1
Introduction
The Everlight ACTION series AC LED
embraces the simple electrical concepts
of a Bridge Rectifier. This allows the
ACTION to operate easily with an AC
source without needing many additional
IC’s, which reduce reliability and increase cost to a system. The ACTION
demonstrates useable, high light output efficiency from a direct AC source and
allows for unique lighting fixture designs. The ACTION’s thermal management,
efficiency, and energy savings performance exceeds that of other power LED
solutions by incorporating green, state of the art design and efficient thermal
emission material. It is an ideal light source for many simple general
illumination applications.
Features Applications
u Direct AC power operation
u High efficiency
u Energy savings
u Low thermal resistance
u Longlife time
u SMT Solderability
u Lead free
u RoHS compliant
u General Lighting
u Decorative Lighting
u Task Lighting
u Household Lighting
u Architectural Lighting
u Pathway Lighting
Product Specification (Preliminary)
Everlight ACTION
AC LED Series
Take Action with the Everlight ACTION for your Lighting Applications…
2
Mechanical Dimension for ELAC-1XXX
1W 100/110VAC
Note
1. Dimensions are in millimeters.
2. Tolerances unless mentioned are ± 0.25mm.
3. Do not handle the device by the lens. Incorrect force applied to the lens may lead to the
failure of devices.
4. The thermal pad is electrically isolated from the anode and cathode contact pads.
3
Mechanical Dimension for ELAC-4XX1
4W 100/110VAC
Note
1. Dimensions are in millimeters.
2. Tolerances unless mentioned are ± 0.25mm.
3. Do not handle the device by the lens. Incorrect force applied to the lens may lead to the
failure of devices.
4. The thermal pad is electrically isolated from the anode and cathode contact pads.
4
Mechanical Dimension for ELAC-4XX2
4W 220/230VAC
Note
5. Dimensions are in millimeters.
6. Tolerances unless mentioned are ± 0.25mm.
7. Do not handle the device by the lens. Incorrect force applied to the lens may lead to the
failure of devices.
8. The thermal pad is electrically isolated from the anode and cathode contact pads.
5
Product Nomenclature
The product name is designated as below:
ELAC - ABCD - EFGH - IJKL - MN
ELAC: Everlight ACTION Series
Production Number
AAAAA = Power Consumption
BCAAA = Color Region
DAAAA = Voltage Source
EAAAA = Lens Type
FGAAA = Luminous Flux Range
HAAAiii = Voltage Bin
IJKLiiCI = CIE X-Y Coordinates Bin Code, or Dominant Wavelength
MILAAA= Internal Code
NIiiAAA = Packing type
[A] Power Consumption
Code Power Consumption
1 1 W, 8mm Diameter Lead Frame Package
2 2 W, 12mm Diameter Lead Frame Package
(Not Yet Available
*
)
4 4 W, 12mm Diameter Lead Frame Package
[BC] Color Region
C
ode
Color
Definition
GT High Efficacy Cool White(4745~7050K)
LM High Efficacy Warm White(2580~3710K)
-- Other Colors
(Not Yet Available
*
)
Please refer to Pages 10-12 for details.
[D] Voltage Source
Code Operating Voltage
1 100V/110V
2 220V/230V
[E] Lens Type
Code Lens Type
L Lambertian
-- Other Lenses
(Not Yet Available
*
)
[FG] Luminous Flux Range
Please refer to Page 9 for details.
[H] Voltage Bin
Code Range of Divided Bins
A 1+2+3+4+5+6
B 5+6+7+8+9+10
C 11+12+13+14+15
Please refer to Page 9 for details.
[IJKL] Color Bin or CCT Bin
Please refer to Pages 10-12 for details.
[M] Internal Code
[N] Packing type
Code Packaging Type
R Tape Reel
B Tube
- -
* Please contact sales for more information and scheduling. For details refer to page 24.
