CA735/10 100 100 100 100 CA707/S/Q/1 100 CA707/S/Q/1 100 CA707/S/Q/5 100 CA707/S/Q/2 100 CA710/2 CA710/3 CA710/4 CA710/10 100 100 100 25 CA718/2 CA718/3 CA718/4 CA718/10 100 50 50 25 MT8 100 MT10 100 MT12 100 MT12 100 SWL6 100 Cat. No. CTS25U Std. Pk. 50 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 13 CTS35U CTS50U CTS95U AEx eII EEx eII Terminal Width 15 mm 20.5 mm 25 mm Height x Length 58 x 52.5 mm 75.5 x 71 mm 90 x 83 mm Stripping Length 18 mm 22 mm 24 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw clamps & 1 tapped hole for cross connection 2 screw clamp connections 2 Allen screw clamp connections Approvals C C US Wire Range 8-2 AWG Voltage Rating US E220514 C C US 6-2/0 AWG 16-50 sq.mm US E220514 6-2/0 AWG C C US 2-4/0 AWG 16-95 sq.mm US E220514 2-4/0 AWG 10-35 sq.mm 8-2 AWG 600 V 750 V 600 V 600V 1000 V 600 V 600V 1000 V 600 V Current Rating 145 A 125 A 145 A 150 A 150 A 150 A 230 A 232 A 230 A Torque 25 lb-in 2.5 Nm 25 lb-in 60 lb-in 6.8 Nm 60 lb-in 160 lb-in 18.2 Nm 160 lb-in Terminal Block Cat. No. CTS35U End Plate EP35U 50 Isolation Partition PP35U 50 CA702 CA802 50 50 Internal Jumper CA726/2 CA726/3 CA726/4 CA726/10 50 25 25 10 Insulated Internal Jumper CA746/2 CA746/3 CA746/4 CA746/10 50 25 25 10 Current Bars CA703/5 CA704/5 CA705/5 CA736/10 100 100 100 100 Shorting Sleeve & Screw CA707/S/Q/2 100 Marking Tags MT15 100 Std. Pk. 50 Cat. No. CTS50U Std. Pk. 20 Cat. No. CTS95U Std. Pk. 10 CA202 CA102 50 50 CA202 CA102 50 50 MT20 100 MT25 100 Separator Plate DIN Rail for ordering information refer to page 62 End Stop for ordering information refer to page 63 14 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com CMC2-2 CMC1-2 FEED-THROUGH MULTI-CONNECTION 35 or 32mm DIN Rail Connect multiple wires to a single terminal block and eliminate reliability problems encountered when connecting two wires into a single clamp. Two versions are available. Type CMC1-2 features a single screw-cage clamp for 22-10 AWG wires on one side and two clamps on the other side for 22-10 AWG wires. Type CMC2-2 has two identical clamps for 22-10 AWG wires on both sides. Terminal Width 6 mm 6 mm Height x Length 47 x 46.5 mm 51.5 x 65 mm Stripping Length 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 3screwclamps&1tappedholeforcrossconnection 4screwclamps&2tappedholesforcrossconnection C Approvals C US Wire Range 22-10AWG Voltage Rating US E220514 0.5-4 sq.mm 22-10 AWG 600 V 600 V 600 V Current Rating 35 A 32 A 35 A Torque 7 lb-in. 0.5 Nm 7 lb-in. Cat. No. Std. Pk. C C US 22-10 AWG US E220514 0.5-4 sq.mm 22-10 AWG 600 V 600 V 600 V 35 A 32 A 35 A 0.5 Nm 7 lb-in. 7 lb-in. Cat. No. Std. Pk. Terminal Block CMC1-2 100 CMC2-2 50 End Plate EPCMC1-2 50 EPCMC2-2 50 CA702 CA802 50 50 CA702 CA802 50 50 DIN Rail for ordering information refer to page 62 End Stop for ordering information refer to page 63 COLOR BLOCKS Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 50 50 10 5 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 50 50 10 5 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 100 50 50 10 5 CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 100 50 50 10 5 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA707/S/Q/01 100 CA707/S/Q/01 100 CA713/2 CA713/3 CA713/4 CA713/10 100 100 50 25 CA713/2 CA713/3 CA713/4 CA713/10 100 100 50 25 MT6 100 MT6 100 (other than grey standard) When ordering please add color suffix to Cat. No. Current Bars Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole Shorting Sleeve & Screw External Jumper for use in upper level Marking Tags (MT Type) 2 pole 3 pole 4 pole 10 pole Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 15 CDL4U(I.S) CDL4U FEED-THROUGH DOUBLE LEVEL 35 or 32mm DIN Rail Altech double level terminals are the answer to high wiring density problems posed by certain unavoidable wiring arrangements. Double level terminals have the following advantages: * Double wiring density available without extension of mounting rails. * Interconnection/shorting can be done at both levels. * Marking/identification by marking tags possible at both levels. Terminal Width 6 mm 6 mm Height x Length 54 x 55.5 mm 54 x 55.5 mm Stripping Length 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 4screwclamps&2tappedholesforcrossconnection 4screwclamps&1tappedholeforcrossconnection Approvals CDL4U(I.S) internally shorted double level terminals are useful for distribution applications by using shorting links at lower levels. C C US Wire Range 22-10 AWG Voltage Rating US E220514 0.5-4 sq.mm 22-10 AWG 300V 400 V 600 V Current Rating 35 A 32 A 35 A Torque 7 lb-in 0.5 Nm 7 lb-in C C US 22-10 AWG US E220514 0.5-4 sq.mm 22-10 AWG 300 V 400 V 600 V 35 A 32 A 35 A 0.5 Nm 7 lb-in 7 lb-in Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CDL4U 100 CDL4U(I.S) 100 End Plate EPCDL4U 50 EPCDL4U 50 Separator Plate SPCDL4U 100 SPCDL4U 100 CA702 CA802 50 50 CA702 CA802 50 50 DIN Rail for ordering information refer to page 62 End Stop for ordering information refer to page 63 COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown 16 Ordering Suffix R BU BL O G Y W BG DB Internal Jumper 2 pole 3 pole 4 pole 10 pole CA727/2 CA727/3 CA727/4 CA727/10 100 50 50 10 CA727/2 CA727/3 CA727/4 CA727/10 100 50 50 10 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole CA747/2 CA747/3 CA747/4 CA747/10 100 50 50 10 CA747/2 CA747/3 CA747/4 CA747/10 100 50 50 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA607/S/Q 100 CA607/S/Q 100 CA714/2 CA714/3 CA714/4 CA714/10 100 100 50 25 CA714/2 CA714/3 CA714/4 CA714/10 100 100 50 25 MT2 100 MT2 100 Current Bars 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole Shorting Sleeve & Screw External Jumper Marking Tags 2 pole 3 pole 4 pole 10 pole (MT Type) Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com ODL4U FEED-THROUGH OFFSET DOUBLE LEVEL Altech Offset Double Level Terminals, which provide a separate connection at two levels. In ODL, the top level is offset from the bottom level by half the thickness of the terminal. This offset provides better accessibility to the screws on the lower level. *It is recommended to use end plates at both ends of assembled ODL terminal sets for flat alignment to enable effective use of end stops. Terminal Width 6 mm Height x Length 63 x 68 mm Stripping Length 9 mm Insulation Material Polyamide 6.6 Type of Connection 4screwclamps&2tappedholesforcrossconnection Approvals C Wire Range 22-10 AWG Voltage Rating C US US E220514 0.5-4 sq.mm 22-10 AWG 600 V 600 V 600 V Current Rating 35 A 32 A 35 A Torque 7 lb-in 0.5 Nm 7 lb-in Cat. No. Std. Pk. ODL4U 50 EPODL4U EP1ODL4U 50 50 CA702 CA802 50 50 Terminal Block End Plate* Front Back DIN Rail for ordering information refer to page 62 End Stop for ordering information refer to page 63 COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB Internal Jumper 2 pole 3 pole 4 pole 10 pole CA727/2 CA727/3 CA727/4 CA727/10 10 10 10 10 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole CA747/2 CA747/3 CA747/4 CA747/10 100 50 50 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA607/S/Q 100 CA714/2 CA714/3 CA714/4 CA714/10 100 100 50 25 MT6 100 Current Bars 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole Shorting Sleeve & Screw 2 pole 3 pole 4 pole 10 pole External Jumper Marking Tags (MT Type) Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 17 CTL2.5U CTL2.5U-H FEED-THROUGH TRIPLE LEVEL 35 or 32mm DIN Rail For applications with extreme space constraints. Only 6mm (.236") wide, with three separate feed-through levels. Jumpers can be used to reduce field wiring. They can also be used in control systems where sensors and actuator applications are involved. The top level of CTL2.5UH terminal block provide connecting points for signal while middle and bottom level provide connecting points are used for positive and negative potential. In applications where switching indication is required, choice of CTL2.5UHL and CTL2.5UL terminal blocks with built-in electronic components are available. Terminal Width 6 mm 6 mm Height x Length 67 x 61 mm 67 x 84 mm Stripping Length 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 4Screwclamps&3tappedholesforcrossconnection 6Screwclamps&3tappedholesforcrossconnection Approvals C US E220514 C US E220514 Wire Range 22-12 AWG 0.5-2.5 sq.mm 22-12 AWG 22-12 AWG 0.5-2.5 sq.mm 22-12 AWG Voltage Rating 300 V 500 V 300 V 300 V 500 V 300 V Current Rating 25 A 24 A 25 A 25 A 24 A 25 A Torque 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm 4.5 lb-in Cat. No. Std. Pk. 4.5 lb-in Cat. No. Std. Pk. Terminal Block CTL2.5U-H 50 CTL2.5U 50 End Plate EPCTL2.5U-H 50 EPCTL2.5U 50 CA702 CA802 50 50 CA702 CA802 50 50 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 50 50 10 5 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 50 50 10 5 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA707/S/Q/01 100 CA707/S/Q/01 100 CA715/2 CA715/3 CA715/4 CA715/10 100 100 100 50 CA715/2 CA715/3 CA715/4 CA715/10 100 100 100 50 MT2 100 MT2 100 DIN Rail for ordering information refer to page 62 End Stop for ordering information refer to page 63 COLOR BLOCKS 2 pole 3 pole 4 pole 10 pole 100 pole Internal Jumper (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown 18 Ordering Suffix R BU BL O G Y W BG DB Current Bars 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole Shorting Sleeve & Screw External Jumper Marking Tags 2 pole 3 pole 4 pole 10 pole (MT Type) Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com CTL2.5U-H(L)* CTL2.5U(L)* 6 mm 6 mm 67 x 61 mm 67 x 84 mm 9 mm 9 mm Polyamide 6.6 Polyamide 6.6 