Zener Diodes: 1N5333B - 1N5388B Features: tZener voltage range: 3.3V to 200V tSurge rating of up to 180W @ 8.3mS DO - 201AE Mechanical Data: tCase DO-201AE tMax lead temp for soldering: 260oC, 1/16in from case for 10sec tPolarity: cathode band tMarking: type number tApprox weight: 0.032ounces, 0.9grams Dimensions in mm Dimensions in millimeters Maximum Ratings & Electrical Characteristics: Ratings at 25o Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate by 20%. Symbol: Value: Unit: 5.0 40.0 W mW/oC Zener Current (see Table Characteristics) DC Power dissipation @ T L=75, measure at zero lead length (Fig1) PD decerate above 75 (Note 1) Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (JEDEC Method)(Note1,2) IFSM Junction Temperature TJ Storage Temperature Range TS Notes: 1. Mounted on 8.0mm2 copper pads to each terminal 2. 8.3mS single half sine-wave, or equivalent square wave, duty cycle=4 pulses per minute maximum O[[W!^^^MHYULSSJVT O[[W!^^^UL^HYRJVT O[[W!^^^JWJJV\R A -55 - +150 o C -55 - +150 o C Electrical Characteristics: Tamb=25 C o Type (Note 1): Zener Voltage (Note 2) VZ@IZT Maximum Zener Impedance (Note 2): Maximum Reverse Leakage Current: VZ (Note 4) V IZM (Note 5) mA (V) (mA) IZT ZZT@IZT ZZT@IZK =1A () (A) (V) 1N5333B 3.3 380 3.0 400 300 1.0 20 0.8 1440 1N5334B 3.6 350 2.5 500 150 1.0 18.7 0.80 1320 1N5335B 3.9 320 2.0 500 50 1.0 17.6 0.54 1220 1N5336B 4.3 290 2.0 500 10 1.0 16.4 0.49 1100 1N5337B 4.7 260 2.0 450 5.0 1.0 15.3 0.44 1010 1N5338B 5.1 240 1.5 400 1.0 1.0 14.4 0.39 930 1N5339B 5.6 220 1.0 400 1.0 2.0 13.4 0.25 865 () IR IR (Note 3) A VR 1N5340B 6.0 200 1.0 300 1.0 3.0 12.7 0.19 790 1N5341B 6.2 200 1.0 200 1.0 3.0 12.4 0.10 765 1N5342B 6.8 175 1.0 200 10 5.2 11.5 0.15 700 1N5343B 7.5 175 1.5 200 10 5.7 10.7 0.15 630 1N5344B 8.2 150 1.5 200 10 6.2 10.0 0.20 580 1N5345B 8.7 150 2.0 200 10 6.6 9.5 0.20 545 1N5346B 9.1 150 2.0 150 7.5 6.9 9.2 0.22 520 1N5347B 10 125 2.0 125 5.0 7.6 8.6 0.22 475 1N5348B 11 125 2.5 125 5.0 8.4 8.0 0.25 430 1N5349B 12 100 2.5 125 2.0 9.1 7.5 0.25 395 1N5350B 13 100 2.5 100 1.0 9.9 7.0 0.25 365 1N5351B 14 100 2.5 75 1.0 10.6 6.7 0.25 340 1N5352B 15 75 2.5 75 1.0 11.5 6.3 0.25 315 1N5353B 16 75 2.5 75 1.0 12.2 6.0 0.30 295 1N5354B 17 70 2.5 75 0.5 12.9 5.8 0.35 280 1N5355B 18 65 2.5 75 0.5 13.7 5.5 0.40 264 1N5356B 19 65 3.0 75 0.5 14.4 5.3 0.40 250 1N5357B 20 65 3.0 75 0.5 15.2 5.1 0.40 237 1N5358B 22 50 3.5 75 0.5 16.7 4.7 0.45 216 1N5359B 24 50 3.5 100 0.5 18.2 4.4 0.55 198 1N5360B 25 50 4.0 110 0.5 19.0 4.3 0.55 190 1N5361B 27 50 5.0 120 0.5 20.6 4.1 0.60 176 1N5362B 28 50 6.0 130 0.5 21.2 3.9 0.60 170 1N5363B 30 40 8.0 140 0.5 22.8 3.7 0.60 158 1N5364B 33 40 10 150 0.5 25.1 3.5 0.60 144 1N5365B 36 30 11 160 0.5 25.1 3.5 0.60 144 1N5366B 39 30 14 170 0.5 29.7 3.1 0.65 122 1N5367B 43 30 20 190 0.5 32.7 2.8 0.70 110 O[[W!