6
Absolute Maximum Ratings
Parameter Symbol Series Ratings Unit
Operating Voltage[1] Vopt
ELAC-1XXX
125
Vrms ELAC-4XX1
125
ELAC-4XX2
265
Power Dissipation[2] Pd
ELAC-1XXX
1.8
W
ELAC-4XXX
6.4
ESD Resistance - All
2000 V
Junction Temperature TJ All 125
Operating Temperature TOpt All -40 ~ +85
Storage Temperature TStge All -40 ~ +100
Soldering Temperature TSol All 260
[1] The operating Voltage does not indicate the maximum voltage which customers use. It represents the LED’s maximum acceptable
input voltage according to the voltage variation in different countries. It is recommended that the temperature of lead frame should
remain below 70°C.
[2] Power Dissipation does not include resistor. Resistor values listed in the Application Note.
7
Electro-Optical Characteristics
Electrical Characteristics (T Soldering=25ºC)
Parameter Symbol Series Min Typ. Max Unit
Operating Current Iopt
ELAC-1XXX - 10 -
mA
[RMS]
ELAC-4XX1 - 40 -
ELAC-4XX2 - 20 -
Operating Frequency Fq All - 50/60 - Hz
Power Dissipation[3] Pd
ELAC-1XXX - 0.9 -
W
ELAC-4XXX - 3.3 -
[3] Power Dissipation does not include resistor. Resistor values listed in the Application Note.
Optical Characteristics (T Soldering=25ºC)
ELAC 1W Series
Parameter Symbol Series Min Typ. Max Unit
Brightness[4] Фv
ELAC-1GTX
-
55 -
lm
ELAC-1LMX 45
CRI Ra
ELAC-1GTX - 75 -
-
ELAC-1LMX - 80 -
View Angle[5] Deg. All - 130 - deg.
ELAC 4W Series
Parameter Symbol Series Min Typ. Max Unit
Brightness[4] Фv
ELAC-4GTX
-
220
- lm
ELAC-4LMX 160
CRI Ra
ELAC-4GTX - 75 -
-
ELAC-4LMX - 80 -
View Angle[5] Deg. All - 130 - deg.
[4] Luminous Flux measurement tolerance: ±10%.
[5] View angle tolerance is ±10°.
8
Current Available Part Numbers
ELAC 1W Series
Part Number
Operating
Voltage Luminous Flux
Correlated Color
Temperature
Voltage
Bin
ELAC-1GT1-LFGA-5060-XX 100/110 VAC 48-100lm Cool White 5000-6020K 80-92 V
ELAC-1GT1-LFGB-5060-XX 100/110 VAC 48-100lm Cool White 5000-6020K 88-100V
ELAC-1LM1-LEFA-2832-XX 100/110 VAC 33-69lm Warm White 2870-3220K 80-92 V
ELAC-1LM1-LEFB-2832-XX 100/110 VAC 33-69lm Warm White 2870-3220K 88-100V
Please refer to Page 9-12 in details.
ELAC 4W Series
Part Number
Operating
Voltage Luminous Flux
Correlated Color
Temperature
Voltage
Bin
ELAC-4GT1-LMPA-5060-XX 100/110 VAC 180-255lm Cool White 5000-6020K 80-92 V
ELAC-4GT1-LMPB-5060-XX 100/110 VAC 180-255lm Cool White 5000-6020K 88-100V
ELAC-4GT2-LMPC-5060-XX
220/230 VAC 180-255lm Cool White 5000-6020K 175-200V
ELAC-4LM1-LJLA-2832-XX 100/110 VAC 130-180lm Warm White 2870-3220K
80-92 V
ELAC-4LM1-LJLB-2832-XX 100/110 VAC 130-180lm Warm White 2870-3220K
88-100V
ELAC-4LM2- LJLC-2832-XX 220/230 VAC 130-180lm Warm White 2870-3220K
175-200V
Please refer to Page 9-12 in details.