4Screwclamps&2tappedholesforcrossconnection 6Screwclamps&2tappedholesforcrossconnection C US 22-12 AWG E220514 0.5-2.5 sq.mm 22-12 AWG 300 V 500 V 300 V 25 A 24 A 25 A 0.4 Nm 4.5 lb-in 4.5 lb-in Cat. No. Std. Pk. C US 22-12 AWG E220514 0.5-2.5 sq.mm 22-12 AWG 300 V 500 V 300 V 25 A 24 A 25 A 0.4 Nm 4.5 lb-in 4.5 lb-in Cat. No. Std. Pk. CTL2.5U-H(L)* 50 CTL2.5U(L)* 50 EPCTL2.5U-H 50 EPCTL2.5U 50 CA702 CA802 50 50 CA702 CA802 50 50 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 50 50 10 5 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 50 50 10 5 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA707/S/Q/01 100 CA707/S/Q/01 100 CA715/2 CA715/3 CA715/4 CA715/10 100 100 100 50 CA715/2 CA715/3 CA715/4 CA715/10 100 100 100 50 MT2 100 MT2 100 Ideal for sensor applications. See Altech's Inductive Proximity Sensor catalog for ordering information. * Add required voltage to part number as suffix; i.e. CTL2.5U(L)/24 for 24V DC Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 19 Altech CDB Compact Distribution Blocks are an ideal choice for a simplified distribution system. A lug/bolt secures the incoming cable and the screw clamp design of the block provides the outgoing connections. These provide easy connect points and ensure perfect continuity for distribution. A protective shield effectively shrouds the incoming connection. Application Information: Sum of outgoing currents on either side of center should not exceed half the maximum permissible incoming current. Sum of total outgoing currents should not exceed maximum permissible incoming current. Connection for higher outgoing currents should be done through the terminal nearest to the incoming connection. CMDB blocks are the modified version of CDB terminal blocks without central incoming terminal connections. CDB4(1) CDB4 DISTRIBUTION BLOCK Terminal Width 6 mm 6 mm Height & Width 45 x 43 mm 45 x 43 mm Stripping Length 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 1 Lug/ M5 bolt connection for ring lug 1 Lug M5 /bolt connection for ring lug Screw clamp connection Screw clamp connection Type of Connection Input Output C Approvals Input Output Wire Range US E220514 10-8 AWG 22-12 AWG 6-16 sq.mm 0.5-4 sq.mm 10-8 AWG 22-10 AWG C US 10-8 AWG 22-12 AWG E220514 6-16 sq.mm 0.5-4 sq.mm 10-8 AWG 22-10 AWG Voltage Rating 600 V 750 V 600 V 600 V 750 V 600 V Current Rating Input Max. Individual Output 50 A 25 A 32 A 50 A 35 A 50 A 25 A 32 A 50 A 35 A 2.0 Nm 0.5 Nm 26 lb-in 7 lb-in 2.0 Nm 0.5 Nm 26 lb-in 7 lb-in Input Output Torque 26 lb-in 7 lb-in Cat. No. CDB4/1 CDB4/2 CDB4/3 CDB4/4 CDB4/5 Terminal Block 26 lb-in 7 lb-in H x W x L (mm) Outputs Std.Pk H x W x L (mm) Outputs Std.Pk. Cat. No. 45 x 43 x 43.8 4 10 CDB4/2(1) 45 x 43 x 52 4 10 45 x 43 x 55.8 8 10 CDB4/3(1) 45 x 43 x 58 6 10 45 x 43 x 67.8 12 10 CDB4/4(1) 45 x 43 x 64 8 5 45 x 43 x 80 16 5 CDB4/5(1) 45 x 43 x 70 10 5 45 x 43 x 96 20 5 CDB4/6(1) 45 x 43 x 76 12 5 CDB4/10(1) 45 x 43 x 100 20 5 CDB4/11(1) 45 x 43 x 106 22 5 Cat. No. Std. Pk. CA702 CA802 50 50 CA702 CA802 50 50 MT6 100 MT6 100 Cat. No. Std. Pk. COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown 20 Ordering Suffix R BU BL O G Y W BG DB DIN Rail for ordering information refer to page 62 End Stop for ordering information refer to page 63 Marking Tags (MT Type) Warning Label Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com CDB6 CDB10 CMDB4 8 mm 10 mm 6 mm 43 x 47 mm 43 x 47 mm 45 x 43 mm 12 mm 12 mm 9 mm Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 1 Lug/ M6 bolt connection for ring lug 1 Lug/ M8 bolt connection for ring lug Screw clamp connection Screw clamp connection Screw clamp connection C US 10-6 AWG 22-8 AWG E220514 6-25 sq.mm 1.5-6 sq.mm 10-2 AWG 22-8 AWG 600 V 750 V 600 V 100 A 50 A 41 A 100 A 50 A 3.0 Nm 0.8 Nm 35 lb-in 14 lb-in 25 lb-in 9 lb-in Cat. No. H x W x L (mm) Outputs Std.Pk CDB6/2 43 x 47 x 64 CDB6/3 43 x 47 x 80 CDB6/4 43 x 47 x 96 8 12 16 10 10 5 C US 7-2 AWG 15-7 AWG E220514 10-35 sq.mm 1.5-10 sq.mm 8-1/0 AWG 22-6 AWG 600 V 750 V 600 V 125 A 65 A 57 A 130 A 65 A 6.0 Nm 1.2 Nm 53 lb-in 14 lb-in 53 lb-in 14 lb-in Cat. No. H x W x L (mm) Outputs Std.Pk CDB10/2 43 x 47 x 72 CDB10/3 43 x 47 x 92 CDB10/4 43 x 47 x 112 8 12 16 10 10 5 22-10 AWG 0.5-4 sq.mm 22-10 AWG 600 V 800 V 600 V 35 A 32 A 35 A 0.5 Nm 7 lb-in 7 lb-in Cat. No. CMDB4/2 CMDB4/3 CMDB4/4 CMDB4/10 H x W x L (mm) Outputs Std.Pk 45 x 43 x 13.5 4 45 x 43 x 19.5 6 45 x 43 x 25.5 8 45 x 43 x 61.5 20 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 MT8 100 MT10 100 MT6 100 SWL6 100 10 10 5 5 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 21 CMDB6 CMDB10 Terminal Width 8 mm 10 mm Height & Width 43 x 47 mm 43 x 47 mm Stripping Length 12 mm 12 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Input Type of Connection Screw clamp connection Output Screw clamp connection Approvals Input Output Wire Range 22-8 AWG 1.5-6 sq.mm 22-8 AWG 15-7 AWG 1.5-10 sq.mm 20-6 AWG Voltage Rating 600 V 800 V 600 V 600 V 800 V 600 V Current Rating Input Max. Individual Output 50 A 41 A 50 A 65 A 57 A 65 A 0.8 Nm 14 lb-in 1.2 Nm 14 lb-in H x W x L (mm) Outputs Std.Pk H x W x L (mm) Outputs Std.Pk 4 6 8 20 10 10 10 5 43 x 48 x 21.5 43 x 48 x 31.5 43 x 48 x 41.5 43 x 48 x 101.5 4 6 8 20 10 10 10 5 Input Output Torque 9 lb-in Cat. No. Terminal Block CMDB6/2 43 x 48 x 17.5 CMDB6/3 43 x 48 x 25.5 CMDB6/4 43 x 48 x 33.5 CMDB6/10 43 x 48 x 81.5 14 lb-in Cat. No. CMDB10/2 CMDB10/3 CMDB10/4 CMDB10/10 Cat. No. Std. Pk. Cat. No. Std. Pk. for ordering information refer to page 63 CA702 CA802 50 50 CA702 CA802 50 50 Marking Tags MT8 100 MT10 100 SWL6 100 DIN Rail for ordering information refer to page 62 End Stop (MT Type) Warning Label COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R 22 Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 38049 38041 38049 (UL File E98082) DB16 (UL File E220514) 38041 (UL File E98082) DB35 (UL File E220514) ONE PHASE POWER DISTRIBUTION BLOCKS * Speed of mounting and wiring * IP20 Finger Safe * DIN Rail or Panel Mount * Blocks fit with other DIN Rail mountable modular devices (height 95mm, depth 44.5mm) * Accessories increase the number of outputs with only one input. Part Number: White Gray Approvals Current Rating 80A 80A 115A 125A Voltage Rating 600V AC 690V AC 600V AC 690V AC No. of Inputs Wire Range Torque 1 8-4 AWG 13.5lb.-in. 1 6-16mm2 1.5Nm 1 8-2 AWG 31lb.-in. 1 10-35mm2 3.5Nm Screw Type No. of Outputs Wire Range Torque Wire Range Torque Screw Type Optional Marking Tag (for DB16 and DB35) Pozi Drive 2 6 6 (2x)8-4 AWG (2x)6-16mm2 13.5lb.-in. 1.5Nm (4x)14-10 AWG (4x)2.5-6mm2 7.2lb.-in. 0.8Nm Pozi Drive 2 MT2 (40 for DB35) Pozi Drive 2 6 14-6 AWG 17.5lb.-in. 6 2.5-16mm2 2Nm Pozi Drive 2 MT2 Dimensions: Fork Type Busbar 38045 38041 Accessories Fork Type Busbar Part Number: 38045 to jump 2 Blocks 38046 to jump 8 Blocks can be cut to customer needs Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 23 38032 Part Number: Approvals Current Rating 38032 E980082 38019 38020 38020 160A 160A Voltage Rating 600V AC No. of Inputs Wire Range Torque No. of Outputs Wire Range Torque Wire Range Torque Wire Range Torque E980082 38019 230A 250A 690V AC 600V AC 1 8-2/0AWG 35.5lb. in. 1 10-70mm2 4Nm 6 14-6 AWG 17.5lb. in. 6 2.5-16mm2 2Nm E980082 310A 400A 690V AC 600V AC 690V AC 1 2-4/0AWG 170lb. in. 1 35-120mm2 19Nm 1 3/0-350kcmil 230lb. in. 1 95-185mm2 25Nm 11 2x 14-2AWG 31lb. in. 5x 14-6AWG 17.5lb. in. 4x 14-8AWG 17.5lb. in. 11 2.5-35mm2 3.5Nm 2.5-16mm2 2Nm 2.5-10mm2 2Nm 11 2x 14-2AWG 31lb. in. 5x 14-6AWG 17.5lb. in. 4 x 14-8AWG 17.5lb. in. 11 2.5-35mm2 3.5Nm 2.5-16mm2 2Nm 2.5-10mm2 2Nm Dimensions: Accessories Part Number: Copper Jumper Bar 3803221 for 2 Blocks 3803231 for 3 Blocks 3803241 for 4 Blocks can be cut to customer needs 38032 24 Copper Jumper Bar 3803221 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 38073 38075 THREE PHASE POWER DISTRIBUTION BLOCKS * Speed of mounting and wiring * IP20 Finger Safe * DIN Rail or Panel Mount * Blocks fit with other DIN Rail mountable modular devices * Same compact size for both ratings 3 Pole Part Number: Approvals Current Rating 38075 E980082 38073 115A 115A Voltage Rating 600V AC No. of Inputs Wire Range Torque No. of Outputs Wire Range Torque E980082 175A 175A 690V AC 600V AC 690V AC 3x1 8-2AWG 31lb. in. 3x1 10-35mm2 3.5Nm 3x1 8-2/0AWG 35.5lb. in. 3x1 10-70mm2 4Nm 3x6 14-4AWG 17.5lb. in. 3x6 2.5-16mm2 2Nm 3x6 14-4AWG 17.5 lb. in. 3x6 2.5-16mm2 2Nm Dimensions: Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 25 CGT4U GROUND 35 and 32mm DIN Rail CGT4N Use ground blocks instead of grounding studs and wire lugs to terminate ground wires, saving installation and wiring time. Ground blocks clamp mechanically onto the DIN Rail by tightening the center mounting screw, making a reliable electrical connection between the cage clamp terminals and the DIN Rail. The rail serves as a busbar and automatically distributes ground potential to all other ground terminals on the same rail. Ground blocks can also be used as end stops, preventing other terminal blocks and components from moving laterally on the DIN Rail. They are supplied with a standard green/yellow housing for easy identification and accept standard marking tags. CGT4U, CGT10U and CGT35U can be mounted on both DIN 32mm and DIN 35mm rails. CGT4N & CGT6N can be mounted on 35mm DIN rail and have the same top outer profile as the feed through blocks (CTS4U-N, CTS2.5U-N, CTS6U, CTS10U). CGMT4 can be mounted on 15mm DIN rails and has the same top outer profile as the CMT4 feed through blocks. AEx eII EEx eII Terminal Width 6 mm 6 mm Height x Length 48 x 43 mm 45.4 x 54.2 mm Stripping Length 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw clamps 2 screw clamps Approvals C Wire Range 22-10 AWG 0.5-4 sq.mm 22-10 AWG 22-10 AWG 0.5-4 sq.mm 22-10 AWG Torque 7 lb-in 7 lb-in Terminal Block US E220514 0.5 Nm 7 lb-in C US E220514 0.8 Nm 7 lb-in Cat. No. Std. Pk. Cat. No. Std. Pk. CGT4N 50 CGT4N 50 EPCGT4U 100 EPCGT4U 100 MT6 100 MT6 100 DIN Rail for ordering information refer to page 62 End Plate Marking Tags (MT Type) * High density * Screw-cage clamp * Special clamping foot * Polyamide 6.6 * Color: green/yellow Assembly for single phase 3 wire circuits. 