^^^MHYULSSJVT O[[W!^^^UL^HYRJVT O[[W!^^^JWJJV\R Electrical Characteristics: Tamb=25 C o Type (Note 1): Zener Voltage (Note 2) VZ@IZT Maximum Zener Impedance (Note 2): Maximum Reverse Leakage Current: VZ (Note 4) V IZM (Note 5) mA (V) (mA) IZT ZZT@IZT ZZT@IZK =1A () (A) (V) 1N5368B 47 25 25 210 0.5 35.8 2.7 0.80 100 1N5369B 51 25 27 230 0.5 38.8 2.5 0.90 93 1N5370B 56 20 35 280 0.5 42.6 2.3 1.00 86 1N5371B 60 20 40 350 0.5 45.5 2.2 1.20 79 () IR IR (Note 3) A VR 1N5372B 62 20 42 400 0.5 47.1 2.1 1.35 76 1N5373B 68 20 44 500 0.5 51.7 2.0 1.5 70 1N5374B 75 20 45 620 0.5 56.0 1.9 1.6 63 1N5375B 82 15 65 620 0.5 62.2 1.8 1.8 58 1N5376B 87 15 75 760 0.5 66.0 1.7 2.0 54.5 1N5377B 91 15 75 760 0.5 69.2 1.6 2.2 52.5 1N5378B 100 12 90 800 0.5 76.0 1.5 2.5 47.5 1N5379B 110 12 125 1000 0.5 83.6 1.4 2.5 43.0 1N5380B 120 10 170 1150 0.5 91.2 1.3 2.5 39.5 1N5381B 130 10 190 1250 0.5 98.8 1.2 2.5 36.6 1N5382B 140 8.0 230 1500 0.5 106 1.2 2.5 34.0 1N5383B 150 8.0 330 1500 0.5 114 1.1 3.0 31.6 1N5384B 160 8.0 350 1650 0.5 122 1.1 3.0 29.4 1N5385B 170 8.0 380 1750 0.5 129 1.0 3.0 28.0 1N5386B 180 5.0 430 1750 0.5 137 1.0 4.0 26.4 1N5387B 190 5.0 450 1850 0.5 144 0.9 5.0 25.0 1N5388B 200 5.0 480 1850 0.5 152 0.9 5.0 23.6 Notes: 1. TOLERANCE AND VOLTAGE DESIGNATION-The JEDEC type numbers shown indicate a tolerance of 5% with guaranteed limits on only VZ, IR, IR, and VF as shown in the electrical characteristics table. 2. ZENER VOLTAGE (VZ) AND IMPEDANCE (ZZT & ZZK) - Test conditions for zener voltage and impedance are as follows; IZ is applied 4010mS prior to reading. Mounting contacts are located from the inside edge of mounting clips to the body of the diode. 3. SURGE CURRENT (IR pulse width between 1mS by plotting the applicable points on logarithmic paper. Examples of this, using the 6.8v and 200v 4.VOLTAGE REGULATION (VZ) - Test conditions for voltage regulation are as follows: VZ measurements are the made at 10% and then at 50% of the IZ max value listed in the electrical characteristics table. The test currents are the same for the 5% and 10% in NOTE 2. 5.MAXIMUM REGULATOR CURRENT (IZM) - The actual IZM for any device may not exceed the value of 5 watts divided by the actual VZ of the device. TL=75oC at 3/8" maximum from the device body. O[[W!^^^MHYULSSJVT O[[W!^^^UL^HYRJVT O[[W!^^^JWJJV\R Zener Diodes: 1N5333B - 1N5388B Ratings & Characteristic Curves O[[W!^^^MHYULSSJVT O[[W!^^^UL^HYRJVT O[[W!^^^JWJJV\R Zener Diodes: 1N5333B - 1N5388B Ratings & Characteristic Curves O[[W!^^^MHYULSSJVT O[[W!^^^UL^HYRJVT O[[W!^^^JWJJV\R