9
Luminous Flux Binning Code [6] [7]
Divided Bin Luminous Flux [6] [7]
E 33-48
F 48-69
G 69-100
H 100-130
J 130-150
K 150-165
L 165-180
M 180-200
N 200-225
P 225-255
Q 255-290
R 290-330
[6] Luminous Flux measurement tolerance: ±10%. Divided bins will be marked on packaging.
[7] For Bin Code selection, specify the minimum and maximum Divided Bin in part number.
Bin Code selection restricted to a typical of 2 Divided Bins.
Voltage Binning [8]
Voltage Bin Code
Code Group of Divided Bins
A 1+2+3+4+5+6
B 5+6+7+8+9+10
C 11+12+13+14+15
Range of the Divided Bins
Rank Minimum Voltage (Vrms) Maximum Voltage (Vrms)
1 80.0 82.0
2 82.0 84.0
3 84.0 86.0
4 86.0 88.0
5 88.0 90.0
6 90.0 92.0
7 92.0 94.0
8 94.0 96.0
9 96.0 98.0
10 98.0 100.0
11 175.0 180.0
12 180.0 185.0
13 185.0 190.0
14 190.0 195.0
15 195.0 200.0
[8]Forward Voltage measurement tolerance: ±1V. Rank will be marked on packaging.
10
Warm -White Bin Coordinates [9]
Bin Code Reference Range
2528 2580K ~ 2870K
2832 2870K ~ 3220K
3237 3220K ~ 3710K
Bin Code Divided bin CIE X CIE Y Divided bin CIE X CIE Y
2528
27-1
0.469 0.429
27-3
0.447 0.408
0.459 0.410 0.437 0.389
0.470 0.413 0.448 0.392
0.481 0.432 0.459 0.410
27-2
0.456 0.426
27-4
0.459 0.410
0.447 0.408 0.448 0.392
0.459 0.410 0.459 0.394
0.469 0.429 0.470 0.413
2832
30-1
0.443 0.421
30-3
0.422 0.399
0.435 0.403 0.415 0.381
0.447 0.408 0.426 0.385
0.456 0.426 0.435 0.403
30-2
0.430 0.417
30-4
0.435 0.403
0.422 0.399 0.426 0.385
0.435 0.403 0.437 0.389
0.443 0.421 0.447 0.408
3237
35-1
0.415 0.409
35-3
0.394 0.385
0.408 0.392 0.389 0.369
0.422 0.399 0.402 0.375
0.430 0.417 0.408 0.392
35-2
0.400 0.402
35-4
0.408 0.392
0.394 0.385 0.402 0.375
0.408 0.392 0.415 0.381
0.415 0.409 0.422 0.399
[9]Color Coordinates measurement tolerance: ±5%
11
Cool -White Bin Coordinates [9]
Bin Code Reference Range
4757 4745K ~ 5700 K
5060 5000K ~ 6020K
5365 5310K ~ 6500K
5770 5700K ~ 7050K
Bin Code Divided bin CIE X CIE Y Divided bin CIE X CIE Y
4757
50-1
0.346 0.369
50-3
0.337 0.349
0.345 0.356 0.337 0.337
0.353 0.362 0.344 0.343
0.355 0.376 0.345 0.356
50-2
0.338 0.362
50-4
0.345 0.356
0.337 0.349 0.344 0.343
0.345 0.356 0.352 0.349
0.346 0.369 0.353 0.362
57-1
0.329 0.354
57-4
0.329 0.342
0.329 0.342 0.329 0.331
0.337 0.349 0.337 0.337
0.338 0.362 0.337 0.349
5060
50-2
0.338 0.362
50-3
0.337 0.349
0.337 0.349 0.337 0.337
0.345 0.356 0.344 0.343
0.346 0.369 0.345 0.356
57-1
0.329 0.354
57-3
0.321 0.335
0.329 0.342 0.322 0.324
0.337 0.349 0.329 0.331
0.338 0.362 0.329 0.342
57-2
0.321 0.346