26 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com CGT6N CGT10U CGT35U CGMT4 AEx eII EEx eII 8 mm 10 mm 16 mm 6 mm 47 x 54.5 mm 49.5 x 45 mm 61.5 x 58 mm 28.5 x 27 mm 12 mm 12 mm 18 mm 9 mm Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 2 screw clamps 2 screw clamps 2 screw clamps 2 screw clamps C US E220514 C US 22-8 AWG 1.5-6 sq.mm 22-8 AWG 22-6 AWG 14 lb-in 0.8 Nm 14 lb-in 14 lb-in E220514 1.5-10 sq.mm 16-8 AWG 1.2 Nm 14 lb-in C US E220514 C US E220514 8-2 AWG 10-35 sq.mm 8-2 AWG 22-10 AWG 0.5-4 sq.mm 22-10 AWG 25 lb-in 2.5 Nm 25 lb-in 7 lb-in 0.5 Nm 7 lb-in Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. CGT6N 50 CGT10N 50 CGT35N 20 CGMT4 50 EPCGT4U 100 EPCGT4U 100 EPCGT4U 100 EPCGT4U 100 MT8 100 MT10 100 MT15 100 MT2 100 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 27 CDTTU DISCONNECT 35 or 32mm DIN Rail CDTTU-SH Disconnect and test terminals are an ideal choice for measuring control and regulatory circuits.The terminals provide a clear functional advantage for devices having utility instruments and associated transformers. Five versions of disconnect and test terminals are available: * CDTTU - disconnection is achieved by means of a slide Terminal Width link operated with a screw driver. * CDTTU-SH - disconnect and test terminals are ideal for use in current transformer applications when it is mandatory to keep the secondary side shorted at any point while taking current measurements. * CKT4U - disconnection is achieved by lifting the knife contact lever. * CSDL4U - hinged diconnection and testing terminal, incorporates a connecting link in place of the fuse link. * CSDL6U - hinged disconnect block for 8 AWG size wires. * DDDL4U - double level disconnect terminal with hinged disconnect in upper level. Specially designed socket head screws act as test/monitoring points in both CDTTU, CDTTU-SH and CKT4U. Important: The disconnecting device is not suitable for interrupting load.The supply must be switched off before operating the slide link/lever. 8 mm 16 mm Height x Length 57 x 63 mm 57 x 63 mm Stripping Length 12 mm 12 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw clamps 4 screw clamps Approvals C Wire Range 16-8 AWG Voltage Rating (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R 28 E220514 1.5-6 sq.mm 16-8 AWG 600 V 750 V 600 V Current Rating 41 A 41 A 41 A Torque 14 lb-in 1.2 Nm 14 lb-in C US 16-8 AWG 1.5-6 sq.mm 16-8 AWG 300 V 300 V 600 V 10 A 10 A 10 A 1.6 Nm 14 lb-in 14 lb-in Cat. No. Std. Pk. Terminal Block CDTTU 50 CDTTU-SH 50 End Plate EPCDTTU 50 EPCDTTU 50 Cat. No. Std. Pk. CA702 CA802 50 50 CA702 CA802 50 50 CA710/2 CA710/3 CA710/4 CA710/10 100 100 100 25 CA710/2 CA710/3 CA710/4 CA710/10 100 100 100 25 MT8 100 MT8 100 Isolation Partition for ordering information refer to page 62 DIN Rail for ordering information refer to page 63 End Stop External Jumper for internal jumpers refer to page 60 2 pole 3 pole 4 pole 10 pole Marking Tags (MT Type) (MT Type on Lever) COLOR BLOCKS US Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com CKT4U CSDL4U CSDL6U DDDL4U 6 mm 8 mm 8 mm 8 mm 46 x 46.3 mm 43 x 58 mm 60 x 43 mm 66 x 88 mm 9 mm 9.5 mm 9.5 mm 9.5 mm Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 2 screw clamps 2 screw clamps 2 screw clamps 4 screw clamps C US 22-10 AWG E220514 0.5-4 sq.mm 22-10 AWG 600 V 750 V 600 V 16 A 16 A 16 A 0.5 Nm 7 lb-in 7 lb-in C US 22-10 AWG E220514 0.5-4 sq.mm 22-10 AWG 600 V 750 V 600 V 14 A 6.3 A 14 A 0.5 Nm 7 lb-in 7 lb-in Cat. No. Std. Pk. C US 22-8 AWG C US 1.5-6 sq.mm 22-8 AWG 22-10 AWG 22-10 AWG 300 V 500 V 300 V 600 V 300 V 10 A 6.3 A 10 A 14 / 35 A 14 / 35 A 0.8 Nm 14 lb-in 7 lb-in 7 lb-in 14 lb-in Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. CKT4U 50 CSDL4U 100 CSDL6U 50 DDDL4U 20 EPCKT4U 50 EPCSFL4U 50 EPCSFL6U 50 EPDDFL4U 25 PPCSFL4U 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA713/2 CA713/3 CA713/4 CA713/10 100 100 50 25 CA711/2 CA711/3 CA711/4 CA711/10 100 100 50 25 CA710/2 CA710/3 CA710/4 CA710/10 100 50 50 25 CA711/2 CA711/3 CA711/4 CA711/10 100 100 50 25 MT6 100 MT8 MT2 100 100 MT8 100 MT8 MT2 100 100 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 29 Certain electrical and control systems require protection by fuses. CSFL4U and CSFL6U have a specially designed space for cartridge type glass fuse and accept O5 x 20 or O5 x 25 mm fuses. CAFL4U accepts O1/4 x 1-1/4 in. fuses. The fuse can be engaged or disengaged by the movement of the carrier. Altech fuse terminals are also available with light indication CSFL4U(L). A specially designed built-in circuit gives light indication in the event of fuse blow out. Thus, fault in a circuit can be easily located. However, an application of such terminals must take into consideration residual current flow. CAFL4U(L) is equipped with a LED for blown fuse indication. CAFL4U(N) is equipped with a neon bulb for same application. Important: The disconnecting device is not suitable for interrupting load.The supply must be switched off before operating the slide link/lever. Fuses are sold separately Altech, see page 34 for details. CSFL4U(L)* CSFL4U FUSE BLOCKS Fuse not included. Fuse not included. Terminal Width 8 mm 8 mm Height x Length 43 x 58 mm 43 x 58 mm Stripping Length 9.5 mm 9.5 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw clamps 2 screw clamps 24V AC/DC, 48V AC/DC, 110V AC/DC, 220V AC Fusion Voltage Type of Fuse Used Approvals O5x20, O5x25 mm O5x20, O5x25 mm C US E220514 0.5-4 sq.mm 22-10 AWG C US 22-10 AWG E220514 0.5-4 sq.mm 22-10 AWG Wire Range 22-10 AWG Voltage Rating 600 V 750 V 600 V 600 V 750 V 600 V Current Rating 16 A 6.3 A 8A 6.3 A 6.3 A 8A Torque 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CSFL4U 100 CSFL4U(L)* 50 End Plate EPCSFL4U 50 EPCSFL4U 50 Isolation Partition PPCSFL4U 50 PPCSFL4U 50 CA702 CA802 50 50 CA702 CA802 50 50 DIN Rail for ordering information refer to page 62 End Stop for ordering information refer to page 63 External Jumper 2 pole 3 pole 4 pole 10 pole Marking Tags (MT Type) (MT Type on Lever) COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R 30 Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB CA711/2 CA711/3 CA711/4 CA711/10 100 100 50 25 CA711/2 CA711/3 CA711/4 CA711/10 100 100 50 25 MT8 MT2 100 100 MT8 MT2 100 100 * Add required voltage to part number as a suffix. i.e. CSFL4U(L)/24 for 24V AC/DC. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com CAFL4U(L)* CAFL4U Fuse not included. CAFL4U(N) Fuse not included. CSFL6U Fuse not included. Fuse not included. 9 mm 9 mm 9 mm 8 mm 50 x 72 mm 50 x 70 mm 50 x 70 mm 60 x 43 mm 12 mm 12 mm 12 mm 12 mm Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 2 screw clamps 2 screw clamps 2 screw clamps 2 screw clamps 24VAC/DC, 48VAC/DC, 110VAC/DC, 220VAC, 300VAC 110-220VAC O1/4x1 in., O1/4x11/4 in. O1/4x1 in., O1/4x11/4 in. O1/4x1 in., O1/4x11/4 in. C US 22-10 AWG E220514 0.5-4 sq.mm 22-10 AWG C US E220514 C US O5x20, O5x25 mm E220514 C US 22-10 AWG 0.5-4 sq.mm 22-10 AWG 22-10 AWG 0.5-4 sq.mm 22-10 AWG 22-8 AWG E220514 1.5-6 sq.mm 22-8 AWG 600 V 600 V 600 V 600 V 600 V 600 V 600 V 600 V 600 V 300 V 500 V 300 V 16 A 6.3 A 12 A 16 A 6.3 A 12 A 16 A 6.3 A 12 A 10 A 6.3 A 10 A 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 7 lb-in 0.8 Nm 14 lb-in Cat. No. Std. Pk. 7 lb-in Cat. No. Std. Pk. 7 lb-in Cat. No. Std. Pk. 14 lb-in Cat. No. Std. Pk. CAFL4U 25 CAFL4U(L)* 25 CAFL4U(N) 25 CSFL6U 50 EPCAFL4U 50 EPCAFL4U 50 EPCAFL4U 50 EPCSFL6U 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA716/2 CA716/3 CA716/4 CA716/10 50 50 50 25 CA716/2 CA716/3 CA716/4 CA716/10 50 50 50 25 CA716/2 CA716/3 CA716/4 CA716/10 50 50 50 25 CA710/2 CA710/3 CA710/4 CA710/10 100 100 100 25 MT9 100 MT9 100 MT9 100 MT8 MT6 100 100 * Add required voltage to part number as a suffix. i.e. CSFL4U(L)/24 for 24V AC/DC. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 31 DDFL4U FUSE BLOCKS DDFL4U(E)* DDFL4U - Double Level Fuse Terminal with fuse link on the top level has a separate feed through terminal at the lower level. This eliminates use of an additional feed through terminal. In DDFL4U(E), specially designed built in circuit gives light indication in the event of a fuse blow out at the top level. The terminal provides separate feed through connection possibility at the lower level. DDFL4U(LR): This is a modified version of DDFL4U(E) terminal where in two equipotential connection points are available on both ends of the terminal. Important: The disconnecting device is not suitable for interrupting load.The supply must be switched off before operating the slide link/lever. Fuses are sold separately Altech, see page 34 for details. Fuse not included. Fuse not included. Terminal Width 8 mm 8 mm Height x Length 66 x 88 mm 66 x 88 mm Stripping Length 9.5 mm 9.5 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 4 screw clamps 4 screw clamps Fusion Voltage 24V AC/DC, 48V AC/DC, 110V AC/DC, 220V AC Type of Fuse Used O5x20, O5x25 mm Approvals C US Wire Range 22-10 AWG Voltage Rating Current Rating Top Level Bottom Level Torque O5x20, O5x25 mm E220514 0.5-4 sq.mm 22-10 AWG 600 V 600 V 600 V 6.3 A 35 A 6.3 A 32 A 8A 35 A 7 lb-in 0.5 Nm 7 lb-in Cat. No. Std. Pk. C US 22-10 AWG E220514 0.5-4 sq.mm 22-10 AWG 600 V 600 V 600 V 6.3 A 35 A 6.3 A 32 A 8A 35 A 0.5 Nm 7 lb-in 7 lb-in Cat. No. Std. Pk. Terminal Block DDFL4U 20 DDFL4U(E)* 20 End Plate EPDDFL4U 25 EPDDFL4U 25 CA702 CA802 50 50 CA702 CA802 50 50 CA729/2 CA729/3 CA729/4 CA729/10 100 50 50 10 CA729/2 CA729/3 CA729/4 CA729/10 100 50 50 10 CA749/2 CA749/3 CA749/4 CA749/10 100 50 50 10 CA749/2 CA749/3 CA749/4 CA749/10 100 50 50 10 CA703/6 CA704/6 CA705/6 CA737/10 100 100 100 100 CA703/6 CA704/6 CA705/6 CA737/10 100 100 100 100 CA707/S/Q/3 100 CA707/S/Q/3 100 CA711/2 CA711/3 CA711/4 CA711/10 100 100 50 25 CA711/2 CA711/3 CA711/4 CA711/10 100 100 50 25 MT8 MT2 100 100 MT8 MT2 100 100 DIN Rail for ordering information refer to page 62 End Stop for ordering information refer to page 63 Internal Jumper COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB 2 pole 3 pole 4 pole 10 pole Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole Current Bar 2 pole 3 pole 4 pole 10 pole Shorting Sleeve & Screw External Jumper 2 pole 3 pole 4 pole 10 pole Marking Tags (MT Type) (MT Type on Lever) *Add required voltage to part number as a suffix. i.e. DDFL4U(E)/24 for 24V AC/DC. ** 25A @ 500 V, 10A @ 690V, 16A @ 500V for fast blow. 32 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com DDFL4ULR DDFL4U(E)LR* Fuse not included. Fuse not included. Terminal Width 8 mm 8 mm Height x Length 66 x 88 mm 66 x 88 mm Stripping Length 9.5 mm 9.5 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 4 screw clamps 4 screw clamps Fusion Voltage 24V AC/DC, 48V AC/DC, 110V AC/DC, 220V AC Type of Fuse Used O5x20, O5x25 mm Approvals C O5x20, O5x25 mm US E220514 Wire Range 22-10 AWG Voltage Rating 600 V 600 V 6.3 A 6.3 A 6.3 A 0.5 Nm 7 lb-in Current Rating Top Level Bottom Level Torque 0.5-4 sq.mm 22-10 AWG 7 lb-in Cat. No. Terminal Block End Plate 600 V Std. Pk. C US 22-10 AWG E220514 0.5-4 sq.mm 22-10 AWG 600 V 600 V 6.3 A 6.3 A 6.3 A 0.5 Nm 7 lb-in 7 lb-in Cat. No. 600 V Std. Pk. DDFL4ULR 20 DDFL4U(E)LR* 20 EPDDFL4U 20 EPDDFL4U 20 CA702 CA802 50 50 CA702 CA802 50 50 CA729/2 CA729/3 CA729/4 CA729/10 100 50 50 10 CA729/2 CA729/3 CA729/4 CA729/10 100 50 50 10 CA749/2 CA749/3 CA749/4 CA749/10 100 50 50 10 CA749/2 CA749/3 CA749/4 CA749/10 100 50 50 10 CA703/6 CA704/6 CA705/6 CA738/10 100 100 100 100 CA703/6 CA704/6 CA705/6 CA737/10 100 100 100 100 CA707/S/Q/3 100 CA707/S/Q/3 100 CA711/2 CA711/3 CA711/4 CA711/10 100 100 50 25 CA711/2 CA711/3 CA711/4 CA711/10 100 100 50 25 MT8 MT2 100 100 MT8 MT2 100 100 DIN Rail for ordering information refer to page 62 End Stop for ordering information refer to page 63 Internal Jumper 2 pole 3 pole 4 pole 10 pole Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole Current Bar 2 pole 3 pole 4 pole 10 pole Shorting Sleeve & Screw External Jumper 2 pole 3 pole 4 pole 10 pole Marking Tags (MT Type) (MT Type on Lever) *Add required voltage to part number as a suffix. i.e. DDFL4U(E)LR/24 for 24V AC/DC. 1 Left or right side connection. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 33 FUSE HOLDERS 1 POLE 2 POLE 3 POLE 17.5 mm 35 mm 52.5 mm Height x Length 77 x 63.5 mm 77 x 63.5 mm 77 x 63.5 mm Stripping Length 11 mm 11 mm 11 mm Insulation Material Aculon (R) Aculon (R) Aculon (R) Type of Connection 2 screw clamps 2 screw clamps 2 screw clamps O10 x 38 mm O10 x 38 mm O10 x 38 mm The main characteristics of fuse disconnectors are: * Compliance with IEC 60947-1, IEC 60947-3 * UL508 recognized * Plastic parts are made of material resistant to high temperatures * All contact surfaces are silver plated * Mounting on standard DIN 35 mm rail (DIN EN60715). * Available up to 4 pole * For all sizes a version with electronic indicator is available. There are two technical types of indicator: L (LED) with built in LED diode which blinks after the fuse-link operates. The internal circuit resistance is 2M, thus the total dissipation is minimal. The indicator is capable of operating in conditions of open circuit with minimum capacitance between connection cables. Operating voltage range spans from 50V to 690V AC and DC. Terminal Width (B) Fusion Voltage Type of Fuse Used Approvals C E212627 C US E212627 C US E212627 Wire Range 24-4 AWG 1.5-25sq.mm 24-4 AWG 24-4 AWG 1.5-25sq.mm 24-4 AWG 24-4 AWG 1.5-25sq.mm 24-4 AWG Voltage Rating 690 V 690 V 690 V Current Rating 32A Torque 31 lb-in 400 V** 690 V 32A** 32A 2-2.5 Nm 31 lb-in Cat. No. Std. Pk. 400 V** 690 V 32A** 32A 32A 31 lb-in 2-2.5 Nm 31 lb-in Cat. No. Std. Pk. 400 V** 690 V 32A** 32A 32A 31 lb-in 2-2.5 Nm 31 lb-in Cat. No. Std. Pk. Terminal Block Indicator: None LED Neon CB1038-1 CB1038-1/L CB1038-1/I 1 1 1 CB1038-2 CB1038-2/L CB1038-2/I 1 1 1 CB1038-3 CB1038-3/L CB1038-3/I 1 1 1 refer to page 63 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 I (NEON) with neon lamp, which is constantly lit after the fuse-link operates. The End Plate internal circuit resistance is 570k, thus it is necessary DIN Rail that the circuit be closed in for ordering information order for the indicator to refer to page 62 function. The operational voltage range is 100 V to 750 End Stop for ordering information V AC. * Fuses are sold separately Altech, see page 34 for details. US 79 mm (3.11 in.) 64.5 mm (2.54 in.) 47.5 mm (1.87 in.) 4 mm (0.16 in.) B 81 mm (3.19 in.) 37 mm (1.46 in.) 40 Dimension for B: 1 Pole 1 Pole + Neutral 2 Pole 3 Pole 3 Pole + Neutral 17.5mm 35mm 35mm 52.5mm 70mm Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Rated Current/ Rated Voltate gL/gG - Line Protection FUSES Cylinder Fuses are typically used in industrial applications to protect electrical devices such as motors, drives, etc. Standard: IEC 20269-4-1 and IEC60269-1 Rated Voltage: 500V They are available in four sizes with a current range from 1 to 125 Amps. Cylinder Fuses have metal caps at both ends, and a porcelain fuse body. Please refer to pg 34 for ordering information for Cylinder Fuse Bases. 10x38 OPERATING CLASSES gL/gG - Line Protection Slow, typically used for distribution circuits or resistive loads. Typical Markings: gL/gG *400V Standard: IEC 20269-4-1 and IEC60269-1 Rated Voltage: 500V aM - Motor Protection Fast acting short circuit protection, but slow acting overload protection. Typical Marking: aM aR - Semiconductor Protection 10x38 Typical Markings: Ultra RapidTM, SitorTM, SilcuTM, ProtisterTM, RecticurTM, Ultra QuickTM, aR *400V aR - Semiconductor Protection gR - Semiconductor Protection Standard: IEC 60269-4-1 Breaking Capacity: ~200 kA Rated Voltage: ~600V** Full range, short circuit protection for devices such as diodes, SCRs. etc. Typical Markings: Ultra RapidTM, SitorTM, SilcuTM, ProtisterTM, RecticurTM, Ultra QuickTM, gR Note: Other fuse sizes and fuse holders are available. Please refer to the Altech Eurpean Fuse catalog for more information. 10x38 In (A) 6 8 10 12 16 20 25 32 0.5A 1A 2A 4A 6A 8A 10A 12A 16A 20A 25A 32A* Cat. No. 2625005 2625006 2625007 2625008 2625009 2625011 2625013 2625015 Std. Pk. Cat. No. Std. Pk. 2620017 2620000 2620001 2620003 2620005 2620006 2620007 2620008 2620009 2620011 2620013 2620015 Rated Current/ Rated Voltate aM - Motor Protection Partial range, short circuit protection for devices such as diodes, SCRs. etc. 0.5A 1A 2A 4A 6A 8A 10A 12A 16A 20A 25A 32A* Cat. No. 10 10 10 10 10 10 10 10 10 10 10 10 2621017 2621000 2621001 2621003 2621005 2621006 2621007 2621008 2621009 2621011 2621013 2621015 Operating I2-value (As) 30 50 70 120 150 260 290 600 10 10 10 10 10 10 10 10 10 10 10 10 Power Dissipation (W) ** 6-25A (700V DC/ breaking capacity -- --- 50kA) 1.5 2 2.5 3 3.5 4.8 6 7.5 Std. Pk. 10 10 10 10 10 10 10 10 32A (400V DC/ breaking capacity -- --- 50kA) gR - Semiconductor Protection Standard: IEC 60269-4-1 Breaking Capacity: ~200 kA Rated Voltage: ~690V 6 mm (0.24 in.) O10.3 mm (0.4 in.) 6 mm (0.24 in.) 10.5 mm (0.4 in.) 38 mm (1.5 in.) 10.5 mm (0.4 in.) 10x38 Certified for 700V In (A) 1 2 4 6 8 10 12 16 20 25 30 Cat. No. 2645126 2645127 2645128 2645129 2645130 2645131 2645132 2645133 2645134 2645135 2645136 Operating I2-value (As) 1.6 8 8 25 39 66 87 166 280 580 1.010 Power Dissipation (W) 1 1.8 1.1 1.6 1.8 2.1 3.1 4.4 5.8 6.8 8.2 Std. Pk. 10 10 10 10 10 10 10 10 10 10 10 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 35 5 X 20 MINIATURE FUSES Miniature Fuses are typically used to protect electronic devices, laboratory and measurement instruments, stereos, TV's, VCR's etc. They are available in four sizes with a current range of 20mA to 20 Amps. Miniature Fuses are manufactured according to VDE 0820 part 1, VDE 0820 part 2, IEC publication 127, CEE publication 4 and actual DIN standards. The 5x20, 5x25 fuses can be used in the CSFL4U series terminal blocks. The 6.3x32 fuse can be used in the CAFL4U series terminal blocks. Operating Class: Slow, Typical Marking: "T" Medium, Typical Marking: "M" Fast, Typical Marking: "F" 5 X 25 upon request Voltage 250V AC/DC DIN 41662 DIN 41571-2 IEC-127-2/III Current 1 Not standard rating. 