Transistors
1
Publication date: December 2002 SJC00056CED
2SB0789, 2SB0789A (2SB789, 2SB789A)
Silicon PNP epitaxial planar type
For low-frequency driver amplification
■Features
•High collector-emitter voltage (Base open) VCEO
•Large collector power dissipation PC
■Absolute Maximum Ratings Ta = 25°C
■Electrical Characteristics Ta = 25°C ± 3°C
4.5±0.1
3.0±0.15
45˚
2.6±0.1
0.4 max.
1.6±0.2 1.5±0.1
4.0
2.5±0.1
3˚
+0.25
–0.20
1.0+0.1
–0.2
0.5±0.08 0.4±0.04
0.4±0.08
123
1.5±0.1
3˚
Parameter Symbol Rating Unit
Collector-base voltage 2SB0789 VCBO −100 V
(Emitter open)
2SB0789A
−120
Collector-emitter voltage 2SB0789 VCEO −100 V
(Base open)
2SB0789A
−120
Emitter-base voltage (Collector open) VEBO −5V
Collector current IC− 0.5 A
Peak collector current ICP −1A
Collector power dissipation *PC1W
Junction temperature Tj150 °C
Storage temperature Tstg −55 to +150 °C
Unit: mm
1: Base
2: Collector
3: Emitter
MiniP3-F1 Package
Marking Symbol:
• 2SB0789: D
• 2SB0789A: E
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
2. *1: Pulse measurement
*2: Rank classification
Note) *: Print circuit board: Copper foil area of 1 cm2 or more, and the board
thickness of 1.7 mm for the collector portion.
Note) The part number in the parenthesis shows conventional part number.
Parameter Symbol Conditions Min Typ Max Unit
Collector-emitter voltage 2SB0789 VCEO IC = −100 µA, IB = 0 −100 V
(Base open)
2SB0789A
−120
Emitter-base voltage (Collector open) VEBO IE = −10 µA, IC = 0 −5V
Forward current transfer ratio *1hFE1 *2VCE = −10 V, IC = −150 mA 90 220
hFE2 VCE = −5 V, IC = −500 mA 50
Collector-emitter saturation voltage *1VCE(sat) IC = −500 mA, IB = −50 mA − 0.2 − 0.6 V
Base-emitter saturation voltage *1VBE(sat) IC = −500 mA, IB = −50 mA − 0.85 −1.20 V
Transition frequency fTVCB = −10 V, IE = 50 mA, f = 200 MHz 120 MHz
Collector output capacitance Cob VCB = −10 V, IE = 0, f = 1 MHz 30 pF
(Common base, input open circuited)
Rank Q R
hFE1 90 to 155 130 to 220
This product complies with the RoHS Directive (EU 2002/95/EC).
Maintenance/
Discontinued
Maintenance/Discontinued includes following four Product lifecycle stage.
planed maintenance type
maintenance type
planed discontinued typed
discontinued type
Please visit following URL about latest information.
http://www.semicon.panasonic.co.jp/en/
2SB0789, 2SB0789A
2SJC00056CED
VCE(sat) ICVBE(sat) IChFE IC
PC TaIC VCE IC IB
fT IECob VCB
0 16040 12080 14020 10060
0
1.4
1.2
0.4
1.0
0.8
0.2
0.6
Copper plate at the collector
is more than 1 cm2 in area,
1.7 mm in thickness
Collector power dissipation PC (W)
Ambient temperature Ta (°C)
0−12−10−8−2−6−4
0
−1.2
−1.0
− 0.8
− 0.6
− 0.4
− 0.2
T
a
= 25°C
−18 mA
−16 mA
−14 mA −12 mA
−10 mA
− 0.8 mA
− 0.6 mA
− 0.4 mA
− 0.2 mA
I
B
= −20 mA
Collector current I
C
(A)
Collector-emitter voltage V
CE
(V)
0−15−10−5
0
−1.2
−1.0
− 0.8
− 0.6
− 0.4
− 0.2
VCE = −10 V
Ta = 25°C
Base current IB (mA)
Collector current IC (A)
− 0.01
− 0.1 −1−10
− 0.01
− 0.1
−1
−10
−100 I
C
/ I
B
= 10
−25°C
T
a
= 75°C
25°C
Collector-emitter saturation voltage V
CE(sat)
(V)
Collector current I
C
(A)
− 0.01
− 0.1 −1−10
− 0.01
− 0.1
−1
−10
−100 I
C
/ I
B
= 10
T
a
= −25°C
75°C
25°C
Base-emitter saturation voltage V
BE(sat)
(V)
Collector current I
C
(A)
− 0.01
− 0.1 −1−10
0
600
500
400
300
200
100
V
CE
= −10 V
T
a
= 75°C
25°C
−25°C
Forward current transfer ratio h
FE
Collector current I
C
(A)
1 10 100
0
200
160
120
80
40
180
140
100
60
20
V
CB
= −10 V
T
a
= 25°C
Transition frequency f
T
(MHz)
Emitter current I
E
(mA)
−1−10 −100
0
50
40
30
20
10
I
E
= 0
f = 1 MHz
T
a
= 25°C
Collector output capacitance
(Common base, input open circuited) C
ob
(pF)
Collector-base voltage V
CB
(V)
This product complies with the RoHS Directive (EU 2002/95/EC).
Maintenance/
Discontinued
Maintenance/Discontinued includes following four Product lifecycle stage.
planed maintenance type
maintenance type
planed discontinued typed
discontinued type
Please visit following URL about latest information.
http://www.semicon.panasonic.co.jp/en/
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
– Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.
Maintenance/
Discontinued
Maintenance/Discontinued includes following four Product lifecycle stage.
planed maintenance type
maintenance type
planed discontinued typed
discontinued type
Please visit following URL about latest information.
http://www.semicon.panasonic.co.jp/en/