57-4
0.329 0.342
0.321 0.335 0.329 0.331
0.329 0.342 0.337 0.337
0.329 0.354 0.337 0.349
12
Group Divided bin CIE X CIE Y Divided bin CIE X CIE Y
5365
57-1
0.329 0.354
57-3
0.321 0.335
0.329 0.342 0.322 0.324
0.337 0.349 0.329 0.331
0.338 0.362 0.329 0.342
57-2
0.321 0.346
57-4
0.329 0.342
0.321 0.335 0.329 0.331
0.329 0.342 0.337 0.337
0.329 0.354 0.337 0.349
65-1
0.312 0.339
65-4
0.313 0.329
0.313 0.329 0.314 0.319
0.321 0.337 0.322 0.326
0.321 0.348 0.321 0.337
5770
57-2
0.321 0.346
57-3
0.321 0.335
0.321 0.335 0.322 0.324
0.329 0.342 0.329 0.331
0.329 0.354 0.329 0.342
65-1
0.312 0.339
65-3
0.305 0.321
0.313 0.329 0.307 0.311
0.321 0.337 0.314 0.319
0.321 0.348 0.313 0.329
65-2
0.303 0.330
65-4
0.313 0.329
0.305 0.321 0.314 0.319
0.313 0.329 0.322 0.326
0.312 0.339 0.321 0.337
[9]Color Coordinates measurement tolerance: ±5%
13
Reflow Soldering Characteristics
- All parameters are maximum body case temperature values and cannot be considered as a soldering profile. The body case
temperature was measured by soldering a thermal couple to the soldering point of LEDs.
Preheat
Temperature min. (Tsmin) 150 °C
Temperature max. (Tsmax) 200°C
Time (Tsmin to Tsmax) (ts) 60-120 seconds
Average ramp-up rate (Tsmax to Tp) 3 °C/second max
Other
Liquid’s Temperature (TL) 217 °C
Time above Liquid’s Temperature (t L) 60-150 sec
Peak Temperature (TP) 260°C
Time within 5 °C of Actual Peak Temperature: TP - 5°C 10 s
Ramp- Down Rate from Peak Temperature 6°C /second max.
Time 25°C to peak temperature 8 minutes max.
Reflow times 2 times
Reference: IPC/JEDEC J-STD-020D
14
Typical Wavelength Characteristics
1. Cool-White (Thermal Pad Temperature = 25
)
400 500 600 700
0.0
0.2
0.4
0.6
0.8
1.0
Relative Spectral Distribution
Wavelenght(nm)
2. Warm-White (Thermal Pad Temperature = 25
)
400 500 600 700
0.0
0.2
0.4
0.6
0.8
1.0
Relative Spectral Distribution
Wavelenght(nm)
15
Typical Flux- Thermal Pad Temperature Characteristics
!
"
#
$
%
&
#
'
(
#
)
*
+
#
+
,
Typical Current - Voltage Characteristics
-
-
-
.
.
-
/0
1 2 3
4 5
6
/ 7
8
#
9
9
%
*
:
;
<
$
=
,
16
Typical Relative Luminous Flux vs. Voltage
>
?
>
>
?
@
A
?
>
A
?
@
B
?
>
B
?
@
C
?
>
D> E> F> A>> AA> AB> AC>
G HI J K
LM N O
P Q
R
G S
T
U
V
W
X
Y
Z
U
[
\
]
Y
^
_
\
`
a
V
\
b
c
W
d
\
d
e
Typical Radiation Patterns
0 20 40 60 80 100 120 140 160 180
0.0
0.2
0.4
0.6
0.8
1.0
Relative Intensity Distribution
Degree [deg.]
Note
1. 2θ1/2 is the off axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value.
2. Viewing angle tolerance is ± 10
f
.