2 Rated Voltage 150V. 3 Rated Voltage 60V. 4 UL recognized version available upon request. Slow Cat. No. Medium upon request DIN 41661 IEC-127-2/II Fast Voltage 250V AC/DC DIN 41571-2 Voltage 250V AC/DC Cat. No. Medium Cat. No. Slow Fast 0.032M5x25M 0.04M5x25M 0.05M5x25M 0.063M5x25M 0.08M5x25M 0.1M5x25M 0.125M5x25M 0.16M5x25M 0.2M5x25M 0.25M5x25M 0.315M5x25M 0.032M6.3x32Tv 0.04M6.3x32Tv 0.05M6.3x32T4 0.063M6.3x32T4 0.08M6.3x32T4 0.1M6.3x32T4 0.125M6.3x32T4 0.16M6.3x32T4 0.2M6.3x32T4 0.25M6.3x32T4 0.315M6.3x32T4 0.05M6.3x32F 0.063M6.3x32F 0.08M6.3x32F 0.1M6.3x32F 0.125M6.3x32F 0.16M6.3x32F 0.2M6.3x32F 0.25M6.3x32F 0.315M6.3x32F 0.4M5x25M 0.5M5x25M 0.63M5x25M 0.8M5x25M 0.4M6.3x32T4 0.5M6.3x32T4 0.63M6.3x32T4 0.7M6.3x32T4 0.8M6.3x32T4 1.0M6.3x32T4 1.25M6.3x32T4 0.4M6.3x32F 0.5M6.3x32F 0.63M6.3x32F 0.7M6.3x32F 0.8M6.3x32F 1.0M6.3x32F4 1.25M6.3x32F4 1.6M6.3x32T4 2.0M6.3x32T4 2.5M6.3x32T4 1.6M6.3x32F4 2.0M6.3x32F4 2.5M6.3x32F2,4 3.15M6.3x32T4 4.0M6.3x32T4 5.0M6.3x32T4 6.3M6.3x32T4 7.0M6.3x32T4 8.0M6.3x32T4 10.0M6.3x32T4 12.5M6.3x32T4 16.0M6.3x32T4 20.0M6.3x32T4 3.15M6.3x32F2,4 4.0M6.3x32F2,4 5.0M6.3x32F3,4 6.3M6.3x32F3,4 7.0M6.3x32F3 8.0M6.3x32F3 10.0M6.3x32F3 12.5M6.3x32F3 16.0M6.3x32F3 20.0M6.3x32F3 20mA 32mA 40mA 50mA 63mA 80mA 100mA 125mA 160mA 200mA 250mA 315mA 0.08M5x20T4 0.1M5x20T4 0.125M5x20T4 0.16M5x20T4 0.2M5x20T4 0.25M5x20T4 0.315M5x20T4 0.05M5x20M 0.063M5x20M 0.08M5x20M 0.1M5x20M 0.125M5x20M 0.16M5x20M 0.2M5x20M 0.25M5x20M 0.315M5x20M 400mA 500mA 630mA 700mA 800mA 1.0A 1.25A 1.4A 1.6A 2.0A 2.5A 0.4M5x20T4 0.5M5x20T4 0.63M5x20T4 0.7M5x20T4 0.8M5x20T4 1.0M5x20T4 1.25M5x20T4 1.4M5x20T4 1.6M5x20T4 2.0M5x20T4 2.5M5x20T4 0.4M5x20M 0.5M5x20M 0.63M5x20M 0.7M5x20M 0.8M5x20M 1.0M5x20M 1.25M5x20M 1.4M5x20M 1.6M5x20M 2.0M5x20M 2.5M5x20M 0.4M5x20F4 0.5M5x20F4 0.63M5x20F4 0.7M5x20F4 0.8M5x20F4 1.0M5x20F4 1.25M5x20F4 1.6M5x20F4 2.0M5x20F4 2.5M5x20F4 2.0M5x25M 2.5M5x25M 3.15A 4.0A 5.0A 6.3A 7.0A 8.0A 10.0A 12.5A 16.0A 20.0A 3.15M5x20T4 4.0M5x20T4 5.0M5x20T4 6.3M5x20T4 3.15M5x20M 4.0M5x20M 5.0M5x20M 6.3M5x20M 3.15M5x20F4 4.0M5x20F4 5.0M5x20F4 6.3M5x20F4 3.15M5x25M 4.0M5x25M 5.0M5x25M 6.3M5x25M 8.0M5x20T1 10.0M5x20T1 12.5M5x20T1 16.0M5x20T1 20.0M5x20T1 8.0M5x20M 10.0M5x20M 12.5M5x20M1 16.0M5x20M1 20.0M5x20M1 8.0M5x20F1 10.0M5x20F1 12.5M5x20F1 16.0M5x20F1 20.0M5x20F1 8.0M5x25M1 10.0M5x25M1 16.0M5x25M1 0.02M5x20M 0.032M5x20M 0.05M5x20T4 Std. Pk. 10 36 6.3 X 32 (1/4" X 1-1/4") 0.05M5x20F4 0.1M5x20F4 0.125M5x20F4 0.16M5x20F4 0.2M5x20F4 0.25M5x20F4 0.315M5x20F4 1.0M5x25M 1.25M5x25M 1.6M5x25M Std. Pk. 10 Std. Pk. 10 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com THERMOCOUPLE TERMINAL BLOCK CTT2.5UK/J/T/E Altech thermocouple terminal blocks are designed for use in temperature measuring circuits. The current carrying part of the terminal blocks have the same material (according to DIN437134 and DIN43714) which is used for compensating cables in the temperature measTerminal Width urement circuit (up to 200C). Thus fulfilling the norms stated Height x Length in DIN EN60584. The terminal block is marked for the respective type of thermocouple which enables easy identification for wiring. * CTT2.5UK `K' type Chromel (NiCr) Alumel (NiAl) 10 mm 45 x 43 mm Stripping Length 9 mm Insulation Material Polyamide 6.6 Current Carrying Material Chromel/Alumel (NiCr/NiAl) Type of Connection 4 screw clamps Ratings: * CTT2.5UJ `J' type Iron (Fe) Constantan (CuNi) * CTT2.5UT `T' type Copper (Cu) Constantan (CuNi) 22-12 AWG Wire Range Voltage Rating 300 V Current Rating 10 A 7 lb-in Torque * CTT2.5UE `E' type Chromel (NiCr) Constantan (CuNi) Cat. No. Std. Pk. Terminal Block CTT2.5UK CTT2.5UJ CTT2.5UT CTT2.5UE 50 50 50 50 End Plate EP2.5/4UN 50 Isolation Plate PP2.5/4UN 50 CA802 CA702 100 100 DIN Rail for ordering information refer to page 63 COLOR BLOCKS (other than grey standard) End Clamp When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 37 CSTSN4U Stud Type Terminal Blocks CSTSN5U Altech DIN rail mounting Stud Type Terminal Blocks are preferred for the connections that are subjected to very severe vibrations. The wire is crimped to a ring / fork type lug and is screwed on to the flat current bar in terminal. The range includes terminal blocks for wires of size 22-4 AWG. Jumpering can be achieved with the aid of external jumpers. The jumpers are insulated to make them shock proof. The terminal blocks have marker holding recess to accommodate MT type marking tags. It is recommended to use protective covers in transparent plastic because assemblies of these terminals blocks are not fully covered. Terminal Width 17 mm 17 mm Height x Length 44.5 x 50 mm 44.5 x 50 mm Stripping Length 12 mm 12 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw connection for M4 ring/fork lugs 2 screw connection for M5 ring/fork lugs Approvals C 1 US Wire Range 22-6 AWG Voltage Rating E220514 1.5-10 sq.mm 22-6 AWG 600 V 800 V 600 V Current Rating 65 A 57 A 65 A Torque 14 lb-in 1.2 Nm 14 lb-in Cat. No. Std. Pk. C 1 US 22-4 AWG E220514 1.5-16 sq.mm 22-4 AWG 600 V 800 V 600 V 80 A 76 A 80 A 2.0 Nm 17.5 lb-in 17.5 lb-in Cat. No. Std. Pk. Terminal Block CSTSN4U 100 CSTSN5U 100 End Plate EPCSTSN5U 50 EPCSTSN5U 50 CA702 CA802 50 50 CA702 CA802 50 50 for ordering information refer to page 62 DIN Rail for ordering information refer to page 63 End Stop COLOR BLOCKS Protective Cover for covering 2 Terminal 3 Terminal CSTSPC1 CSTSPC1-1 100 100 CSTSPC1 CSTSPC1-1 100 100 Protective Cover in Length 100 mm 200 mm 300 mm CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 10 10 10 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 10 10 10 (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown 1 38 Ordering Suffix R BU BL O G Y W BG DB Insulated Removable Jumpers 2 way 3 way 4 way CA514/1-2 CA514/1-3 CA514/1-4 100 50 50 CA514/1-2 CA514/1-3 CA514/1-4 100 50 50 Insulated Permanent Jumpers 2 way 3 way 4 way CA514/3-2 CA514/3-3 CA514/3-4 100 50 50 CA514/3-2 CA514/3-3 CA514/3-4 100 50 50 MT2 100 MT2 100 Marking Tags (MT Type) Approval pending. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com CSTSB4U CSTSB5U Terminal Width 17 mm 17 mm Height x Length 44.5 x 50 mm 44.5 x 50 mm Stripping Length 12 mm 12 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw connection for M4 ring/fork lugs 2 screw connection for M5 ring/fork lugs Approvals C US 1 Wire Range 22-6 AWG Voltage Rating E220514 1.5-10 sq.mm 22-6 AWG 600 V 800 V 600 V Current Rating 65 A 57 A 65 A Torque 14 lb-in 1.2 Nm 14 lb-in Cat. No. Std. Pk. C US 1 22-4 AWG E220514 1.5-16 sq.mm 22-4 AWG 600 V 800 V 600 V 80 A 76 A 80 A 2.0 Nm 17.5 lb-in 17.5 lb-in Cat. No. Std. Pk. Terminal Block CSTSB4U 100 CSTSB5U 100 End Plate EPCSTN5U 50 EPCSTN5U 50 CA702 CA802 50 50 CA702 CA802 50 50 for ordering information refer to page 62 DIN Rail for ordering information refer to page 63 End Stop Protective Cover for covering 2 Terminal 3 Terminal CSTSPC1 CSTSPC1-1 100 100 CSTSPC1 CSTSPC1-1 100 100 Protective Cover in Length 100 mm 200 mm 300 mm CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 10 10 10 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 10 10 10 Insulated Removable Jumpers 2 way 3 way 4 way CA514/1-2 CA514/1-3 CA514/1-4 100 50 50 CA514/1-2 CA514/1-3 CA514/1-4 100 50 50 Insulated Permanent Jumpers 2 way 3 way 4 way CA514/3-2 CA514/3-3 CA514/3-4 100 50 50 CA514/3-2 CA514/3-3 CA514/3-4 100 50 50 MT2 100 MT2 100 Marking Tags (MT Type) 1 Approval pending. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 39 CDL4U(E)D1/D2 INDICATOR/ DIODE CIRCUITS 35 or 32mm DIN Rail Altech offers different types of terminals incorporating electronic components for signal converting, circuit protection and status indication. Based on customer requirements, specially assembled terminals are offered. CDL4U(O) - Double level terminal with open lower current bar to accommodate electronic components like diodes, resistors, LEDs, etc. Diode Specifications Diode 1N 4007 Diode Reverse Voltage 1000 V Diode Current 1A CDL4U(E)D3 With arc suppression circuit for contactors and solenoid valves - DC Diode circuit for reverse polarity protection Terminal Width 6 mm 6 mm Height x Length 54 x 55.5 mm 54 x 55.5 mm Terminal Voltage 300 V~ 300 V~ Stripping Length 9 mm 9 mm C Approvals US E220514 Wire Range 22-10 AWG 0.5-4 sq.mm 22-10 AWG Voltage Rating 600 V 400 V 600 V Current Rating 25 A 32 A 35 A Torque 7 lb-in 0.5 Nm 7 lb-in Cat. No. Std. Pk. C US E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG 600 V 400 V 600 V 25 A 32 A 35 A 7 lb-in 0.5 Nm 7 lb-in Cat. No. Std. Pk. Terminal Block CDL4U(E)D1 CDL4U(E)D2 100 100 CDL4U(E)D3 100 End Plate EPCDL4U 50 EPCDL4U 50 CA702 CA802 50 50 CA702 CA802 50 50 CA727/2 CA727/3 CA727/4 CA727/10 10 10 10 10 CA727/2 CA727/3 CA727/4 CA727/10 10 10 10 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 Shorting Sleeve & Screw CA607/S/Q 100 CA607/S/Q 100 Marking Tags MT2 100 MT2 100 DIN Rail for ordering information refer to page 62 End Stop for ordering information refer to page 63 2 pole 3 pole 4 pole 10 pole Internal Jumper Current Bars COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole (MT Type) Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB 1 2 C 3 2 1 4 3 4 C D3 D1 2 1 C 3 4 D2 40 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com CDL4U(E)DD1/DD2 CDL4U(E)DD3/DD4 Diode circuit for lamp testing CDL4U(E)D4 Diode circuit for lamp testing CDL4U(E)DD5 Diode circuit for lamp testing with LED series resistance Diode circuit for lamp testing with LED series resistance 6 mm 6 mm 6 mm 6 mm 54 x 55.5 mm 54 x 55.5 mm 54 x 55.5 mm 54 x 55.5 mm 300 V~ 300 V~ 24 V- 24 V~ 9 mm 9 mm 9 mm 9 mm C US E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG C US E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG C US E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG C US E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG 600 V 400 V 600 V 600 V 400 V 600 V 600 V 400 V 600 V 600 V 400 V 600 V 25 A 32 A 35 A 25 A 32 A 35 A 25 A 32 A 35 A 25 A 32 A 35 A 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. CDL4U(E)DD1 