-90° -60° -30° 0° 30° 60° 90°
17
Application Note
1. Operating circuit
2. Recommended resistor
i. Everlight ACTION must be used with a resistor.
ii. The tolerance of current is ±5% on each resistance rank.
iii. Resistor table:
ELAC 1W (ELAC-1XXX) Series, 100/110VAC
- Driven at 10mA [RMS]
Voltage
Bin
Minimum
Voltage(Vrms)
Maximum
Voltage(Vrms)
Recommended Resistor
100V 110V
1 80.0 82.0 2.20KΩ 3.20KΩ
2 82.0 84.0 2.00KΩ 3.00KΩ
3 84.0 86.0 1.80KΩ 2.80KΩ
4 86.0 88.0 1.60KΩ 2.60KΩ
5 88.0 90.0 1.40KΩ 2.40KΩ
6 90.0 92.0 1.20KΩ 2.20KΩ
7 92.0 94.0 1.00KΩ 2.00KΩ
8 94.0 96.0 800Ω 1.80KΩ
9 96.0 98.0 600Ω 1.60KΩ
10 98.0 100.0 400Ω 1.40KΩ
Resistor
AC
18
ELAC 4W (ELAC-4XX1) Series, 100/110VAC
Voltage
Bin
Minimum
Voltage(Vrms)
Maximum
Voltage(Vrms)
Recommended Resistor
100V 110V
1 80.0 82.0 550Ω 800Ω
2 82.0 84.0 500Ω 750Ω
3 84.0 86.0 450Ω 700Ω
4 86.0 88.0 400Ω 650Ω
5 88.0 90.0 350Ω 600Ω
6 90.0 92.0 300Ω 550Ω
7 92.0 94.0 250Ω 500Ω
8 94.0 96.0 200Ω 450Ω
9 96.0 98.0 150Ω 400Ω
10 98.0 100.0 50Ω 350Ω
-Driven at 40mA [RMS]
ELAC 4W (ELAC-4XX2) Series, 220/230VAC
Voltage
Bin
Minimum
Voltage(Vrms)
Maximum
Voltage(Vrms)
Recommended Resistor
220V 230V
1 175.0 180.0 2.00KΩ 2.50KΩ
2 180.0 185.0 1.75KΩ 2.25KΩ
3 185.0 190.0 1.50KΩ 2.00KΩ
4 190.0 195.0 1.25KΩ 1.75KΩ
5 195.0 200.0 1.00KΩ 1.50KΩ
-Driven at 20mA [RMS]
19
3. Thermal Management
i. For maintaining the high flux output and achieving reliability, Everlight AC LED series LED
package should be mounted on a metal core printed circuit board (MCPCB) or Aluminum heat
sink with proper thermal connection to dissipate approximately 4W of thermal energy under
100/110V and 220/230V operation.
ii. Special thermal designs are also recommended to take in outer heat sink design, such as FR4
PCB on Aluminum with thermal vias or FPC on Aluminum with thermal conductive adhesive, etc.
iii. Under extreme driving conditions, sufficient thermal management must be implemented or the
die junction temperature may exceed the limit and the LED lifetime will decrease rapidly.
iv. It is recommended that the temperature of the Heat sink should be below 70°C.
Heat sink
MCPCB structure
Recommended supplier
g
Kavano Industrial Co., Ltd
g
TT Electronics
20
4. Proper Handling
To avoid contamination of materials, damage of internal components, and shortening of LED
lifetime, do not subject LEDs to conditions as those listed below.
Bare Hand
T
weezers
When handling the product, do not apply
direct pressure on the resin.
Do not touch the resin to avoid scratching
or other damage.
Pick and Place Nozzle for Surface
Mount Assembly.
During Module Assembly
Avoid directly contacting with nozzle.
Do not stack the modules together, it
could damage the resin or scratch the
lens.
21
Emitter Tube Packaging
For ELAC-1W Series only.
1. Tube 2. Inner Carton
3. Outside Carton
l Packing Quantity
1. 50 pcs / Tube
2. 20 tubes / Inner Carton
3. 12 Inner Cartons / Outside Carton
4. Minimum Order Quantity: 100 pcs
22
Emitter Tape Packaging
For ELAC-2W, 4W Series.
Packing Quantity
1. 400pcs / One Reel
2. Dimensions are in millimeters
3. The tolerances unless mentioned is ±0.1mm
4. Minimum Order Quantity: 100 pcs
Moisture Resistant Packaging
Aluminum moistue-proof bag
Label
Desiccant
Label
Label Aluminum moisture-proof bag Desiccant Label
Feed Direction
23
Emitter Reel Packaging
Note
1. Dimensions are in millimeters
2. The tolerances unless mentioned is ±0.1mm
Product Labeling
Label Explanation
CPN: Customer Specification (when required)
P/N : Everlight Production Number
QTY: Packing Quantity
LOT No: Lot Number
CAT: Rank of Luminous Flux
HUE: Color Rank
REF: Rank of Operating Voltage
MADE IN TAIWAN: Production Place
3
2
35
ELAC-ABCD-EFGH-IJKL-MN
XXX
-
XXX
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXX
24
MSL: Moisture Sensitive Level
* Full explanation of P/N and Bin code is described in “Product Nomenclature” section
25
Global Network
KOREA
EVERLIGHT OPTOELECTRONICS
KROEA CO., LTD.
#302, Yoksamdong 720-2, Kangnamku,
Seoul, Korea
TEL: +82-2-562-8088
FAX: +82-2-562-6588
EMAIL: danieljo@everlight.com
MALAYSIA
EVERLIGHT OPTOELECTRONICS
(M) SDN BHD
B-04-20 Krystal Point,
303 Jalan Sultan Azlan Shah,
11900 Penang, Malaysia
TEL: +60-4-6464233
FAX: +60-4-6465233
EMAIL: inquiry@everlight-pg.com.my
JAPAN
E&E JAPAN CO., LTD.
Kindaikagakysha 7F, 2-7-15, Ichigayatamachi,
Shinjuku-ku, Tokyo, 162-0843, Japan
TEL: +81-(0)3-3267-6761
FAX: +81-(0)3-5225-6771
EMAIL: eejp@eejp.co.jp
www.eejp.co.jp
AMERICA
CALIFORNIA USA
EVERLIGHT AMERICAS INC.
325 Piercy Road San Jose, CA 95138, USA
TEL: +1-408-225-7800
FAX: +1-408-225-7800
EMAIL: salesmkt@everlight.com
www.everlightamericas.com
TEXAS USA
EVERLIGHT AMERICAS INC.
3220 Commander Dr. Suite 100 Carrollton,
Texas, 75006, United States
TEL: +1-972-490-4008
FAX: +1-972-490-5009
EMAIL: salesmkt@everlight.com
everlightinternational.com
CANADA
EVERLIGHT CANADA
4145 North Service Rd., Suite 200 Burlington,
On Canada L7L 6A3
TEL: +1-905-315-5050
FAX: +1-905-336-0040
EMAIL: everligtcanada@everlightinternatinal.com
EUROPE
GERMANY
EVERLIGHT ELECTRONICS EUROPE GMBH
Breite Str. 155, 76135 Karlsruhe Germany
TEL: +49-721-824-473
FAX: +49-721-824-4740
EMAIL: Info@everlight-eu.de
NORDIC
EVERLIGHT ELECTRONICS EUROPE GMBH
Isafjordsgatan 22, 164 40 Kista, Sweden
TEL: +46-8375617-8
EMAIL: nordic@everlight-eu.de
PLANTS
ASIA
TAIWAN
TAICHUNG
EVERLIGHT ELECTRONICS CO., LTD.
hi jklmnop
q
r
st u
vw
xyz
No. 35, Lane Guoguang, 6th Neighborhood
Yutian Village, Yuanli Township,
Miaoli County 35874, Taiwan
TEL: 886-37-741000
FAX: 886-37-740776
EMAIL: marketing@everlight.com,
TAINAN
EVERLIGHT ELECTRONICS CO., LTD.