100 CDL4U(E)DD2 100 CDL4U(E)DD3 100 CDL4U(E)DD4 100 CDL4U(E)D4 100 CDL4U(E)DD5 100 EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA727/2 CA727/3 CA727/4 CA727/10 10 10 10 10 CA727/2 CA727/3 CA727/4 CA727/10 10 10 10 10 CA727/2 CA727/3 CA727/4 CA727/10 10 10 10 10 CA727/2 CA727/3 CA727/4 CA727/10 10 10 10 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA607/S/Q 100 CA607/S/Q 100 CA607/S/Q 100 CA607/S/Q 100 MT2 100 MT2 100 MT2 100 MT2 100 1 DD1 1 3 C C 3 DD2 +4 C +3 1 2 C C 2 1 2 -4 +3 C DD3 C 1 +4 C D4 2 C 3 2 1 2 +4 3 C C +4 DD5 +4 DD4 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 41 CDL4U(E)N1 CDL4U(E)LD5* CDL4U(E)LD3* AC voltage indicator with neon lamp AC voltage indicator with LED AC/ DC voltage indicator with LED Terminal Width 6 mm 6 mm 6 mm Height x Length 54 x 55.5 mm 54 x 55.5 mm 54 x 55.5 mm Terminal Voltage 100 V~ to 220 V 24 V~, 48 V~, 120V~, 220V~ 12 V~, 24 V~ Stripping Length 9 mm 9 mm 9 mm Approvals C US E220514 0.5-4 sq.mm 22-10 AWG C US E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG C US 22-10 AWG E220514 0.5-4 sq.mm 22-10 AWG Wire Range 22-10 AWG Voltage Rating 600 V 400 V 600 V 600 V 400 V 600 V 600 V 400 V 600 V Current Rating 25 A 32 A 35 A 25 A 32 A 35 A 25 A 32 A 35 A Torque 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CDL4U(E)N1 50 CDL4U(E)LD5* 50 CDL4U(E)LD3* 50 End Plate EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA727/2 CA727/3 CA727/4 CA727/10 10 10 10 10 CA727/2 CA727/3 CA727/4 CA727/10 10 10 10 10 CA727/2 CA727/3 CA727/4 CA727/10 10 10 10 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 Shorting Sleeve & Screw CA607/S/Q 100 CA607/S/Q 100 CA607/S/Q 100 Marking Tags MT2 100 MT2 100 MT2 100 DIN Rail for ordering information refer to page 62 End Stop for ordering information refer to page 63 Internal Jumper 2 pole 3 pole 4 pole 10 pole Current Bars 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole (MT Type) 2 1 3 4 N1 +1 1 3 C LD5 4 +3 +4 LD3 * Add required voltage to part number as a suffix i.e. CDL4U(E)LD5/110 is for 110V. 42 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com CDL4U(E)LD4* CDL4U(E)L1/L2* CDL4U(O) DC voltage indicator with LED Electronic Component Carrier CDL4U(E)LD1/LD2 AC/ DC voltage indicator with LED DC voltage indicator with LED 6 mm 6 mm 6 mm 6 mm 54 x 55.5 mm 54 x 55.5 mm 54 x 55.5 mm 54 x 55.5 mm 24 V~ 24 V- 6 V-, 24 V-, 60 V- - 9 mm 9 mm 9 mm 9 mm C US E220514 22-10 AWG C US E220514 E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG 22-10 AWG 600 V 400 V 600 V 600 V 400 V 600 V 600 V 400 V 600 V 25 A 32 A 35 A 25 A 32 A 35 A 25 A 32 A 35 A 0.5 Nm 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 7 lb-in Cat. No. Std. Pk. 0.5-4 sq.mm 22-10 AWG US 0.5-4 sq.mm 7 lb-in 22-10 AWG C 7 lb-in Cat. No. 7 lb-in Cat. No. Std. Pk. Std. Pk. C US 22-10 AWG E220514 0.5-4 sq.mm 22-10 AWG 600 V 400 V 600 V 25 A 32 A 35 A 0.5 Nm 7 lb-in 7 lb-in Cat. No. Std. Pk. CDL4U(E)LD4* 50 CDL4U(E)LD1 CDL4U(E)LD2 50 50 CDL4U(E)L1* CDL4U(E)L2* 50 50 CDL4U(O) 100 EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA727/2 CA727/3 CA727/4 CA727/10 10 10 10 10 CA727/2 CA727/3 CA727/4 CA727/10 10 10 10 10 CA727/2 CA727/3 CA727/4 CA727/10 10 10 10 10 CA727/2 CA727/3 CA727/4 CA727/10 10 10 10 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA607/S/Q 100 CA607/S/Q 100 CA607/S/Q 100 CA607/S/Q 100 MT2 100 MT2 100 MT2 100 MT2 100 -1 +3 C +4 +1 C -3 LD4 -1 +3 +1 -4 -3 LD1 C LD2 -4 -1 +4 L1 +3 +4 L2 * Add required voltage to part number as a suffix i.e. CDL4U(E)LD5/110 is for 110V. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 43 CDL4U(E)LA CDL4U(E)3LA Lightning Arrestor 3 Pole Lightning Arrestor Terminal Width 12 mm 18 mm Height x Length 54 x 55.5 mm 54 x 55.5 mm Stripping Length 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 4 screw clamps 4 screw clamps 22-10 AWG 22-10 AWG 75, 90, 240, 600, 1000 V DC 90, 250, 350, 450 V DC 20 KA (8/20 s) 10 KA (8/20 s) - - 100 ns 100 ns 10A 5A Capacitance <1.5 pf <1.0 pf Application For coarse line protection of measuring, distributing or data communication interfaces. For simultaneous protection of lines against transversal (line/line) and longitudinal (line/earth) surge. SURGE SUPPRESSOR TERMINAL BLOCKS In applications where circuit protection against transient overvoltage is required, Altech Surge Suppressor Terminal Blocks with built-in electronic components are recommended. These terminals are designed to protect a single line against a longitudinal (line / earth) surge, thereby protecting distribution and inputs. Ratings Wire Range Voltage Rating Nominal Discharge Current Peak Current Response Time Nominal Current Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CDL4U(E)LA* 20 CDL4U(E)3LA* 20 End Plate EPCDL4U 50 EPCDL4U 50 CA702 CA802 50 50 CA702 CA802 50 50 MT2 100 MT2 100 DIN Rail for ordering information refer to page 62 End Stop COLOR BLOCKS (other than grey standard) for ordering information refer to page 63 Marking Tags (MT Type) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown 44 Ordering Suffix R BU BL O G Y W BG DB * Add required voltage to part number as a suffix i.e. CDL4U(E)LA/75 is for 75V. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com CDL4U(E)MOV1 CDL4U(E)SD CDL4U(E)RC Suppressor Diode RC Circuit 12 mm 12 mm 18 mm 54 x 55.5 mm 54 x 55.5 mm 54 x 55.5 mm 9 mm 9 mm 9 mm Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 4 screw clamps 4 screw clamps 4 screw clamps 22-10 AWG 22-10 AWG 22-10 AWG 130 V AC* 12-48V DC / 12-160V AC** 250 V AC / 330 V DC - 1.5 KA (8/20 s) 20A 2kA-6.5kA (8/20 s) - - <25ns 1 ns DC / 5 ns AC - 10A 10A 10A - 0.1 f or 0.22 f For fine protection of data interfcaes, sensors, contacts, etc. For protection of DC solenoid valves and contactors MOV 100-20,000 pf For protection from voltage surge, spikes 2 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. CDL4U(E)MOV 20 CDL4U(E)SD 20 CDL4U(E)RC 10 EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 MT2 100 MT2 100 MT2 100 1 A fuse block is recommended to protect MOV terminals by disconnecting the faulted varistor. See pages 28-30 for fuse blocks. * Other voltages available upon request. Call Altech for voltage selection. ** Phase to Phase / Phase to ground. Call Altech for voltage selection. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 45 CTC4U TAB, TERMI-POINT(R) TERMINAL BLOCKS CTS4U-TM CTC4U Tab Connection terminals offer quick connection. Connection is achieved by pushing the lug onto the tab blade of the terminal block. The terminal housing is so designed that the wall protrudes beyond the tab blades. The CTS4U-TM single level and the CDL4U-TM double level terminal blocks have a provision for clip connection according to DIN 41611-4. Three wires (0.5 sq. mm) can be connected with a clip onto the pin using a special tool (contact Altech for information). These terminal blocks provide high wiring density without extension of the mounting rail. CTC4U is used primarily in railway systems. The CTS4U-TM and the CDL4UTM is used mostly in the telecommunications industry. CDL4U-TM Connection Points Terminal Width 6 mm 6 mm 6 mm Height x Length 49.5 x 47 mm 67 x 43 mm 84 x 55.5 mm Stripping Length 9 mm 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Type of Connection 1 srew connection and 1 blade for 2 srew connections and 2 blades 5 tab connection points and for 6 (0.5 sq. mm) connections 1 tapped hole for cross connection 3 (0.5 sq. mm) connections Approvals 0.5-4 sq.mm 22-12 AWG 0.5-4 sq.mm 22-12 AWG 0.5-4 sq.mm 22-12 AWG Voltage Rating 250 V 300 V 250 V 300 V 250 V 300 V Current Rating 32 A 25 A 10 A 10 A 10 A 10 A 6.3 x 0.8 6.3 x 0.8 0.8 x 1.6 0.8 x 1.6 0.8 x 1.6 0.8 x 1.6 Rated Cross Section Tab Blade Size (mm) Cat No. Std. Pk. Cat No. Std. Pk. Cat No. Std. Pk. Terminal Block CTC4U 100 CTS4U-TM 100 CDL4U-TM 100 End Plate EPCTC4U 50 EP2.5/4UN 50 EPCDL4U 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 DIN Rail for ordering information refer to page 62 End Stop for ordering information refer to page 63 COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown 46 Internal Jumper 2 way 3 way 4 way 10 way CA727/2 CA727/3 CA727/4 CA727/10 100 50 50 10 CA722/2 CA722/3 CA722/4 CA722/10 100 50 50 10 CA727/2 CA727/3 CA727/4 CA727/10 10 10 10 10 Insulated Internal Jumper 2 way 3 way 4 way 10 way CA747/2 CA747/3 CA747/4 CA747/10 100 50 50 10 CA742/2 CA742/3 CA742/4 CA742/10 100 50 50 10 CA747/2 CA747/ CA747/ CA747/10 100 50 50 10 Current Bars 2 way 3 way 4 way 10 way 10 pole (breakable) 100 pole Ordering Suffix R BU Shorting Sleeve & Screw BL O External G Jumper Y W BG DB Marking Tags (MT Type) CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA607/S/Q 100 CA707/S/Q/01 100 CA607/S/Q 100 CA713/2 CA713/3 CA713/4 CA713/10 100 100 50 25 CA714/2 CA714/3 CA714/4 CA714/10 100 100 50 25 MT6 100 MT2 100 2 pole 3 pole 4 pole 10 pole MT6 100 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com CB4 HIGH TEMPERATURE CERAMIC EUROBLOCKSTM Suitable for use in high temperature applications up to 600C (1112F). Applications include hot melt glue guns, furnaces, heaters, process equipment and machinery. Terminal blocks are offered with mounting holes for panel mounting or free floating applications. Ceramic Insulation Material * * * * Compact, space saving Tubular screw clamp Free float or panel mount Temperature range: 600C (1112F) * Standard color: white * Material Housing: ceramic Clamp: brass Screws: zinc plated steel Approvals C US C Wire Range 24-12 AWG 24-12 AWG E220514 CB6 CB16 Ceramic Ceramic US C E220514 22-10 AWG 20-10 AWG US E220514 20-6 AWG 18-6 AWG Voltage Rating 300V 300V 300V 300V 300V 300V Current Rating 30 A 20 A 40 A 30 A 76 A 65 A No. of Poles 1 (free floating) 2 (free floating) 2 (with mounting holes) 3 (free floating) 3 (with mounting holes) 1 Pole H Std. Pk. Cat. No. Std. Pk. CB4/1 CB4/2 CB4/2H CB4/3 CB4/3H 50 50 50 50 50 CB6/1 50 CB6/2H 50 CB16/2H 50 CB6/3H 50 CB16/3H 50 2 Pole 2 Pole with mounting hole T T T W1 Cat. No. C2 T W3 W3 H H D2 Std. Pk. 3 Pole with mounting hole D1 H H 3 Pole T W2 W2 Cat. No. D1 C3 D2 Dimensions mm W T H C D1 CB4/1 CB4/2 CB4/2H CB4/3 CB4/3H 1 2 2 3 3 POLE POLE POLE POLE POLE 23 23 23 25 25.4 11 18 24 25 36 18.5 18.5 18.5 18.5 18.5 * * 14.6 * 13 CB6/1 CB6/2H CB6/3H 1 POLE 2 POLE 3 POLE 25 25.5 25.5 12 26 41 19.5 19.5 19.5 * 12.6 15 6 6 CB16/2H CB16/3H 2 POLE 3 POLE 28 27.5 31 48 23.2 23.2 16.5 17 6 6 D2 Fixing Screw Stripping Length 6 3.5 M3X16 6 3.5 M3X16 6 6 6 6 6 M3X16 M3X16 6 6 6 M3X20 M3X20 8.5 8.5 3.5 3.5 Note: All dimensions are shown in mm, to convert to inches please divide by 25.4. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 47 CMT4 MINI FEED-THROUGH 15mm DIN Rail CMT4S For wire-to-wire connecting in control, automation, instrumentation and power distribution applications. Altech "miniature" terminal blocks offer tremendous space advantage as demanded by certain wiring configurations. FUSE BLOCKS Terminal Width 6 mm 6 mm Certain electrical and control systems require protection by fuses. The terminal has a hinged carrier that has a specially designed space for a cartridge type glass fuse of size O5 x 20 or O5 x 25 mm. The fuse can be engaged or disengaged by the movement of the carrier. Height x Length 29 x 27 mm 29 x 46 mm Stripping Length 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw clamps & 1 tapped hole for cross connection -- 2 screw clamps, 2 solder points and 1 tapped hole for cross connection -- Type of Fuse Used Approvals Altech fuse terminals are also available with light indication CSFL 4U (L). A specially designed built-in circuit gives light indication in the event of fuse blow out. Fuses are sold separately Altech, see page 34 for details. C US Wire Range 22-10 AWG Voltage Rating E220514 C US E220514 0.5-4 sq.mm 22-10 AWG 300 V 400 V 300 V 300 V 160 V 300 V Current Rating 35 A 32 A 35 A 25 A 15 A 35 A Torque 6 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in 22-12 AWG Upto 1.5 sq.mm 22-10 AWG Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CMT4 100 CMT4S 50 End Plate EPCMT4 50 EPCMT4 50 Isolation Partition PPCMT4 50 PPCMT4 50 DIN Rail for ordering information refer to page 62 15 mm End Stop 15 mm CA602 100 CA602 50 2 pole 3 pole 4 pole 10 pole CA727/2 CA727/3 CA727/4 CA727/10 100 50 50 10 CA727/2 CA727/3 CA727/4 CA727/10 100 50 50 10 2 pole 3 pole 4 pole 10 pole CA747/2 CA747/3 CA747/4 CA747/10 100 50 50 10 CA747/2 CA747/3 CA747/4 CA747/10 100 50 50 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA607/S/Q 100 CA607/S/Q 100 CA714/2 CA714/3 CA714/4 CA714/10 100 100 50 25 CA714/2 CA714/3 CA714/4 CA714/10 100 100 50 25 MT2 100 MT2 100 for ordering information refer to page 63 COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB * Add required voltage to part number as a suffix, i.e. CSFL4U(L)/24 fo 24V DC 48 Internal Jumper Insulated Internal Jumper Current Bars 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole Shorting Sleeve & Screw External Jumper 2 pole 3 pole 4 pole 10 pole Marking Tags (MT Type) (MT Type on Lever) Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com CMT4SU CSFL4U(L)* CSFL4U Fuse not included. CGMT4 Fuse not included. 6 mm 8 mm 8 mm 6 mm 29 x 35.5 mm 43 x 58 mm 43 x 58 mm 28.5 x 27 mm 9 mm 9.5 mm 9.5 mm 9 mm Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 2 uneven level solder points & 1 tapped hole for cross connection -- 2 screw clamps 2 screw clamps 2 screw clamps US C E220514 O5x20, O5x25mm C US O5x20, O5x25mm E220514 US 22-10 AWG 300 V 160 V 300 V 600 V 600 V 600 V 600 V 600 V 600 V 15 A 15 A 20 A 6.3 A 6.3 A 8A 6.3 A 6.3 A 8A - - 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in Cat. No. Std. Pk. Cat. No. Cat. No. Std. Pk. 22-10 AWG E220514 22-14 AWG Upto 1.5 sq.mm 22-14 AWG - 0.5-4 sq.mm 22-10 AWG C -- 0.5-4 sq.mm 22-10 AWG C US E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG 7 lb-in 0.5 Nm 7 lb-in Std. Pk. Cat. No. Std. Pk. CMT4SU 100 CSFL4U 100 CSFL4U(L)* 100 CGMT4 50 EPCMT4 50 EPCSFL4U 50 EPCSFL4U 50 PPCMT4 50 PPCSFL4U 50 PPCSFL4U 50 15 mm CA602 50 CA727/2 CA727/3 CA727/4 CA727/10 100 50 50 10 CA747/2 CA747/3 CA747/4 CA747/10 100 50 50 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 10 10 10 10 100 10 CA607/S/Q 10 MT2 100 15 mm CA602 100 CA602 100 CA711/2 CA711/3 CA711/4 CA711/10 100 100 50 25 CA711/2 CA711/3 CA711/4 CA711/10 100 100 50 25 MT8 MT2 100 100 MT8 MT2 100 100 MT2 100 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 49 CMB4 MINI FEED-THROUGH Panel Mount For use when space constraints require extremely compact solutions and internal jumping is required. Individual components can be used to build your own assemblies. Just snap the required number of terminal block components together and place a Mounting Section on each end. The CMB 4 accepts internal jumpers and standard marking tags. * Extremely compact and cost effective * High density * Screw-cage clamp * Internal jumping provision * Polyamide 6.6 * Standard color: gray EP CMB4 Preassembled blocks are also available for quick and easy installations. Terminal Width 6 mm Height x Length 28 x 27 mm Stripping Length 9 mm Insulation Material Polyamide 6.6 Type of Connection 2screwclamps&1tappedholeforcrossconnection Approvals C See Dimensions below. US E220514 Wire Range 22-10 AWG 0.5-4 sq.mm 22-10 AWG Voltage Rating 300 V 400 V 300 V Current Rating 35 A 32 A 35 A Torque 7 lb-in 0.5 Nm 7 lb-in Cat. No. Std. Pk. Terminal Block CMB4 100 Mounting Section EPCMB4 50 Separator Plate SPCMB4 100 Mounting Screw* COLOR BLOCKS (other than grey standard) Internal Jumper 2 pole 3 pole 4 pole 10 pole CA727/2 CA727/3 CA727/4 CA727/10 100 50 50 10 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole CA747/2 CA747/3 CA747/4 CA747/10 100 50 50 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA607/S/Q 100 CA714/2 CA714/3 CA714/4 CA714/10 100 100 50 25 MT2 100 Current Bars When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole Shorting Sleeve & Screw 2 pole 3 pole 4 pole 10 pole External Jumper Marking Tags (MT Type) b a Dimensions mm (in.) CMB4 No. of Cat No. Poles CMB4/2 2 CMB4/3 3 CMB4/4 4 CMB4/5 5 CMB4/6 6 CMB4/7 7 CMB4/8 8 CMB4/9 9 CMB4/10 10 CMB4/11 11 CMB4/12 12 CMB4/13 13 CMB4/14 14 CMB4/15 15 CMB4/16 16 CMB4/17 17 CMB4/18 18 CMB4/19 19 CMB4/20 20 CMB4/21 21 CMB4/22 22 CMB4/23 23 CMB4/24 24 Hole Width (a) Spacing (b) 26 (1.02) 19 (0.75) 32 (1.26) 25 (0.98) 38 (1.50) 31 (1.22) 44 (1.73) 37 (1.46) 50 (1.97) 43 (1.69) 56 (2.20) 49 (1.93) 62 (2.44) 55 (2.17) 68 (2.68) 61 (2.40) 74 (2.91) 67 (2.64) 80 (3.15) 73 (2.87) 86 (3.39) 79 (3.11) 92 (3.62) 85 (3.35) 98 (3.86) 91 (3.58) 104 (4.09) 97 (3.82) 110 (4.33) 103 (4.06) 116 (4.57) 109 (4.29) 122 (4.80) 115 (4.53) 128 (5.04) 121 (4.76) 134 (5.28) 127 (5.00) 140 (5.51) 133 (5.24) 146 (5.75) 139 (5.47) 152 (5.98) 145 (5.71) 158 (6.22) 151 (5.94) Mounting Section EPCMB4 * Any length M3 screw may be used. 50 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com CENC4 BUSBAR SYSTEM Panel Mount CENC16 CENC35 A quick reliable solution for ground, neutral or low voltage distribution applications. The Busbar System consists of a busbar, busbar supports, and screw clamp terminals for terminating wires NEB 10 (10 x 3 mm) and NEB 6 (6 x 6 mm), tin plated copper busbars are available in one meter lengths. Both have a 140A current carrying capacity. NES plastic support with fixing screws for holding 10 x 3 & 6 x 6 busbar makes placing of busbar an easy task. Busbars up to 200 mm length should be supported at ends by two busbar supports. For busbars exceeding 200 mm length, it is recommended to provide intermediate busbar support. Easy to operate CENC clamp secures wire to the busbar. Terminal Width 7.5 mm 9.8 mm 14.5 mm Height x Length 30 x 23.3 mm 36 x 23.3 mm 45 x 27.3 mm Stripping Length 12 mm 16 mm 16 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Type of Connection 1 screw clamp connection 1 screw clamp connection 1 screw clamp connection Approvals C US E220514 C US E220514 C US E220514 Wire Range 22-12 AWG 0.5-6 sq.mm 22-12 AWG 9-6 AWG 6-16 sq.mm 10-6 AWG 7-2 AWG 10-35 sq.mm 8-2 AWG Current Rating* 25 A Torque 14 lb-in 41 A 0.8 Nm 76 A 14 lb-in 76 A 125 A 14 lb-in 2.0 Nm 17.5 lb-in Cat. No. 25 lb-in 2.5 Nm 25 lb-in Cat. No. Std. Pk. Terminal Block Green Cap ** CENC4 50 Busbar (10 x 3 mm) NEB10 1m NEB10 1m NEB10 1m Busbar (6 x 6 mm) NEB6 1m NEB6 1m NEB6 1m Plastic Support with Fixing Screw NES 50 NES 50 NES 50 End Clamp/Bus bar support for rail mounting CA202 50 CA202 50 CA202 50 Marking Tags (MT Type) MT5 100 MT6 100 MT6 100 CENC16 Std. Pk. 125 A 50 Cat. No. CENC35 Std. Pk. 50 * 140A current carrying capacity of busbar should be taken into account while connecting loads. ** Consult for other available colors. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 51 CSC2.5T FEED-THROUGH Spring Clamp Terminals These terminal blocks offer a time saving alternative to the popular screw clamp connection. They can be mounted on 35 mm DIN rails. Insulated push-in type jumpers offer a quick and shock Terminal Width proof solution for most cross-connection appli- Height x Length cations. MULTI-CONNECTION Spring Clamp Terminals Altech Multiple connec- 6 mm 8 mm 36 x 58 mm 42 x 65 mm 45 x 72 mm Stripping Length 9 mm 9 mm 12 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Type of Connection 2 spring clamps & 2 slots for interconnection 2 spring clamps & 2 slots for interconnection 2 spring clamps & 2 slots for interconnection Approvals Wire Range The terminals provide of further multiplication Partition Plate connections through DIN Rail bridging. The Multiple for ordering information refer to page 62 Connection Terminal Blocks can even be End Stop bridged to Standard for ordering information Feed Through Spring refer to page 63 Clamp Terminal Block of Jumpers Adjacent respective wire size Alternate (CSC2.5T / CSC4T / CSC6T). Push in type wire jumper Marking Tags (MT Type) COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. 52 CSC6T 5 mm tion Spring Clamp terminals offer Voltage Rating a reliable solution for problems posed by Current Rating multiple voltage connections. The terminal eliminates conventional method of cross connection / Terminal Block looping, saving additional space. End Plate Example: CTS2.5U-N/R CSC4T Color Red Blue Black Orange Green Yellow White Beige Dark Brown C US E220514 C US E220514 22-14 AWG 0.5-2.5 sq.mm 22-14 AWG 22-12AWG 0.5-4 sq.mm 22-12 AWG 600 V 750 V 600 V 600 V 750 V 600 V 20 A 24 A 20 A 25 A 32 A 25 A Cat. No. . CSC2.5T Std. Pk. Cat. No. 100 EPCSC2.5T C US 22-8AWG E220514 0.5-8sq.mm 22-8AWG 600 V 750 V 600 V 50 A 41 A 50 A Std. Pk. Cat. No. Std. Pk. CSC4T 100 CSC6T 50 50 EPCSC4T 50 EPCSC6T 50 PPCSC2.5T 50 PPCSC4T 50 PPCSC6T 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA801/1 CA801/1-3 100 100 CA801/2 CA801/2-3 100 100 CA801/3 CA801/3-3 100 100 CA901/1 100 CA901/2 100 CA901/3 100 MT5 100 MT6 100 MT8 100 Ordering Suffix R BU BL O G Y W BG DB Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com CSC10T CSC2.5T1-2 CSC2.5T2-2 CSC4T1-2 10 mm 5 mm 5 mm 6 mm 50 x 75 mm 36 x 74 mm 36 x 90 mm 42 x 85 mm 12 mm 9 mm 9 mm 9 mm Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 2 spring clamps & 2 slots for interconnection 3 spring clamps & 2 slots for interconnection 4 spring clamps & 2 slots for interconnection 3 spring clamps & 2 slots for interconnection * C * US 16-6 AWG E220514 1.5-10 sq.mm. 16-6AWG C US E220514 C US E220514 C US 22-14 AWG 0.5-2.5 sq.mm. 22-14 AWG 22-14 AWG 0.5-2.5 sq.mm. 22-14 AWG 22-12 AWG E220514 0.5-4 sq.mm. 22-12 AWG 600V 800V 600V 600V 750V 600V 600V 750V 600V 600V 750V 600V 65 A 57 A 65 A 20A 24 A 20 A 20A 24 A 20 A 25A 32 A 25 A Cat. No. Std. Pk. CSC10T 100 CSC2.5T1-2 100 CSC2.5T2-2 50 CSC4T1-2 50 EPCSC10T 50 EPCSC2.5T1-2 50 EPCSC2.5T2-2 50 EPCSC4T1-2 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA801/4 100 CA801/1 CA801/1-3 100 100 CA801/1 CA801/1-3 100 100 CA801/2 CA801/2-3 100 100 CA901/1 100 CA901/1 100 CA901/2 100 MT5 100 MT5 100 MT6 100 MT10 100 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. *UL& CSA pending. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 53 CSC4T2-2 Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Approvals Wire Range Voltage Rating Current Rating CSC6T1-2 ADL2.5 6 mm 8 mm 5 mm 42 x 105 mm 45 x 94 mm 50 x 79.5 mm 9 mm 12 mm 9 mm Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 4 spring clamps & 2 slots for interconnection 3 spring clamps & 2 slots for interconnection 4 spring clamps & 4 slots for interconnection C US 22-12 AWG E220514 0.5-4 sq.mm. 22-12 AWG 600V 750V 600V 25 A 32 A 25 A Cat. No. Std. Pk. C * * US 22-8 AWG E220514 0.5-6 sq.mm. 22-8 AWG 600V 800V 600V 50 A 41 A 50 A Cat. No. C * US E220514 22-14 AWG 2.5 sq.mm. 22-14 AWG 600V 500V 600V 20 A 24 A 20 A Std. Pk. Cat. No. Std. Pk. Terminal Block CSC4T2-2 50 CSC6T1-2 50 ADL2.5 50 End Plate EPCSC4T2-2 50 EPCSC6T1-2 50 EPADL2.5 50 for ordering information refer to page 63 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 Jumpers Adjacent Alternate CA801/2 CA801/2-3 100 100 CA801/3 CA801/3-3 100 100 CA801/1 CA801/1-3 100 100 Push in type wire jumper CA901/2 100 CA901/3 100 CA901/1 100 Marking Tags (MT Type) MT6 100 MT8 100 MT5 DIN Rail for ordering information refer to page 62 End Stop 100 *UL & CSA pending. 54 * Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com ASF4 Spring Clamp Fuse Terminal Blocks Altech offers `Screwless' Spring Clamp Fuse Terminal Blocks. ASF4(L)* NEW NEW DESIGN DESIGN The terminal has a moving type hinged carrier that has specially designed space for cartridge type glass fuse of size O 5 x 20 or O 5 x 25 mm. The fuse can be engaged or disengaged by the movement of the carrier. Cross connection is possible with specially designed push-in type jumpers. Terminal Width 8 mm 8 mm Height x Length 60 x 80 mm 60 x 80 mm Stripping Length 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 2 spring clamps & 2 slots for interconnection 2 spring clamps & 2 slots for interconnection Tyoe of fuse used O5x20, O5x25mm O5x20, O5x25mm Fusion Voltage Approvals 24V AC/DC, 48V AC/DC 110V AC/DC, 220V AC C 1 1 US E220514 C 1 1 US E220514 Wire Range 22-10 AWG Voltage Rating 600 V 500 V 600 V Current Rating 8A 6.3 A 8A Cat. No. Std. Pk. Terminal Block ASF4 100 ASF4(L)* 100 End Plate EPASF4 50 EPASF4 50 CA702 CA802 50 50 CA702 CA802 50 50 Insulated Jumper (2 pole) CA801/7 100 CA801/7 100 Marking Tags (MT Type) MT8 100 MT8 100 0.5-4 sq.mm 22-10 AWG 22-10 AWG 0.5-4 sq.mm 22-10 AWG 600 V 500 V 600 V 8A 6.3 A 8A Cat. No. Std. Pk. DIN Rail for ordering information refer to page 62 End Stop COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown for ordering information refer to page 63 Ordering Suffix R BU BL O G Y W BG DB 1 UL & CSA pending. * Add required voltage to part number as a suffix. i.e. ASF4(L)/24 for 24V AC/DC. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 55 CSCG2.5T Spring Clamp Ground (Earth) Terminal Blocks CSCG4T Altech offers `Screwless' Spring Clamp Ground Terminal Blocks. Specially designed alloy feet helps inachieving very low contact resistance and vibration proof grounding. CSCG series terminals can be mounted on Din 35 rail along with other terminal blocks of CSC series. The terminal block profile matches with that of CSC terminal block of same wire size. Special features of CSCG terminal blocks are: Terminal Width 5 mm 6 mm Height x Length 36 x 58 mm 42 x 65 mm Stripping Length 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 2 spring clamp connection, grounding through alloy feet 2 spring clamp connection, grounding through alloy feet * Vibration proof grounding * Very low contact resistance because of special alloy feet * Drop-on grounding connection Approvals * Spring clamp to accept solid and stranded wire Wire Range C * * US E220514 22-14 AWG 0.5-2.5 sq.mm 22-14 AWG C US 22-12 AWG E220514 0.5-4 sq.mm Voltage Rating 800 V 800 V Current Rating 24 A 32 A Cat. No. Terminal Block Std. Pk. Cat. No. 22-12 AWG Std. Pk. CSCG2.5T 100 CSCG4T 100 MT5 100 MT6 100 DIN Rail for ordering information refer to page 62 Marking Tags (MT Type) *UL & CSA pending. 56 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com CSCG6T CSCG10T Terminal Width 8 mm 10 mm Height x Length 45 x 72 mm 50 x 75 mm Stripping Length 12 mm 12 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 2 spring clamp connection, grounding through alloy feet 2 spring clamp connection, grounding through alloy feet Approvals Wire Range C * * US 22-8 AWG E220514 0.5-6 sq.mm 22-8 AWG C * * US 16-6 AWG E220514 0.5-10 sq.mm Voltage Rating 800 V 800 V Current Rating 41 A 57 A Cat. No. Terminal Block Std. Pk. Cat. No. 16-6 AWG Std. Pk. CSCG6T 50 CSCG10T 50 MT8 100 MT10 100 DIN Rail for ordering information refer to page 62 Marking Tags (MT Type) *UL & CSA pending. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 57 CSCP2.5T Panel Mount Spring Clamp Terminals Altech "screwless" spring clamp panel mount terminal blocks are an excellent solution for extremely compact wiring applications. These terminal blocks are "add-on" type and can be combined to form Terminal Width multi-pole assemblies. The stacked assembly is fitted with mounting end Height x Length sections on both ends for Stripping Length easy installation on to the panel. The terminal has marker holding recessess on three sides to accept marking tags. Cross connection can be achieved with the aid of insulated jumpers. CSCP2.5T2 5 mm 10 mm 27 x 35 mm 27 x 35 mm 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 2 spring clamp connections 4 common spring clamp connections C Approvals US E220514 US E220514 Wire Range 22-14 AWG Voltage Rating 600 V 750 V 600 V 600 V 750 V 600 V 20 A 24 A 20 A 20 A 24 A 20 A The CSCP2.5T2 panel Current Rating mount terminal blocks have two connection points on each side all with the same potential. The terminals provide possibility of further mul- Terminal Block tiplication through End Section jumpering. 0.5-2.5 sq.mm 22-14 AWG C Cat. No. Std. Pk. 22-14 AWG Cat. No. 0.5-2.5 sq.mm 22-14 AWG Std. Pk. CSCP2.5T 100 CSCP2.5T2 100 EPCSCP2.5T 50 EPCSCP2.5T 50 Insulated Jumper (2 pole) CA803/1 100 CA803/1 100 Operating Tool SCA2-5 1 SCA2-5 1 Marking Tags (MT Type) MT4 (set of left and right) EPCSCP2.5T 100 MT3 100 CSCP2.5T2 COLOR BLOCKS EPCSCP2.5T (other than grey standard) When ordering please add color suffix to Cat. No. CSCP2.5T Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown 58 Ordering Suffix R BU BL O G Y W BG DB Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Custom Assemblies Available * Most competitive in industry * Made to your specifications * Large inventory of parts * Variety of colors available * Custom marking tags * Up to 6' custom assemblies Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 59