hi h{ |} ~
xyz
s
Room 6, 8F, 395, Sec. 1, Linseng Rd.,
East District, Tainan 701, Taiwan
TEL: +886-6-235-8282
FAX: +886-6-235-9292
EMAIL: robertchen@everlight.com
CHINA
HONG KONG
EVLITE ELECTRONICS CO., LTD.
sz
ss
Units 1606-1608, 16/F, Modern Warehouse,
6 Shing Yip Street, Kwun Tong, Kowloon,
Hong Kong
TEL: +852-23880602
FAX: +852-23881127, 23843092
EMAIL: hkcm@everlight.com
GUANGZHOU
EVERLIGHT ELECTRONICS (BVI) CO., LTD
u
}| ~
¡¢
£y£
205 2F, Business Building Shatou,
East Yushan Rd., Panyu Town, Guangzhou,
PRC, China
Postcode: 511490
TEL: +86-(0)20-84663392
FAX: +86-(0)20-84663372
EMAIL: chcm@everlight.com
SUZHOU
EVERLIGHT ELECTRONICS (CHINA) CO., LTD
u
¤¥¥|¦ ~§¨
xz
©£ª
«
x¬s
Binhe Rd. 1388, X2 Creative Block A-608,
Suzhou City, Jiangsu Province, PRC, China
Postcode: 215011
TEL: +86-(0)512-68021303 68631358
FAX: +86-(0)-512-68021302 68631348
EMAIL: chsha@everlight.com
TIANJIN
EVERLIGHT ELECTRONICS (BVI) CO., LTD
u
®|
¨ ~
£z
¯°
±²
³
£

No. 2109, Vanke Center Building, No. 290,
Zhongshan Rd., Hebei District, Tianjin, China
Postcode: 300141
TEL: +86-22-26351122, 26351133
EMAIL: chsha@everlight.com
TAIWAN
TAIPEI
EVERLIGHT ELECTRONICS CO., LTD.
hi h
l´
µ| ·
¸s
w
£yz
Everlight Electronics Co., Ltd
25, Lane 76, Sec 3, Chung Yang Rd
TuCheng, Taipei 23671, Taiwan
TEL: +886-2-22672000
FAX: +886-2-22698197
YUAN-LI
EVERLIGHT ELECTRONICS CO., LTD.
hi jklmno p
q
r
st u
vw
xyz
No. 35, Lane Guoguang, 6th
Neighborhood
Yutian Village, Yuanli Township,
Miaoli County 35874, Taiwan
TEL: 886-37-741000
FAX: 886-37-740776
CHINA
GUANGZHOU
EVERLIGHT ELECTRONICS (BVI) CO., LTD
u
} ~¹º
»
¼
~
¸½¾
7C, B/5, Building,
Lian Hua Shan Port Industry District
Pan Yu, Guang Zhou, China
TEL: +86-20-84865918, 84860913
FAX: +86-20-84860600
SUZHOU
EVERLIGHT ELECTRONICS (CHINA) CO., LTD
u
¤¥¿
¤|ÀÁoÂÃ ÄÅ~
ÆÇ
~
£
xyz È É
ÊËÌ
Í
2135, Zhong Shan N. Rd,
WuJiang Economy Development Zone
SongLing Town, WuJiang City,
Jiang Su, PRC, China
TEL: +86-512-63409123
FAX: +86-512-63409162
Taiwan Headquarters
NO.25, LANE 76, SEC. 3 , CHUNG YANG RD., TUCHENG 236, TAIPEI, TAIWAN 23671
Î
ÏÐ Ñ
ÒÓÔ
Õ
Ö ×Ø
76
Ù
25
Ú
TEL : +886-2-2267-2000 FAX : +886-2-2267-6244 2267-6189
www.everlight.com
26
Revision History
Current version: 2010/01/21
Previous version: 2.0
Device No. Preliminary
Rev.1.0
Page Subjects (major change in previous version) Date of change